Modern Gauges for an OLD Truck

Подписаться 24 тыс.

Просмотров 16 тыс.

50% 1

I install a new set of Dakota Digital HDX gauges on my 1993 Silverado. Be sure to see what Dakota Digital has for your build!
Parts List:
HDX Gauges - www.dakotadigital.com/index.c...
Gear Shift Sending Unit - www.dakotadigital.com/index.c...
Thank you to the build sponsors:
Mirror Image Auto Body - mirrorimageautobody.net/
LMC Truck - www.lmctruck.com/
Belltech Suspension - www.belltech.com/
Dakota Digital Gauges - www.dakotadigital.com/
AZA Auto Wheel - azaautowheel.com/
Florida Paint Supply
AutoAura Paint - www.autoauracoatings.com/
Indasa Abrasives - www.indasa-abrasives.com/
Clear Coat Solutions - csishine.com/
Contact the builder:
FB - Josh McPherson
IG - @bazertheblazer
TikTok - @bazertheblazer
Magazine Subscriptions!
Street Trucks:
IG - @streettrucks
FB - streettrucks
Magazine - engagedmediamags.com/automotive
C10 Builders Guide:
IG - @c10buildersguide
Magazine - engagedmediamags.com/automotive
OBS Builders Guide:
IG - @obsbuildersguide
FB - groups/obsbuildersguide
F100 Builders Guide:
IG - @f100buildersguideofficial
Magazine - engagedmediamags.com/automotive
#chevrolet #duallypacetruck #streettrucks

Развлечения

Опубликовано:

29 мар 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@Blitz0065 Год назад

Definitely like the DD gauges over the stock.

@motortopiaondemand Год назад

Same here!

@jeffripper7234 Год назад

Bud enjoying videos , glad to meet ya at show this pass weekend 👍👍👍

@motortopiaondemand Год назад

Great meeting you too! I’m sure we’ll see each other again very soon

@rubenr7650 Год назад

I'll rather keep the original gauges on my obs but the Dakota digital still looks clean

@motortopiaondemand Год назад

I think I’m going to hang mine up for decoration. I like the look but they were too far gone to reuse.

@rubenr7650 Год назад

@@motortopiaondemand that would be a good decoration piece somewhere

@GNaron Год назад

I went with the NEW VINTAGE USA instrument panel/gauge cluster in my 1993 Chevy C1500 OBS. I like the NEW VINTAGE gear selector indicator better.

@motortopiaondemand Год назад

What’s different about gear selector on the new vintage setup?

@GNaron Год назад

@@motortopiaondemand New vintage uses the factory selector. You remove it from factory panel and install on the new vintage pamel. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IRN4NV2wyJI.html

@osielmunoz8534 2 месяца назад

Are they an easy install or do you have to wire them like these too?

@GNaron 2 месяца назад

@@osielmunoz8534 I have a couple vids on my chanel installing NEW VINTAGE USA instrument panel

@cvpiDOTnet Год назад

Great video. I have a Dakota Digital VHX in my 85 C20 LS swapped truck and will be putting one in my 91 S10 LS swapped here soon. I love their clusters for the same reason of the remote control box and the simple plug in of the cluster to the box. Plus Dakota has a great warranty and tech support. Wiring it is really simple and they have many options to make everything work. I would not go with any other cluster, Dakota Digital has the best one out there in my opinion. In addition to the Dakota I have the RetroSound Motor 4 in my 85 Chevy C20 and a Motor 2 New York in my 91 Chevy S10 and as you said you can match the colors. My C20 is red and my S10 will be white. My Motor 4 was a tight fit in the S10, but I was able to mount it without having to remotely wire it like you did. With a good amp and speakers, the RetroSound radios sound great.

@motortopiaondemand Год назад

This is great to hear! Dakota Digital gauges and RetroSound radios are such a great combo.

@fishpony1211 Год назад

Haha i just installed these gauges yesterday but they sent me a faulty module. Cant wait till tomorrow when the module gets in so i can see them finally work. P.s. im almost 110% sure u have that many cts because one is for the computer, one is for the gauge & the last one is what turns on that little fan behind your grill like when you are towing things. Dont quote me on that but im pretty sure.

@motortopiaondemand Год назад

Awesome man! I hope you get them up and running. It's fun customizing them to match your interior. Also, good point on the number of temp sensors. I didn't think about that. I think I'm going to swap the clutch fan out for a dual electric fan setup and use a probe temp relay setup. That should help with regulating temp. These big blocks get hot quick!

@da300mann2 3 месяца назад

I just bought an 89 GMC dually, and I'm going to update everything as well. Where did you find all the plastic trim pieces??

@T0tenkampf Год назад

Have you noticed any design changed in the new dash that will keep it from self destructing like oem? I wont even mess with the square dashes typically, the mounting is weak it seems.

@motortopiaondemand Год назад

The LMC Truck dash looks like a factory replacement. The metal frame is sturdy and I think the OEM dashes failed because of the material used. The LMC Truck dash seems like it will be more durable.

@flare2013 9 месяцев назад

At 3:00 is it possible to find that cubby hole in the dash? I can't find it anywhere.

@juniorstuntbike6657 5 месяцев назад

Hola soy colombiano , le sirve a una k1500 1991 , qué precio tiene ?

@jesusavila6363 25 дней назад

where’d you get the wiring diagram?

@michaelleger7183 Год назад

How are the gauges holding up? Reliable?

@shawnlattimer8924 Год назад

3 temp sensors on the big block is correct. Drivers side head is the gauge. Passenger head is the aux cooling fan. The one on the manifold talks to the computer. I like those gauges but as long as my originals keep working on my trucks I'm gonna keep my money in my wallet.

@motortopiaondemand Год назад

Thanks for clarifying. I was confused because my aux fan was on a switch and I didn’t think they would need 2 others. This is my first big block TBI truck so I’m learning a lot!

@shawnlattimer8924 Год назад

@@motortopiaondemand no problem. If you are keeping the TBI, the wiring for the sensor in the manifold is required to be hooked to a sensor. Once the system goes into closed loop that sensor is a requirement. Any time I have a problem with how a TBI runs I change that sensor first--and it’s usually it.

@motortopiaondemand Год назад

Thanks for the tip! Do you happen to know which sensor would be for the computer? I'll make sure that sensor is still connected.

@shawnlattimer8924 Год назад

@@motortopiaondemand the one on the manifold that is kinda below the coolant return hose is the one for the computer. From the video I think that’s where you put the one for the new gauges.

@motortopiaondemand Год назад

@@shawnlattimer8924 awesome thank you. I’ll be sure to hook that one back up!