MODIFIED AUDI S3 - MAINTENANCE WASH! - CLEAN MACHINE DETAILING 

Juanrramonello Much appreciated!

ToxRozzx I use a leaf blower, it's perfect for the job

lentilsouper Hi pal, The TFR is super diluted, also this vehicle didnt have any wax or sealants on it

happykillmore77 I have no idea, I'm sure the owner will discover your comment and clarify your question!

HI Buddy, you can get a pack of 3 Small Medium and Large for £10 off Ebay. Very good quality. "DETAILING BRUSHES"

Seriously, the colour of the bucket will not make the slightest bit of difference. This detailing stuff is just getting ridiculous.

Ahaha yeah because the colour of the bucket makes a massive difference!! 😂😂 idiot

L khan correct to a certain extent. Its all about dilution ratio. The car washed have it concentrated however we have diluted it to 1:32 which is recommened by the company and also safe on wax. You would need to dilute it 1:4 to strip the surface of waxes or sealants

@@cleanmachinedetailing also one of the main reasons for using TFR is to soften and break down road grime and traffic film so that when you do do the contact wash, there is most of the contaminants removed. Therefore, less chance of swirls and marring.

dylanson, All been updated to 20L meguairs buckets

i have the same buckets there good

Better buckets? A bucket is a bucket haha

@@SpartanCW2000 as long as it holds water and has a grit guard it's sufficient 😂

What spoiler is that?

Na not really mate. Super safe stuff.

CLEAN MACHINE I know mate I was joking keep up the good work

TwistedSoul2002 according to the owner the bumpers from an RS3...therefore that could be the reason why I isn't sat correctly?...

CLEAN MACHINE CLEAN MACHINE If you pause at 1:07 the lines look completely off compared to 1:16. Bonnet needs adjusting and from looking at this, maybe the wings on the RS3 are different to the S3 and that's the reason it's off. Also, how did colour match up against the rest of the car- doesn't look 100% but that may be the phone I'm watching on/ camera not being accurate enough. Bit of a shame as you did a good job on it. 👍🏼

He's cleaning the door jams. Nothing wrong with that. He will just dry off the seats when he's done. If it's not done then salt and road grime will build up and could eventually cause rust.

@@muhammadarfan7113 yeah I clean my door jams too, but manually, because a pressured wash could make all the interior wet and cause mold

@@scuderiamoly What do you mean by manually? The reason why a pressure washer is good us because it actually pushes the dirt off without contact.(No chance of marring/swirls) If you angle the pressure washer correctly then very little water actually goes to the interior.

@@muhammadarfan7113 I usually spray some snow foam to make dirt flush away and then I wash it carefully with a microfiber sponge. And yes you're right, if you angle it correctly interior doesn't get wet but in the video you can see it's not properly angled. But no hate, this wash is art!

@@scuderiamoly Yh I agree. Both ways are fine. If it works for you then keep going. I'm only 19 at the moment. I would like to just save up as much as I can and try and become IMI approved. Then slowly start investing and hopefully one day build a business. Have a good day my friend.