why do we configure a static default route when we are using OSPF. Cant we inject a default route from ISR through ospf (default information originate) inside ACI and not use static route
This is just based on my setup (where I was not redistributing static on OSPF through my ISR) and I also wanted to show how to configure static routes on ACI :)
Absolutely, you can do route leaking between them. Probably not that straight forward though, but here's an article that might help: community.cisco.com/t5/data-center-and-cloud-blogs/cisco-aci-inter-vrf-tenant-route-leaking-design-simplified/ba-p/3820919
Very good explanation however a bit fast speaking....by the time i was grasping the typing done by operator , the operator would have jumped to other section.
We recommend taking this course if possible Manoj: www.cisco.com/c/en/us/training-events/training-certifications/training/training-services/courses/implementing-cisco-application-centric-infrastructure-dcaci.html#~duration
I would also suggest taking a look at these 3 papers www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/guide-c07-743150.html www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-739609.html www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-737855.html
If you are interested in learning more about L3 Outs, this is a great guide to read: www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/guide-c07-743150.html
All videos are recorded at 4K, please adjust the resolution, it is likely that your bandwidth was slow and the video automatically was set to 360. Can you please try again?
@@AmitSingh-qf3th that is extremely weird, I am seeing the video right now on my computer and it has a 4K option available to be selected, not sure why this is happening to you Amit, wish I could be able to help
Finally got the issue it was downloaded 2 year back in RU-vid application with lower picture quality, ecerytime I am playing it is playing the same picture quality now I have removed the downloaded video and now I can change picture quality, very good explanation
@@CiscoDataCenterMadeEasy Thank you for coming back to me, I want to learn these Tenants, BD, L2out, VXLAN (most importantly) and troubleshooting ACI environment. Would you be able to help in theses. Thank you
@@mohdikram322 did you take a look at this playlist? ru-vid.com/group/PL_RJ3HclrYc5oRUi0_iYeIl9yKN4Mwl3b Tenants, BDs: Module 3. L2 Out I would not recommend you use, instead extend an EPG statically, this is covered in the same Module 3. VXLAN is automatically built, therefore, there's not much for you to understand, however we go behind the scenes of what is happening in Module 3 Episode 2 Part 1 and 2. All the episodes have troubleshooting techniques and recommendations. Hope this helps!
@@CiscoDataCenterMadeEasy Great Thank you , i was looking after this series of modules but couldn't find them. Now i can see all the required information I am after. Thank you so much for helping me out with this.