MofoRC X15 Axles! Best 1/24 Axles PERIOD!

Подписаться 25 тыс.

Просмотров 9 тыс.

50% 1

We’ve needed stronger scx24 axles since the thing was released but definitely since we went 3s in everything. They are finally here! But these axles aren’t just strong. They have quite a few other upgrades. Let’s check them out and see why they are a new favorite!
MofoRC X15 Axles available here
www.moforc.com/products/x15-a...
MofoRC X15 Axle Brass parts available here
www.moforc.com/products/x15-a...
MofoRC 33% Od worm gears available here
www.moforc.com/products/bulle...
TRX4M Wheel hex I mention found here
amzn.to/3tu3kLk
Galaxy 3s found here
itgresa.com/product/galaxy-45...
Furitek Cedar motor for scx24 found here
bit.ly/48R5cy0
Complete brushless combo for scx24 found here
bit.ly/48OuKLU
My favorite scx24 servo found here
bit.ly/3KsSZni
To contact me about reviews or questions email me at 2fastmattracing@gmail.com
I finally have Merch!!
Be sure to check the sizing chart and maybe size up on those Hoodies.
Check it out at the website below!!
2fm-rc-shop.fourthwall.com/co...
Don’t forget 2fmrc at checkout for discounts at most of your favorite shops!!
HELP SUPPORT the channel by clicking my affiliate links below and then shopping at no extra cost to you!
Thanks for any help!
AFFILIATE LINKS BELOW
Horizon Hobby affiliate link
bit.ly/3eXihxY
Amainhobbies affiliate link
bit.ly/3CurIyF
FairRc affiliate link here
shrsl.com/3qxuc
FMS Affiliate link here
www.fmshobby.com/jsVeIxtdZHBb...
Amazon affiliate link
amzn.to/3I4tQzI
RCAWD affiliate link here
rcawd.com/?ref=FaSRjm2T
Other DISCOUNT CODES BELOW
FMS discount code is 2fmrc
$10 discount is only applicable to the purchase of complete all vehicles and accessories, and can only be used when the amount is over $50
Injora Discount code is 2fmrc05 for 5% off
MofoRC discount code is 2fmrc
Fullsendrc discount code is 2fmrc
RcAWD discount code is 2fmrcawd5 for 5% off
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~

Развлечения

Опубликовано:

27 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 92

@bugman72 7 месяцев назад

One thing to think about with regards to your rear width is doing what the 1:10 scale comp crawlers do. Maintain a wide width for the front axle so you can have that extra reach for grabbing ledges, but keep the back narrow so that it's easier to navigate through a gate. Sometimes when you're working through a gate, a narrow track in the rear would help you to push through a gate clean. Would be cool if Mofo eventually offered single complete axles. I would like to have a front axle to put on my comp rig and retain the stock axle in the rear.

@2fmrc 7 месяцев назад

That’s actually how this truck has been set up for a good while. Just a bit more narrow in the rear. Works great like you explained. I rarely ever run gates so figured I’d go ahead and widen it up a bit.

@VS666 7 месяцев назад

man these little crawlers are getting exponentially better month by month. i havent done much crawling this year but its always great seeing new products on this channel because if something impresses you then its legit!

@2fmrc 7 месяцев назад

Yes they are! Crazy how far they’ve came in just a couple years. Really appreciate ya watching and keeping up!

@Thepreppersbunkeroutdoors 6 месяцев назад

You are the only person who could make me consider such an expensive set of axles. They look AWESOME!

@MrsRabbit8 20 дней назад

Yeah, these are gonna be perfect! My build is going to be 1/18, so the need for some wideners won't be a problem. I haven't looked at what Mofo has avaliable, but if he doesn't have 1/18 axles then these will do great with wideners for sure. I hope the link helps you out, I'll be buying these soon.

@patrickgeorge4306 7 месяцев назад

Awesome video. Love the clocked design giving more caster, and that steering angle is just unreal. Even just rolling the front axles back on my SCX and FCX to gain caster makes a huge difference, but these X15's are like next level!

@electronsmove Месяц назад

castor is the term you are looking for. Some axles have the outer carrier mounted on the axles with splines so the caster angle can be adjusted by rotating the carrier with respect to the axle housing.

@BigBeck82 7 месяцев назад

Awesome vid. Very informative, keep up the fine work my friend

@gibsonlife573 7 месяцев назад

I tell you another really good axel is the treal scx24 portals

@rc.remedy 7 месяцев назад

So solid and chunky.. MOFO comes up with the goods again!

@petejones6827 25 дней назад

the injora daimond axes are boss and now they have clockable c hubs sooo they are pretty damn good and since you can clock them where you want them thats the best thing ive seen for axles released so far

@MitchellBolognaniRC 7 месяцев назад

Oh man now I'm convinced these are the axles im using in my next scx24 build

@richardparkiii8355 7 месяцев назад

Can't wait for mine to get here!

@andrewrichey7374 7 месяцев назад

Yeah buddy, my buddy Jim Wolf He built a rig with those axles . He loves them, appreciate your sharing I’ve already seen the axles at work with Jim wolfs rig I will be getting a set

@reprieverc 7 месяцев назад

Thank you for the upload Matt I think I want to try and snag a front/ front combo as well and have a front for 2 rigs as well! As for those big ol injora wheels and tires I vote the slayer elite lol

@2fmrc 7 месяцев назад

Heck yeah! I think that’s how I would buy them from now on honestly. I’m ok with the rear axles most of the time. Just need the stronger cvds lol

@gibsonlife573 7 месяцев назад

One thing I did notice with the steering link going into his his heavy knuckles it's very precise I mean you got to have that date dead accurate straight and then it's kind of a push fit to get it in on the smaller brass knuckles I didn't really notice that as much

@kylehackney-bm8wn Месяц назад

Love your videos man i watch ever time im working on my scx24 i have a question have u compared these axles with meus axles

@MrCubflyer 7 месяцев назад

I'm sticking with my Treal axels I've never had an issue with them and they are great quality and fit all the SCX 24 aftermarket parts. The other reason is they are always available.

@MysticRiverRC 4 месяца назад

Dang it Matt! Every video I watch slaps me square in the wallet! These do look fantastic for a comp crawler etc. Thankfully not every build will actually need them. They do present an ideal use case, and also point towards other manufactures improving their products. I'd love to see the beefy internals fitted inside something like the Super8, just for the reliability.

@2fmrc 4 месяца назад

Haha! Definitely check out the Meis ISO axles. They are now my favorite just for the turning radius they have.

@MysticRiverRC 4 месяца назад

Brutal, just brutal. I do have two builds planned, the MB24 and the LGRP Ultra4. I want them to do the things the real rigs do, so not comp crawling necessarily. Maybe I'll do one set of each axles. @@2fmrc

@datboy5039 7 месяцев назад

I’m not sure if you covered it or not in the video but these should allow for aftermarket steering knuckles correct? I don’t see why not but figured I would ask seeing as you have a set in person

@fajromalapell4235 7 месяцев назад

Hello Matt, did you see the new MEUS Racing Isokinetic 3-Section CVD? I really want to know your opinion on that. They promise a 54° angle steering without jerking.

@keldonator 4 месяца назад

Have you tried the isometric Meus axles since this video? Would you still say you like these more?

@1734Glock 7 месяцев назад

What about using TRX4m wheels and tires. Seems like axles are TRX4m compatible.

@jerryhermann7233 7 месяцев назад

Get the universal axils. I got 2 set of them for my ax24. I blow axils alot with stupid stock axils. They break just past the bering coming out of the axil.

@jayjonah2762 7 месяцев назад

i'm super curious how it would work with the 4ws setup. if it turns that well with just a front steer... great video :D

@2fmrc 7 месяцев назад

Yeah it’ll be like having dig almost lol

@jamesleach4160 7 месяцев назад

I am running 4ws with these axles and they are pretty impressive. Tight turns and nice function.

@hardtailparty 3 месяца назад

I love the performance of this rig. I've seen you've also had the cheat code chassis. Im trying to decide which chassis to get. How would you compare this chassis to the cheat code?

@2fmrc 3 месяца назад

Overall I think I like the cheat code better but I prefer the longer length of this setup. The way I built my cheat code it’s very short and struggles with some uphill stuff just do to it being so short. Both are great options though

@hardtailparty 3 месяца назад

@@2fmrc thank you so much for the reply and sharing your experience. I wonder if a chat code xl would fix the short issues you felt. Were you running gladiator links on your chest code back then? I'm running gladiator links and i love the wheelbase, just trying to decide on the chassis. I'm currently running a mofo ugly af 2.0 chasiss, which works surprisingly well with the gladiator wheelbase, but im wishing i had sliders like the cheat code to mount my electronics.

@wingnutbert9685 5 месяцев назад

Hey Matt. Great vid! Couple questions I'd like you're thoughts on regarding "why" and "if possible...." ???: The upper and lower tabs, coming off the hub to hold the steering link, wheel to wheel; Any reason there are upper and lower tabs? Without having them in my hand,of course, it looks like the lower tabs could be deleted and have the link ends just sitting on the screw head, maybe with a brass or nylon washer to lessen friction. I know you said you liked the way the link mounts (no need for the "O" rings) But shaving off those lower tabs would gain clearance, I think. Conversely, couldn't the top tab be deleted to gain that wheel clearance issue you had, without having to use extension hex's? ???: Also, the small "S" arms that come out from the axle, top and bottom, and hold the hub; Is there any reason for them to be as wide apart as they are? Again, without them in my hand to look at, I'm just spit-ballin'. But couldn't they be at least half that width apart. The tube sections coming off the hub are really long and don't look necessary. Would certainly make for a better fit inside more sizes and styles of wheel. Thanks Matt!

@2fmrc 5 месяцев назад

The only issue with cutting the tabs off like that is the link is only supported on one side so when it takes a hard hit it can sometimes break the screw off that is holding the links on. I’ve had it happen to some bashers that were made that way. Doubt the crawlers would take the beating the basher took but I could definitely see it happening if hit just the wrong way.

@wingnutbert9685 5 месяцев назад

@@2fmrc Thanks Matt. Thinking with crawler brain, not basher brain! LOL! I guess maybe if designed with a heavier screw maybe. I just thought it looked a bit overkill. But, I also hadn't considered manufacturing/milling production factors. Smaller/thinner = more chance of failure during production. Vibration alone could bust parts in the milling fixture.

@pooljunki1 7 месяцев назад

ive been waiting

@AKseries1 3 месяца назад

What would you upgrade on the lc80 in the background.

@texavon6168 7 месяцев назад

Can you do a video, maybe a short, showing turning circle with 4ws? I know you don't need 4ws with the steering angle, I just have 4ws X15s and it melts my brain how it steers and thought others would be interested.

@wivlle 7 месяцев назад

Matt, my mellow my man!!! Gonna have to try a set!!! I love the way composite slides, too. I have a rad hack/ mod for metal axles, so they should slide just right😎😎😎 If you ever skateboarded, you will then know what I am talking about 🛹🛹🛹No fuss, no muss!!! It’s like 🧈🧈🧈, baby!!! ☮️✌🏾 Bobby Lee

@2fmrc 7 месяцев назад

Oh yeah! I used to skate (a bit) and ride bmx (a lot) so I get where you’re going lol

@silverbulletJKU 7 месяцев назад

Ultimate tires+ultimate axles= ultimate rig… I’m almost sold and tempted to build a 24 again because of this rig in this video 😂

@silverbulletJKU 7 месяцев назад

Also I ran only palm power thanks to you and the galaxy thanks to @bcochener

@2fmrc 7 месяцев назад

@@silverbulletJKU yeah I loved the palm power early on but they’ve slipped in quality the last couple batches I’ve picked up. The galaxy have been good so far! Hope they stay that way lol

@silverbulletJKU 7 месяцев назад

@@2fmrcI think I know what you mean. Back then when I used them I received a couple that had dead cells or issues with delta leads BUT to their defense they offered to replace the order twice over since it would’ve been a wait as they were manufactured. Either way both pack a micro lipo punch and fit unique builds.

@gibsonlife573 7 месяцев назад

I have to say that treal portals or one of the best if not the best hands down

@TheCraigwallace736 6 месяцев назад

What are the chances of you doing a comparison of these against the new meus axles with the 52 degree turning

@2fmrc 6 месяцев назад

Kinda slim honestly. I think those look really good. They don’t have the ability to be clocked the way these are and I don’t think I’m gonna pick up anymore scx axles. There’s something new in the works that is going to change what I run in the 1/24 & 1/18s completely I think 😉

@Thepreppersbunkeroutdoors 6 месяцев назад

If I could and I were to design a front axle I would want to try to make the c hub and the steering linkage have enough clearance to run REALLY narrow offset tires if the customer wanted (meaning wheels that make the track width as narrow as possible, I probably used the wrong terminology) Everyone's experiences vary but I feel like when I use wheels that use a lot of offset and stick out far like deep dishes it makes me get caught up all the time on c hubs which frustrates me.

@TYLERLOVESBMX1 Месяц назад

so could i just throw these on an fcx24 without issues since it has the bigger ballends?

@sofghost6663 6 месяцев назад

Het Matt so you like these or think these are better than the super 8's?

@2fmrc 6 месяцев назад

They are definitely stronger than the super 8s. Plus I like how they are clocked already. I like the super 8s but I would choose these every time now.

@dukesrc3163 7 месяцев назад

Yup my wallet is gunna hurt 😂😂 thanks again for the awesome videos

@TheCraigwallace736 7 месяцев назад

What carbon chassis is that 18:18

@gibsonlife573 7 месяцев назад

I say it all the time this is where I learned my behavior I blame Matt just teasing I'm going to push it to the fullest while ago I pushed it so hard that I pulled the tire completely out of the bead I want to know what's the best right and if I'm snapping CVD all the time I don't want them

@gibsonlife573 7 месяцев назад

I run all mofo Hardware on a lot of my rigs right doing a crime while ago and I had the tire and sick to find with these axles that I literally tore the tires loose from the beadlock😊 of the mobo Rim I have never done that

@Steve_J81 7 месяцев назад

The Knuckles, bearings and cvd look identical to the ones one the 4m, makes me wonder if Nick did a mashup of the two to create the X15.

@2fmrc 7 месяцев назад

Yeah that’s kinda what I thought as soon as I seen him showing them a bit. Look a lot like the 4m axles for sure!

@Steve_J81 7 месяцев назад

@@2fmrc Makes me wonder if 4m knuckles would work.

@2fmrc 7 месяцев назад

@@Steve_J81 I’ll definitely try some and let ya know. I’ve been wondering myself so I had planned to try them lol

@Steve_J81 7 месяцев назад

@@2fmrc As much as I dislike worm gears I think it would be funny to put the X15 on a 4m 🤣

@davemenefee6478 7 месяцев назад

so you think the x15 axels r worth paying the money for cuz i trust your opinion and try to always buy what u say is good or grate.

@2fmrc 7 месяцев назад

I mean it’s a lot of money but I think so. I purchased these myself & I’m happy with them for sure. It’s hard to use something that cost that much on 10-15 trucks so I probably won’t use them as much as I’d like but if I’m going all out for a build I think they are worth it. Especially compared to most scx24 axles that constantly snap cvds on me. I definitely think these are the buy once cry once of axles lol. I don’t see much breaking with these things!

@jhawk1985 7 месяцев назад

What motor mount are you using with the cedar motor ?

@2fmrc 7 месяцев назад

I think on this truck it’s just the one that comes with it for the scx24 bolted to an old Furitek transmission case.

@jeffmackovitch9987 7 месяцев назад

So you’re saying you like them? Doesn’t mofo offer wheel hex widener?

@2fmrc 7 месяцев назад

Yeah I kinda put that in text in the vid. Forgot to mention. I just happened to have the Trx4m ones so I thought I’d show those.

@Stealthfoams 7 месяцев назад

What was that green scx24 u showed?

@2fmrc 7 месяцев назад

That’s my dementor ss build

@mylifted4x4 7 месяцев назад

What happened to FullSend RC?? They just kinda disappeared 😢

@2fmrc 7 месяцев назад

Not sure if he’s still making anything or not honestly

@gibsonlife573 7 месяцев назад

Told you

@jamesrcgarage6733 7 месяцев назад

🤘🤘🤘

@hbrc3867 7 месяцев назад

Id love them standard width and... $139! Damn ! Lol I think i need to move to 10th scale so i can save some money 😂

@2fmrc 7 месяцев назад

No doubt! Crazy the prices we are reaching with these little things.

@bdog7262 5 месяцев назад

What is your best performer???

@2fmrc 5 месяцев назад

Slayer no doubt

@bdog7262 5 месяцев назад

@@2fmrc really?!?! Wow. I’m totally new to this, but I am a bit surprised by that with that. That is the one that is totally all printed parts correct?

@2fmrc 5 месяцев назад

@@bdog7262 yeah it’s just the design of the skid and links etc. It just all works so well. The dementor would probably be next in line.

@bdog7262 5 месяцев назад

Bro, you need to reach out to Josh. I went on Etsy to potentially buy one of these and I can’t even find it. Yeah it shows parts, and other different kits? I think. Nothing like what’s in the video. I don’t know if one is supposed to buy parts to make something, or what. Do you have any info on how to buy one? Appreciate any help Brien

@rcjoe406 7 месяцев назад

That looks to be about 49 degrees 😳 ... 🤔

@gibsonlife573 7 месяцев назад

The amount of grease that he sends with them is enough to last you for a year on all your ride

@2fmrc 7 месяцев назад

Yeah that sample is plenty for most people a long time! I started with 2-3 of those samples and now I’m hooked on their products lol. I have the huge tubes of it now.

@Nitrooxiderc 7 месяцев назад

great but not. why go +15. so now you are forced to use mofo cvd. great for mofo but bad for custom builds. looks like 45deg steering? kinda bad now days :/

@snorrevonflake 7 месяцев назад

You are always forced to use their parts whatever you decide for. Injora +4, LGRP, already have some of those and some spare parts, axles, but yes i hesitate to buy the mofos and have to build up another stock of spare parts. They wrote me axles/CVDs are same as TRX4M though. Dont even have them in the shop as spare parts.

@lgrc6120 7 месяцев назад

But you hate worm gears😅😂🤣

@2fmrc 7 месяцев назад

I really do! There’s a reason NO good 1/10 crawler runs them. But it’s the best we have for the 1/24s 🤷🏻‍♂️ and because axial makes them everyone and their brother makes upgrades for them. I’ve been running fcx axles for over a yr & a half now basically and still can’t get anyone to make good overdrive or underdrive for them!

@lgrc6120 7 месяцев назад

@@2fmrc doesn't injora make over and under drive diff. gear's for them I'm sure have a look I'm going to now

@lgrc6120 7 месяцев назад

@@2fmrc damn it's Traxxas 4m but without portal's they may take the lead? Thanks for replying and your videos