Mondeo Mk3 ST220 Twinz Motorsport Silicone Rocker Hoses 

What I did is recycle old ignition cable ends, (the ones that plug into the coil pack). You just need to cut out a bit off the end, and fits perfectly!

Just as a note, these two pipes provide (fresh air in) to the top of both cam covers. (Its Part of the Crank Ventitalation air flow circuit). The Positive Crank Presure (that gets past your piston rings when you rev up your engine) builds up in you engine. It exits the engine through the oil seperator and PCV (positive crank ventilation) valve, then through a pipe into the manifold and burnt in the engine. "So where is the oil seperator and PCV valve?" its under the fluel injector ally manifold, on the top of the engine block, right between the V cylinder blocks ( opposite end to top engine support). The oil seperator is the black rectangular box. The PCV valve is screwed into the oil seperator, its a bit hard to see, but once you have removed the pipe from the oil seperator you will see the PCV valve. ( NOTE to self, as my V6 has oil leaks) IF the PCV valve jamms closed the Positive crank presure still want to fight to get out of the engine, it pushes down on the oil and will force oil out of the weakest oil seal. When you have changed that oil seal, it will force oil out the next weakest oil seal. SO if you have problems with oil leaks dont ignore the PCV valve! ( you may have just changed the cam cover gasgets, only to find the oil leak has moved to another place). Also if any of the rubber pipes AFTER the MASS air flow meter get a hole or split in them, Then the engine draws air IN through those splits/holes. The ECU thinks very little air is flowing because the MASS air flow senser is saying "not much air going through":- result engine will probablly not tick over and will probablly stall, you may have to give it loads of revs just to run, really roughly. So if your having this problem check your rubber pipes for holes or splits. Keep up the good work, Chazz, I watch all you videos.

Iv been looking for replacements for my 2.5 v6 as mines rotted away.. glad there's still companies who make these silicon pipes for Mondeo's as they've kinda been forgotten about now, good vid btw timing couldn't of been better lol 👍

Fantastic quality itema nice to see you with a big grin on your face bro you have earned it big time so happy for you

The rear one on my car broke, just fixed it a fel days ago. Tried to remove the inlet manifold and used your sparkplug video. However, it was way to anoying so i just did it the way you just did. Took 30 min or so. A bit tight, but doabel.

good timing m8, mine have actually split in half at the rocker cover. I will be ordering a set, hopefully they only have the right ones in stock now!

Any video about Cruise control system .Thank you.How to change cruise control system etc...

the blue air intake silicone hose looks lost in the engine bay along with the purple theme

hoses parameters?

Hello friend, my name is Cesar, I need more information about the pieces. Do you have a part or kit code? Thank you very much in advance, greetings from Argentina.

Come-on Chazz it didn't take long for the shirt to come out.

How can I get in touch with You about the folding mirrors they have sold out on eBay..hope you can help

Hello, is it possible to send me the dimensions of the same hoses if you already have them? I currently live abroad and I have a cheap option to manufacture the hoses here, and would love to bring them back for my car also. I would be grateful. Thanks :)

Your so made up with the purple and the freebies 😂