Monopole Erection | Tension

Подписаться 13 тыс.

Просмотров 541 тыс.

50% 1

SECTION OF MONOPOLE
• Top Segment
• Middle Segment 1
• Middle Segment 2
• Bottom Segment
• Cross arm
With the increase in height of Monopole the Number of Segment may increase
ASSEMBLY OF MONOPOLE
• The Monopole cross arms are assembled to the monopole body with bolts and Nuts and the the Bolts are torqued to its limit and kept ready for Erection
ERECTION OF MONOPOLE
Certain pre-requisite before starting the Erection
• Leveling of Anchor template with tubular spirit level
• Marking of Overlapping area so that during erection the overlapping portion are visible from ground
The erection of monopole is very simple. The crane is positioned properly to lift the section. Once the Levelling of Anchor template is completed it is removed such that all the nuts below anchor template are at same level.
The process for erection of complete monopole is subdivided in the following four steps-
• Monopole bottom section is erected directly on the foundation anchor Bolts.
• Monopole Middle section-I is inserted to the erected bottom as per the Fabrication drawing.
• Monopole Middle section-II with cross arm is inserted to the erected Middle section-I.
• At last the Upper section of the Monopole with cross arm is erected above the Middle Section-II.
Situation may arise when one section does not completely overlap with other section. Under such condition, mechanical load needs to exerted
Lubricant is also advised to apply on the inner portion of Monopole section to acquire require overlapping
More on:
Foundation- • Transmission Lines | F...
Erection- • Transmission Lines | T...
Under Ground Cable- • UNDERGROUND CABLE | La...
OPGW- • UNDERGROUND CABLE | La...
Pile Load Test- • Pile Load Test
Scaffolding- • Scaffolding
Erection- • Transmission Lines I T...
Stringing- • Transmission Lines | S...
Conductor Sagging- • Transmission Lines | C...
Tower Testing- • Transmission Lines | T...
GIS Termination- • UNDERGROUND CABLE | GI...
Shotcrete- • Shotcrete | Gunite | S...
Monopole Erection (Suspension)- • Video
Monopole Erection (Tension)- • Monopole Erection | Te...
Subscribe:
/ pritamsingharoy
Enjoy Watching!

Наука

Опубликовано:

20 ноя 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 63

@satyajitganguly3135 9 месяцев назад

The crane operator's ultimate skill is the key factor in installation 👌👌👌👌👌👌

@davidmonro3270 9 месяцев назад

The design and manufacturing process is incredible. It saves all those man hours of dangerous work. I always thought Americans are the greatest until it came to building a modern steam powered unit for vehicles. Ted Pritchard did it standing on his head.

@geraldblackburn4883 9 месяцев назад

this has tremendous forces, note the double bolt base design, incredible, must be doing dead end forces or change of direction duty ?

@lakshmanarao1532 6 месяцев назад

Excellent and skilled, accurate methods a.wonderfull mains of employees.

@oihiksukh6516 3 года назад

Really informative

@aliariftawfq5354 10 месяцев назад

Nice work and a litel bit dangerous how ever I love design the tower structural

@deaner00 2 месяца назад

Hello - Great video. Subscribed. Can I ask, what size of anchoring threaded rods, and nuts did you use? What calculations did you use to decide on this size?

@kerjakeras65 9 месяцев назад

Dunia pasti tercengang bila menonton video ini...ini benar-benar sangat luar biasa...👍🇮🇩

@farooqueali2197 2 года назад

Very good and knowledgeable information about monopole tower erection. I request you to kindly also share video about electrical equipment installation and cable erection works for the monopole towers. I also want to learn about erection duration along with required Man Powers along with required Machinery. Thank you for very importance video.

@josepedromendes5797 5 месяцев назад

Porque não tem pelo menos duas guias nesta base?

@alexsozansky 2 года назад

Incredible

@sureshadepu7103 3 года назад

Superb

@raiderjaymotovlog9278 2 года назад

NICE SIR!

@imbazohan1385 2 года назад

this monopole looks strong, im tower climber, my current tower so crazy shaking from light wind or when somebody move a bit, so scary.

@banadigan7511 3 месяца назад

ವಿದ್ಯುತ್ ಕ್ಷೇತ್ರದಲ್ಲಿ ಕೆಲಸ ಮಾಡುವವರಿಗೆ ಉಪಯುಕ್ತ ಮಾಹಿತಿ. ಕೃತಜ್ಞತೆಗಳು.

@HM-hi8fh 2 месяца назад

Allowable deflection?

@DesignConsultingServices 3 года назад

Great job.

@PritamSingharoy 3 года назад

Thanks!

@shank2644 3 года назад

Thank you . I work in 500kv. Can u do videos on formulas of calculating stub top. Half diagonal slope and levels n angles. Thanks

@PritamSingharoy 3 года назад

Yes I will

@jonathanlanglois2742 5 месяцев назад

The monopoles that we've got only have 2 segments plus cross arms. How many segments they have really depends on how big of a crane you have.

@PritamSingharoy 4 месяца назад

The lifting capacity of crane determines the number of segment. However lesser the number of segment, more strength the monopole have...

@pjford1118 9 месяцев назад

It would suck so badly to get the base section off by a couple bolts!

@faithfultheology 4 месяца назад

They have templates

@prafulkabadi8290 3 года назад

This is nice!!

@PritamSingharoy 3 года назад

Thanks for your support. Please subscribe to my channel for more videos

@jefferykeeper9034 9 месяцев назад

One big problem with jobs like this is that more than one person wants to Guide mccane operator

@IamVince1aa 9 месяцев назад

Yep I hate that and even more so when I can clearly see what needs to happen

@sunsetpark_fpv 9 месяцев назад

@@IamVince1aa So then why bother looking at everyone trying to guide you then?

@user-bu2mn8do6v 8 месяцев назад

to bad they skipped the part where they set the base upright.

@chennareddyindla2349 2 года назад

Where this Monopole is used. Is it for transmission lines?

@ajaykathole980 Год назад

Where the place is not available for simple template or tower there it is use

@Therealestrunnerluda Год назад

Ate the splices welded or just left like a lap joint

@PritamSingharoy Год назад

Arc Fusion welding is done at the splices

@sunsetpark_fpv 9 месяцев назад

MONOPOLE ERECTION! My bad, it's not what I though it was about 🤣🤣

@sferg9582 8 месяцев назад

Sorry, but a spirit level across the buttress plates is considered plumb? wow... there's got to be more than that.

@TobyCostaRica Год назад

Interesting group of people in the comments 😂 I’m here because I was at a nursery and walked right up next to something like this with 2 long poles to make an A shape. Wondered how thick it was, from another plate welded looked like 1/4” thick steel. Also wondered how deep it must have been set into the ground as there were no exposed bolts. It was a few hundred feet tall.