Moped Ignition System Upgrade! (IT CHANGES EVERYTHING)

Подписаться 92 тыс.

Просмотров 71 тыс.

50% 1

Having trouble getting your moped to make spark? Well so was I, and being as desperate to ride it as I was I decided to install a completely new CDI ignition system! On top of making very strong spark and powering bright LED lights, the Power Dynamo CDI that I installed completely changed the throttle response of the bike. It is so much smoother and responsive than it was with the stock ignition. If you want a nice upgrade for your moped, here is a great one!!!
Hope you enjoy the video!!! If you did feel free to Like, Comment, and SUBSCRIBE!! I'm working hard on perfecting my videos and posting more often so Subscribe to see more!!! Thank you all for the support I love you!!! #JWAY
Here is the ignition I used:
www.treatland....
Follow me on instagram: @twostrokej
Music in this video:
Cal Scruby - Underground

Авто/Мото

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 337

@TwoStrokeJ 2 года назад

Toss the video a LIKE if enjoyed it! I don't like asking but it helps me out a lot! LOVE YALL

@rasmusulrich6352 2 года назад

that moped is like 4000 dollar if its original in Denmark my Country :)

@jimmadonna1436 2 года назад

I give ALL your vids a like before I watch them.

@TwoStrokeJ 2 года назад

@@jimmadonna1436 thats love bro!

@TwoStrokeJ 2 года назад

@@rasmusulrich6352 the prices on them are going up in the US too!

@pints6363 2 года назад

Love the content bro, keep the bangers rolling

@naturechanel209 2 года назад

Stiffer springs in your clutch tune it to your kit and they also make pull starters for that new flywheel so you can run a kicksarter and a pull starter

@TwoStrokeJ 2 года назад

yea I kind of want to adjust the clutch a bit

@joshe2420 2 года назад

@@TwoStrokeJ if I were you, id get one of those aramid 3 shoe clutches, they seem to be endgame for the puch, or just lighten the stock 2 shoe, brace it and slap some dos springs

@danielsteward5090 2 года назад

I modify my clutches. I cut crosshatch on the shoes for better lubrication and tighten the screws about 2,. 2 1/2 turns to raise the stall speed to about 3,000-3,200 rpm. Get the motor into the power band before the clutch grabs.

@joshe2420 2 года назад

@@danielsteward5090 cross hatch on the shoes?

@backyardprojects8153 2 года назад

TSJ you should upload more dude.. After watching your wheelie vids I bought my first dirtbike an I been saving so I can get a crank & rebuild the engine.. Yamaha OEM ant cheap lol

@TwoStrokeJ 2 года назад

I definitely need to upload more man! Working full time and doing RU-vid is tough but I know I can improve

@brandondoorn900 2 года назад

Lol out of the big 4, yamahas got the cheapest oem parts

@migin 2 года назад

Super video, I'm glad that the ignition from my home country is being assembled in the United States, I use it myself on my moped and I'm extremely satisfied

@zdenekberan7002 2 года назад

In my experience, the most common cause of problems in these ignitions is the contact points. If they lose contact, it manifests pretty much the same as you described. Just cleaning them up with some sandpaper would've probably fixed the issue. But since you can use the benefits of a lighter rotor, I can see why you've gone for the new ignition.

@TwoStrokeJ 2 года назад

trust me, many people told me that and thats the first thing I checked. They were working properly, wish it woulda been that easy

@zdenekberan7002 2 года назад

@@TwoStrokeJ Oh, I thought it was weird you wouldn't check those first. In that case, I have no idea what could have been the issue but I guess that doesn't matter anymore. If I can suggest something, try using stiffer springs (at least the blue ones) in the clutch or just tightening the current ones as some other people have mentioned. This way the clutch will grab at higher revs where the engine has more power and this will improve acceleration. Just be careful not to overtighten them, the springs need some space to work. Other than that, your bike is pretty solid!

@zmblion Год назад

Tail light bulb.. that will cause a no go for spark on stock wiring

@jamesmiller1596 Год назад

Thank you for the interesting video. If there is no spark, first clean the points with some sandpaper and degrease with acetone. If that doesn't work, test the condenser which is usually the culprit. Rather than going to the trouble and expense of installing a rocker switch to replace the kill switch, you could have simply shorted the wires and tested that way. CDIs really make life simple. Just installed one on a 1966 Honda C65 Super Cub and what a difference.

@TwoStrokeJ Год назад

Yea man, I’m not the best with electrical stuff so trouble shooting it is pretty hard for me. CDI’s definitely make it way easier

@DevonFerguson. 2 года назад

I love the moped, the upgrades have turned it into a ripper.

@TwoStrokeJ 2 года назад

it really has man! glad you enjoy it!

@danielraag1627 2 года назад

Those ignitons kits are pretty decent but maybe in the future try an inner rotor

@TwoStrokeJ 2 года назад

I thought about it but my friends had a lot of those break on them

@danielraag1627 2 года назад

@@TwoStrokeJ might depend om the merch have one on one og my bikes never had any trouble and rlly happy about the acceleration

@Jack-ct7gg 2 года назад

Sick video love to see the moped action

@TwoStrokeJ 2 года назад

thank you bro!

@zadokmotorfreight2423 Год назад

Yes 💯!!

@Baenz_20 11 месяцев назад

In switzerland everybody have an puch maxi its very poular in switzerland i have one to

@TwoStrokeJ 11 месяцев назад

That’s awesome, wish more people had them here

@nickarchibald08 2 года назад

I recently picked up a 1980 Puch Newport ii with the za50, it does run but I need to clean the gas tank, the moped was sitting in a barn for awhile, it fires and runs on starting fluid. I just need to clean the tank

@TwoStrokeJ 2 года назад

Yea the tank is a common issue! Hope you can get it all clean!

@sonnycalzone7784 2 года назад

I bought an old tomos to mess with because of you and a few other guys thing is a mess but itll be a ripper

@max-zs8qq 2 года назад

Did you tune ur carb properly by now? Also gives more power

@jetze.d 2 года назад

You should get a tomos s25 or a tomos a35 to rebuild in the winter

@TwoStrokeJ 2 года назад

I have a video building my friends a35

@janlievaart5131 2 года назад

@@TwoStrokeJ or a gilere citta

@ivanpintaric572 2 года назад

I have tomos at home, its like Jack's automatic but faster

@TwoStrokeJ 2 года назад

That’s awesome man the 2 speeds are nice

@VirtueelGamingNL 2 года назад

Probably just broke the condensator on there. Or the breaker points aren't properly adjusted. But none the less nice upgrade!

@TwoStrokeJ 2 года назад

Thanks man!

@varshkietukas 2 года назад

Do you use air filter on your carburetor?

@linorocchi9339 2 года назад

Great bike.. have to put an air filter!

@TwoStrokeJ 2 года назад

thanks man! i need all that airflow!

@swiss.simon._4359 2 года назад

Do you have a stock crankshaft or do you have an aftermarket crankshaft? If you have the stock one i would recommend you to buy a optimized one because the stock ones are gonna blow up when you ride with this much power trust me my stock one broke too with a 70cc. Btw nice Puch!

@TwoStrokeJ 2 года назад

Thanks man! Mine is stock as of right now. Eventually I will do a full motor build but it’s held up well for now!

@tomicbrat 2 года назад

😍🐐

@TwoStrokeJ 2 года назад

Yes I agree

@emppu011 2 года назад

I clicked so fast

@TwoStrokeJ 2 года назад

we OUSSIDE

@SushiTattoos 2 года назад

Any merch for sale ?

@TwoStrokeJ 2 года назад

not right now bro! But soon!

@die_backerbsekanns3412 2 года назад

TWS what gearing you have on it

@TwoStrokeJ 2 года назад

It’s stock. Not sure

@jakelawleee337 2 года назад

Congrats on your 69th video!

@joshe2420 2 года назад

Why not get rid of the pedals already and run start it every time?

@TwoStrokeJ 2 года назад

That just gets annoying it’s nice to be able to start the bike while not moving

@joshe2420 2 года назад

@@TwoStrokeJ welp, you do you, either way I hope you continue building the puch and enjoy riding it!

@antoniobednjanec4787 2 года назад

Thats not how u set the timing for timing u are spinning the stator not the rotor rotor has a key which stopps it from turning

@TwoStrokeJ 2 года назад

This one doesn’t have a key man you set it by tightening it down

@antoniobednjanec4787 2 года назад

@@TwoStrokeJ thats weird i have like the same one and it has like a little nibblet sticking out

@tuberider2077 Год назад

Good video ! lame sound tract . not thrilled about cat walking a moped .

@TwoStrokeJ Год назад

Little bit of fun never hurt anyone

@gunnerhill3605 2 года назад

j sup how've you been bruh

@TwoStrokeJ 2 года назад

Doing good my guy how about you!

@gunnerhill3605 2 года назад

@@TwoStrokeJ great i can wheelie pretty good

@jdsstegman 2 года назад

Sadly you skipped the most important part of working on things. And that is to diagnose and not just guess.

@TwoStrokeJ 2 года назад

Sounds lame

@deltaforce4921 2 года назад

you should have checked the points..

@TwoStrokeJ 2 года назад

That’s the first thing I checked, they were working perfectly I sanded them a bit too. Just didn’t film it

@deltaforce4921 2 года назад

@@TwoStrokeJ oh ok , you are really talented with the stunts. How much cc is that thing ?

@alfredhiscock5372 2 года назад

Thats not a moped anymore XD, Try it with a German Hercules Moped there are a way better for that

@TwoStrokeJ 2 года назад

its a sort of fast moped haha

@manuelbertram8785 2 года назад

Intellectually failed a contact-triggered Ignition. U muricans never had mofas on that scale I know, but when u break into smt new, do some research and consult those who have experienced. But learning by doing may also be fine I guess

@TwoStrokeJ 2 года назад

Do you mean check the points? I did that first, just didn’t record it for the video

@manuelbertram8785 2 года назад

@@TwoStrokeJ you don't only have to adjust them, from time to time they wear out and you gotta replace them.

@tomatenplayer7379 2 года назад

For me, it's always so interesting to see a Puch Maxi outside of Austria. But I am always a fan of people riding, modifying, and keeping them alive! (I own 3 of them myself Nearly stock cruiser, modified street bike and 74cc drag bike) Have a good day and keep riding.

@TwoStrokeJ 2 года назад

I will continue to keep their legacy alive! Thanks my guy!

@stefkraaijeveld 2 года назад

Here in The Netherlands there are a lot of Puch Maxi's :) A lot of Puch's in general.

@andesite911 2 года назад

In der Schweiz sieht man Maxi‘s auch oft

@strubbleler 2 года назад

Stores still sell them here in the netherlands! And lots of people use them still ^_^

@chrisi7127 2 года назад

My dad found 2 Puch Maxis and a Derbi Savannah (restorable) in a barn he bought and he sold them both for 50€. I was literally there when he sold it. Still mad.

@butch5020 2 года назад

Man, after buying a moped myself, I've fell in love with your moped content. Hope you keep posting it man there's something so fun about having limited power

@TwoStrokeJ 2 года назад

I agree bro! Slow bikes are more fun sometimes!

@guillermo3471 2 года назад

Slower bikes make you a better rider imo you get to focus on your balance techniques, without that power to correct you. 👍

@gulfcitynd 2 года назад

I have a 150cc it does the job

@pellegrnfeldt6748 2 года назад

you should upgrade your clutch to compensate for the the power. i did it to my own and it lifted like an aircraft

@TwoStrokeJ 2 года назад

hahaha I think I might have to!

@maxeb_mrt6974 2 года назад

@@TwoStrokeJ The clutch graps way too early so you got no no power at the beginning

@janezlaznik8619 2 года назад

I fucking love these moped videos. Keep that moped content on this channel! 💪

@TwoStrokeJ 2 года назад

I will bro thanks!!!

@iambiver 2 года назад

Now that the bike is perfect basically, i would recommend you getting something that keeps the frame strong. A puch maxi frame can begin to bend because of the heavy modification on the engine. There are these things called EBR frame amplifiers that you mount in between the seat and the front fork. They should most likely keep it straight. Anyways i really enjoyed the video. Looking forward to more moped videos 🔥🔥

@Българиянадвсичко-с9ж 2 года назад

If you'll do another project, get a moped sumo like A Derbi Senda or Aprilia SX50 or one with an AM6 engine. They are water cooled and can do +30HP with 100cc kits, they also have 6 speeds.

@TwoStrokeJ 2 года назад

I want to build a dt50 some day! I used to have one

@mennokuijpers6462 2 года назад

@@TwoStrokeJ Ayo i got an yamaha dt50! theyre great mopeds, i had an 88cc kit that made 26hp, autowheelies from 1st to 2nd. theyre amazing

@dimitrizakv7285 2 года назад

i’ve had a cross puch maxi but then built it into a racing beast. set up: 74cc gilardoni kit 28mm carburator Hpi ignition Homoet p6 psr exhaust HK clutch which is basically a ktm sx50 clutch Honda mt5 forks Rito racing crankshaft custom frame still used the original frame but made it stronger Custom swingarm Custom seat Custom fitted reeds in the carter with v force ktm sx 65 reeds bored out the whole engine for better fuel flow Tuned by DDL tuning and made about 25 hp i sold it because i wanted a bigger bike. i still miss that Puch fun little thing 🤙🏼

@tke7mu0u 2 года назад

The most important thing to check is if the points are opening and closing. Which is what you missed. If your interested to learn check out videos on setting points ignition on old bikes like honda cb350s etc. More than likely why you lost spark

@thunderlessemoto1209 2 года назад

As a owner of multiple mopeds, a Surron, and a Honda Elite, this video makes me very happy. Wish my little city had a fraction of the riding crews you seem to have. Mini motos for the win.

@TwoStrokeJ 2 года назад

Yes sir they are so fun!

@hondapower8462 2 года назад

Nice to see you actualy changing the condenser and stuff I told you about, Keep the moped video’s up

@TwoStrokeJ 2 года назад

for sure bro! I was taking all the advice I could haha. I'm just glad I could get it back in running shape!

@hondapower8462 2 года назад

@@TwoStrokeJ yeah love it man, my wheelies with my tomos are getting better and better too

@papak22223 2 года назад

Notification gang🔥🔥

@TwoStrokeJ 2 года назад

LETS GOOO

@hackitgarage6503 8 месяцев назад

I know its two years later but the electric runs through the bulbs as well dead bulb no spark

@Wilma5532 2 года назад

I have the same VAPE CDI in my Simson S51, for the past 4 years I never touched the whole ignition system once :)

@TwoStrokeJ 2 года назад

That’s exactly why I decided to get one. I heard they are very reliable

@Bartusbartusbartusbartusbartus 2 года назад

Here is what the condensor does. The stator charges the condensor, then the points complete the circuit from condensor to the coil. The condensor then discharges into the coil and the coil converts the voltage to a higher voltage en discharges true the spark plug thus making it spark. the cdi you replaced it with (Condensor Discharge Ignition) is basicly the same thing but without the points and uses a pickup to send a signal to the cdi to make the condensor discharge. Inside the cdi box there is a condensor. Because a cdi doesn't need the points because of the pickup that it is replaced with, there is less wear and a faster response from condensor to coil.

@TwoStrokeJ 2 года назад

Amazing explanation thank you bro!

@KelikakuCoutin 7 месяцев назад

Capacitor/Capacitive Discharge Ignition (CDI) although a condenser is another name for capacitor. It's normally just called "electronic ignition" and the original (old fashioned) ignition is called "breaker point ignition." The condenser keeps the breaker points from sparking more than necessary, it absorbs the extra spark (called "arcing" which is pronounced "ARKING"). Electronic ignition takes the place of the points and condenser.

@RammerHonda 2 года назад

We (Dutch) do mount foot rest on the pedel shaft, and push start the moped. I would not bother the Kickstart pull start stuff. The upgraded clutches would be my next step. If you used the small inner rotor ignition would probably smoke the stock clutch.

@darealkosmo 2 года назад

EBR hydro front end soon? :)

@TwoStrokeJ 2 года назад

I hope so! trying to save money though

@SlumMoto 2 года назад

My guy!! 💪💪 good vid bro! We gotta ride more before winter 🤘

@TwoStrokeJ 2 года назад

This is very true

@lolipop120_yt7 2 года назад

Btw for anyone doing this at home with no experience.... you are supposed to mark the exact position of the ingition and put on on as it was because the position of it matters a lot in there mopeds.

@TwoStrokeJ 2 года назад

I don't know enough to make these videos proper tutorials so I appreciate you clarifying for people!

@discuschannel2381 2 года назад

I knok a better solution when you’re puch is broken. Sell the puch and buy a tomos😇

@TwoStrokeJ 2 года назад

haha that's funny. I actually prefer the one speed transmission to the 2 speed that tomos has

@discuschannel2381 2 года назад

@@TwoStrokeJ thats because of the wheelies?

@grgurmandic6622 2 года назад

Nema ovaj pojma kako se platine i paljenje štelaju na Puchovima i Tomosima. You have no idea how to set that ignition on Tomos and Puch bikes. You have that small two plates which when they touch create a circle and spark. Those 2 plates have to be precisly set up, they can wore down and because of that they do not create a good spark or even dont create spark at all

@absolutelysolid8041 9 месяцев назад

To bad your a total Josh, especially while riding but decent somewhat comprehensive upgrade guides

@blucz883 2 года назад

These are Czech Vape CDIs.. They are used a lot for all Communist era Jawa and CZ bikes.. They say it never fails hope it will run for ya well..

@mattw5183 2 года назад

I don’t see why you are timing a weighted cover😂 you should be actually timing the ignition behind the flywheel😂

@yourmama2029 2 года назад

I don't think the spark was your cdi usually first you try new ignition coil if that doesn't help then u try stator if none of those doesn't work then cdi but yeh and the throttle respone is because you got new fly wheel and stator

@obnoxiouslime6922 2 года назад

In europe we tune the fk out of mopeds, we put like 110cc kits on 50cc derbi and aprilia bikes

@qqLucaqq 2 года назад

Didn't know the Puch was sold outside of central Europe. Damn

@leondevries1199 2 года назад

a condersor is basicly just a little battery. it holds the electricity created by the ignition a little while before it transfers to the rest.

@mckusipaska7964 2 года назад

You should buy a inner rotor iqnition your bike will rew a lot faster and higher works wonders

@aliciaantoniadis9100 2 года назад

Please, make the camera less snappy. Dialogue could be better.

@perryouwerkerk7251 2 года назад

eyy man you can poul of the padels and starting chain and walk start it

@zmblion Год назад

Stock wiring if the bulb goes out for the tail light its a no go..

@lolPaperclip 2 года назад

Really want a moped!

@TwoStrokeJ 2 года назад

Get one my boy

@lolPaperclip 2 года назад

@@TwoStrokeJ I will eventually.. i just live in one of the most expensive places to live in the world :P

@gulfcitynd 2 года назад

I don't condone popping a wheelie though kinda dumb

@DoktorANuBiS666 2 года назад

Now Slam a ngk Iridium sparkplug in there and ignition will never be a Problem anymore.

@TwoStrokeJ 2 года назад

Smart man! I will

@lefty2660 Год назад

Love to see those parts. You gotta get a Simson man.

@BartPaashaas 2 года назад

Awesome video man! For the killswitch testing you can just leave the black and brown wire's seperate from each other or disconnect the black ones from the coil for even easier testing. Then the killswitch has no use and the spark no restricions

@TwoStrokeJ 2 года назад

thanks for the info bro!

@jonne420_2 2 года назад

You should buy a bigger carb like atleast a 21mm I would recommend a 24-28mm pwk carb trust me it will give you a lot of power

@jonne420_2 2 года назад

And get some better reed valves if you have the stock ones i would recommed a stage6 mk2 intake or a v-force 3 intake

@AntonAabenhus 2 года назад

do you no what a yamaha fs1 or kreidler it is the best to tune

@laimsquad7763 Год назад

hey man i have a question, where did you got the speedometer and the speedometer housing from, it looks amazing and im still looking for one for my own project ;)

@TwoStrokeJ Год назад

It’s stock, the bike came with it!

@jxstin2spf84 2 года назад

I know that feeling too when you work on the moped so long And then it's just a minor thing and you just can't find the fault

@TwoStrokeJ 2 года назад

yea they can be very annoying to fix lmao

@azze3104 2 года назад

Im 15 and in sweden i am alowed to drive a 50cc moped and i really want a Puch e50 or like a piaggio ciao but i dont have the money for one…

@TwoStrokeJ 2 года назад

save up! The E50 is a great engine

@rick_bikelife_ 2 года назад

Kerel had gwn zn contactpuntjes schoon moeten maken😂😂

@a.r.d9650 2 года назад

You should get a gilera runner 180

@chlop9524 2 года назад

Had exactly the same problem with my derbi! But fixed it and it worked but now it does not work again

@TwoStrokeJ 2 года назад

Might be time for a CDI bro!

@danielsteward5090 2 года назад

You should have tried checking the contact points before you replaced all of that other shit.

@TwoStrokeJ 2 года назад

I did that first just didn’t film it

@JMB676 2 года назад

You live near Jersey?

@swissjanu3455 2 года назад

Why not a mvt or a hpi?

@TwoStrokeJ 2 года назад

my friend had 3 hpi's and they all broke on him so I got this one because I heard it lasts longer!

@swissjanu3455 2 года назад

@@TwoStrokeJ ok i also heard that the hpi is not so good, but the mvt is way better and you have a much more power in deep rpm

@giovannibortolotti9384 Год назад

I'm italian and if i Do It here, i think i'll have Police behind me every day💀

@TwoStrokeJ Год назад

yea that's what I've heard about Italy haha

@philippterhorst2880 2 года назад

If you want too get a new/another moped, try to get a Simson S51. They are hard to get, even here in germany, but worth it. With a good 60ccm kit you can get up to 60mph easy and they have 4 gears (or even 5 if you want to). There are even 110ccm kit available for it. Would love to see a Simson S51 in america...

@TwoStrokeJ 2 года назад

trust me I want one of those really bad but they don't exist in the united states. I'd probably have to get on imported.

@STP-zj7bc 2 года назад

they Aren't hard to get in germany, they are expensive but i want to say the Same that He have to try simson

@Moto_Waters 2 года назад

I thoughthe was going to say"Hey guys the next step is a rebuilt and painting it."

@TwoStrokeJ 2 года назад

I wish haha

@louisdelahaye1382 2 года назад

Do you have girila runners in the us?

@Jack-ct7gg 2 года назад

If you’re gonna upgrade the whole thing I would get a 4 bearing motor housing and then port it to the cylinder that gives you a big power upgrade🔥

@TwoStrokeJ 2 года назад

if I can ever get a spare motor to build on the side I want to do one all out for sure

@davonmulder8458 2 года назад

@@TwoStrokeJ also tune the intake on the casings, it helps alot, specially with bigger carbs

@elguran 2 года назад

What color code are you using on your puch maxi?

@TwoStrokeJ 2 года назад

Not sure man, it’s stock!

@TheMrCherne 2 года назад

absolute goblin of a moped now thats epic

@TwoStrokeJ 2 года назад

absolutely

@frankg3278 2 года назад

Ebr forks with stabiliser and 17” wheels

@TwoStrokeJ 2 года назад

Yea man! I definitely need some bigger ebr forks

@yvesweber8959 2 года назад

Tipp: make another exhaust at it

@tinsantic9288 2 года назад

Yo yo my guy, I have Tomos 15SLC and I WOULD LOVE to know where u got that timing tool for Top Dead Center

@damiano2235 2 года назад

Like se siete morti quando ha detto dell'orto

@Roberto_4273 Год назад

13:00 just missing a motorized bicycle :v

@TwoStrokeJ Год назад

haha true

@guillermo3471 2 года назад

I love the stunt ped bro, but you gotta learn to diagnose problem sc . Dont just buy parts and hope it fixes it lol. Get a multimeter and watch a video on yt. Youx have that thing running in no time. I guess your process technically upgrades your whole system, but part by part takes forever hoping it will fix the problem. Thanks for the videos bro you got mad riding skills!