Тёмный

Most DIYers Do This Simple Job Wrong 

C3 Corvette
Подписаться 14 тыс.
Просмотров 28 тыс.
50% 1

In this video, I show you how to remove a C3 Corvette steering wheel and install a different one (note: not applicable to 1976-on Corvettes with the corporate or "Vega" wheel).
I recently restored a steering wheel I bought at a swap meet for ten bucks, • Guide to STEERING WHEE...
The one I'd been using for the past several years was looking tired, so it was time to swap it.
Many C3 Corvette owners struggle with horn buttons that work erratically or simply don’t. I hope this video will show you how the upper horn contact assembly has to be installed to ensure the horn circuit will be complete, so the horn will actually honk when you press the horn button.
Also, if you decide to swap your steering wheel, this video is a step-by-step tutorial on how I did it.
Additionally, here’s a link to a 76vette blog article I wrote several years ago with lots of sharp color photos of each step along with a written explanation.
🔗 How to Repair The Upper Horn Contact Assembly:
www.76vette.com/2020/04/corve...
Thank you for watching! 🙂👍🏻
======================================
CONTENTS
00:00 After Disconnecting the Battery, Remove the Horn Button
00:06 Remove the Upper Horn Contact
00:27 Remove the Horn Contact Shims
00:36 Remove the Star Bolt
00:55 Remove the Telescoping Lever
01:00 Remove the Spacer
01:05 Remove the Six Steering Wheel Screws
01:25 Remove the Steering Wheel
01:32 Horn Contact Pin and Retainer
02:10 Locking the Telescoping Hub
02:44 Keep All the Small Components in One Safe Place
03:03 How To Install the Horn Pin and Retainer - Properly!
07:03 Installing the Upper Horn Contact Assembly
07:15 Installing the Housing Sliding Cover
08:12 Install the Star Bolt and Secure the Upper Horn Contact Assembly
08:59 Test Operation of the Telescopic Lever and Assembly
09:12 Reinstall the Horn Button and Reconnect the Battery
09:41 Test the Horn to Ensure it Works Properly
10:21 The Finished Product Looks Great
======================================
CORVETTE PRODUCTS (sponsored)
- 76 Vette Assembly Manual: amzn.to/2GBuHrd
- 68-82 Corvette Manual: amzn.to/3devEEW
- How to Restore Corvette: amzn.to/35B6L0R
- 68-82 Vette Resto Guide: amzn.to/2QvvIG
======================================
DISCLAIMER: Even though I like to wrench on Corvettes and most of my videos are of a how-to nature, I am not responsible nor liable should you decide to follow my musings on the subject.
The repairs and other work I do are for my own benefit and entertainment, and even though my videos may sound and appear to give technical how-to advice, that's not my intention.
Working on a vehicle is inherently dangerous. If you're not confident, qualified, or lack the tools to do the job correctly and safely, hire a licensed mechanic.
#corvettec3 #c3 #c3corvette

Авто/Мото

Опубликовано:

 

22 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 48   
@danorourke5184
@danorourke5184 2 года назад
Great timing, was just getting ready to take the wheel and telescopic drum off to paint the column this is very helpful. Thanks for sharing!
@76vette
@76vette 2 года назад
Thank you for watching! 😊👍🏻
@user-xr2tc6es1p
@user-xr2tc6es1p Месяц назад
You saved me again ! I put that pin in upside down ! No wonder my horn would not work ! Thankyou
@76vette
@76vette Месяц назад
Thank you for watching! 😊👍🏻
@patrickberndt1667
@patrickberndt1667 2 года назад
Excellent timing for making this vid, the 14" leather wheel to replace the huge original wheel in my 1974 C3 arrived yesterday. I swapped it during my lunch break. Cheers from Germany
@76vette
@76vette 2 года назад
Excellent. Thank you for watching! 😊👍🏻
@eclipsetravel4926
@eclipsetravel4926 Год назад
Finishing up my interior installation and down to the steering wheel. This helped a lot. Thanks for sharing!
@76vette
@76vette Год назад
Glad to hear the video was helpful. And thank you for watching! 😊👍🏻
@kristaporsanturian9503
@kristaporsanturian9503 10 месяцев назад
Thanks for the reply! Yes, later I realized that was part of the tele-tilt spring below the base plate. Thanks!
@thomasjent1431
@thomasjent1431 Год назад
Thanks for your detailed video! It's helping me figure out how to fix the horn on my 78' C3. My horn assembly was apparently modified by somebody before I got the car, and the horn didn't work. I'm bringing it back to original design. Unfortunately, some of the original parts were missing. The pin was replaced with a screw about twice as long as the original pin. The upper horn contact assembly was modified too, and the insulator gasket and whole base plate were not there. Thanks again.
@76vette
@76vette Год назад
Glad to hear my video was helpful. It’s unfortunate that so many people butchered these components to the point where they don’t work anymore. As you now know, the original components work just fine, as long as they are installed properly. Thank you for watching! 😊👍🏻
@jamesbizelli8568
@jamesbizelli8568 9 месяцев назад
Nicely detailed. Thank you sharing this knowledge
@76vette
@76vette 9 месяцев назад
Thank you for watching! 😊👍🏻
@rosaliomorales3065
@rosaliomorales3065 11 месяцев назад
Thank you for spending so good
@rustyshackleford3369
@rustyshackleford3369 8 месяцев назад
I have seen so many with that horn post upside down 😂! It’s totally a thing! Pulling my steering wheel off and column out for paint and recovering tomorrow! Couldn’t remember if I needed a puller or not on these, I didn’t think so thanks for the video
@76vette
@76vette 8 месяцев назад
Thank you for watching! 😊👍🏻
@vanishingpoint5248
@vanishingpoint5248 Год назад
Great video, thanks for your efforts, swapping mine out tomorrow, this clearly shows the steps involved and makes the job much easier. Good on ya Mate!
@76vette
@76vette Год назад
Thanks for the kind words and glad to hear you found the video helpful. Good luck with your project, and thank you for watching! 😊👍🏻
@JH-yk5se
@JH-yk5se 2 года назад
Thank you for posting this! 👍🏻
@76vette
@76vette 2 года назад
Thank you for watching! 😊👍🏻
@briansweet4977
@briansweet4977 Год назад
Thanks for this vid. I have to replace my Wheel in my '70. The old horn button would shock me when I honked the horn, lol.
@vettegreaser6590
@vettegreaser6590 7 месяцев назад
Great video, perfect tutorial
@76vette
@76vette 7 месяцев назад
Thank you for watching! 😊👍🏻
@kevinshorter5861
@kevinshorter5861 6 месяцев назад
Thanks for telling us about that too!!
@musclecarmitch908
@musclecarmitch908 2 года назад
Awesome! I hated the steering wheel in my 76, the vega design didn't bother me I liked the look, but it became sticky from the rubber breaking down.
@76vette
@76vette 2 года назад
Yes, some of these wheels outgas some of the compounds, and once that happens, they are pretty much done. Thank you for watching! 😊👍🏻
@mariano4003
@mariano4003 2 года назад
great job! thanks!
@76vette
@76vette 2 года назад
Thank you for watching! 😊👍🏻
@kristaporsanturian9503
@kristaporsanturian9503 10 месяцев назад
Thanks for the video!! Very useful!! The problem I´ve got is that I can´t find a kit that comes with the spring insulation tube.... If you know where I can find it I appreciatte it! Thanks! Kris.
@76vette
@76vette 10 месяцев назад
If you need the tube where the spring, plunger, and retainer go, that tube is part of the turn signal assembly and you would have to replace that whole piece. 😊👍🏻
@JSW199
@JSW199 8 месяцев назад
WOW. Thank You!!!
@76vette
@76vette 8 месяцев назад
Thank you for watching! 😊👍🏻
@alzg8779
@alzg8779 2 года назад
Nice...Thanks!
@76vette
@76vette 2 года назад
Thank you for watching! 😊👍🏻
@519610ab
@519610ab 11 месяцев назад
I was wondering where did you get that steering wheel with the red stitching? I have a C3 1970 I would like to put the same one on? Great video. Thanks for your time.
@76vette
@76vette 11 месяцев назад
Thank you, Robert. I bought an old steering wheel at a swap meet and restored it myself. It turned out pretty decent, if I say so myself. I also made a video of the restoration process. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kz3usfj39DM.html
@johnathanhicks3979
@johnathanhicks3979 11 месяцев назад
My C3 is missing locking guide for the pin. Do you know what that plastic piece is called? I’ve been doing research and can’t find the thing.
@76vette
@76vette 11 месяцев назад
I think you’re talking about the little locking insulator guide (at least that’s what I call it). See if this kit would help. 😊👍🏻 amzn.to/3rZu0Tq
@Creed4222
@Creed4222 Месяц назад
A 76 didnt come with that steering wheel. It came with tbe old Vega style vinyl 4 spoke one. Did you swap out your column?
@76vette
@76vette Месяц назад
Yes. I used one from a 78 years ago. www.76vette.com/2016/01/1976-corvette-steering-column-and-vega.html
@Creed4222
@Creed4222 Месяц назад
@@76vette wish I could find one for a good price that doesnt need a ton of work done to it. Id love to get rid of this sticky steering wheel.
@76vette
@76vette Месяц назад
@@Creed4222 You could also install a leather cover and keep the original steering wheel. 😊👍🏻 www.76vette.com/2016/03/installing-new-wheelskins-steering.html
@jamesmutters8741
@jamesmutters8741 Год назад
Thank you, now all I need to do is order parts.
@76vette
@76vette Год назад
You’re welcome, James. Good luck with your project, and thank you for watching! 😊👍🏻
@GJJC13
@GJJC13 Год назад
Great video. What are the shims for?
@76vette
@76vette Год назад
Thank you! The shims give clearance between the horn button and the telescoping lock lever so one, the horn does not blow when you rotate the lever, and two,they give the horn button enough travel so the upper contact can do its job and blow the horn when you press the horn button. 😊👍🏻
@GJJC13
@GJJC13 Год назад
@@76vette Thanks, one last question: do the two parts that are riveted together "sandwiching" a gasket ever touch? I guess that what makes the horn blow is the edge of the ring that touches the rest of the wheel when you press on it, and that those parts never touch. I've seen in another video that somebody believes that those two parts touch together and are what makes the horn blow.
@76vette
@76vette Год назад
They do. See ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_eeY6D14Q04.html for more specific details. 🙂👍🏻
Далее
GM Ignition Switch Repair: Step-by-Step
21:16
Просмотров 31 тыс.
I Bought a 1981 Corvette. NOW WHAT?
18:42
Просмотров 40 тыс.
The CLEANEST C3 Corvette Wiper Bay
35:34
Просмотров 12 тыс.
How to Check a C3 Corvette Before Buying It
15:06
Просмотров 40 тыс.