Motor Break In 【ミニ四駆】Tamiya Mini 4WD #10 

+ggdarana Sama-sama om. Video dan tips nya boleh di share ke temen-temen dan silahkan di post di sosmed. Makasih om sudah nonton video saya. 👍

punya tutorial bikin norio gak om? buat MA/MS gitu.. hehe

+ggdarana Wah nggak ada om. MA saya pakai hikuo atau side damper paling. 😁

weheheh.. oke deh om.. sukses channelnya om

Om harga mini break in nya berapa ya???

nahh. mantap

Thank you so much!

Glad it helped

Mantap jiwa!

yes, it's easy! Even with this simple method, you can already see the difference between the motor with break-in and motor without break-in.

+E-Deg DS sama-sama om! Semoga gak copot atau geser lagi!

Roscoe Channel kalau break in bikin dynamo apa

+can we get 1000 subscribers Untuk semua bisa.

I think it can happens to any motor, but the risk of metal brush is higher compared to carbon brush. Imo.

+choiruddin sinaga By using Giri RPM checker application

No need to stick anything when doing the break in process

+TAMIYA MINI 4WD WORLD thank you!

It depends on your goal actually. If u wanna use it directly then it's ok. But keep in mind that a motor fresh out of the package usually have unstable rpm. It tends to go up and down significantly. So u might end up with an inconsistent run. The other alternative is to use a break in Torque Tuned 2 motor. It can match Light Dash speed in a tech course.

Based on my experience, if you've used the motor then the break in result won't be as good as a brand new motor.

I tried breaking in the use stock 130 motor , it did became faster .. but I used lots of contact cleaners . I spray in n pretty much flush it. I use a different method . reply if u want to know more how .

Thanks

+john morressey i've never made a comparison between them. So i don't know exactly which is safer. But, so far there is no problem with this method. That's my opinion.

Giri rpm checker

Of course. Bought it 3 years ago. Still using it until now. Hehe.

@@roscoechannel Becoz i have 2 doubts, saw in mad tangs video some ppl commented the volts not true, so not sure about that....secondly, i currently use a slave to break in....but the gforce is direct breakin....lollll confusing stuff Btw thanks for all the great videos bro

@@roscoechannel oh yea, btw bro is thr a way to message u for a short chat and can send u pictures? Wan to ask u about my setup and see if u hv further recommendations hahaha

Yes that's correct. The voltage displayed is not the same with the voltage delivered to the motor. But, I got no problem with that. U can just use a multimeter to adjust the voltage. Thanks man!

I have a Facebook Page named Roscoe Channel. You can post there and we can discuss it there so the others can got the info too.

Bisa cari di tokopedia

+Gian Velarde Hello. Unfortunately no sir. My friend bought it from Japan. But i think you'll be able to buy it from online shop such as Hobby Link Japan or Amazon. 😊 Where are you from bro?

Oh okay. Thanks for the heads up. I badly need one of those. By the way Im from the Philippines. Im also from noobworx haha :)

+Gian Velarde aah, i see. Okay then . Thank you for watching. 😁

See you around buddy!

+Everything Goes Halo. Mmm, kalo untuk pakai power adapter saya gak pernah pakai 1x pun. Jadi gak paham penggunaannya. Saya break in cuma pernah pakai G-Force aja.

Roscoe Channel Roscoe Channel sorry maksud saya pake g-force tapi instead of pake battery saya pake power adapter. Di video kamu kan bilang power adapter nya 6volt 2amps. Bedanya apa kalo pake 6volt 1amps vs 2 amps vs 3amps. Soalnya mau lagi beli di amazon.com. Terima kasih ya

+Everything Goes itu memang output yg direkomendasikan di alat 6v 2a. Alat tsb mgkn sudah disesuaikan dengan alat ukuran segitu. Saya gak pernah coba lebih rendah atau lbh tinggi. Adaptornya saya beli menyesuaikan aja. Untuk bedanya juga saya gak paham.

Roscoe Channel Oh okay. Aku soalnya cek di package instruction cmn blg 6v doang tp ga dikasi tau recommended amperage. Thank you buat info nya ya. Keep up the good work.

Contact cleaner hanya untuk motor saja. Untuk gear cukup pakai grease tamiya.

I think u can apply this method or the high voltage method in Jet Dash.

In this video, nope

I guess you gotta buy it online.

you look for it online bro. It's not a rare device, IMO

Kalo seri dash, coba tonton video high voltage break in. Cek di playlist tutorial 👍

@@roscoechannel Kalo untuk dinamo mabuchi /smc dikasi Voltase berapa ya biar optimal?

@@roscoechannel iya om, saya udah nonton bolak balik 😁

@@roscoechannel mau nanya lagi Om, kalo dinamo seri tuned biar lebih optimal pake cara break in yang ini atau yang high voltage ya? Maap banyak nanya 😁🙏

Sesuai kebutuhan sebenarnya. Klo saya biasa high voltage.

Aman

boleh bubuhkan sedikit di area bearing.

Boleh

The name's Giri rpm checker

@@roscoechannel Many Thanks Idol

Nanti sy buat videonya

Iya om saya tnggu ya kmren udh cba breakin dinamo tuned pke cara kyk om n berhasil

@@roscoechannel di tunggu videonya

+Francis Tan I got it from a friend who went to Japan. Well, you can check it out on Hobby Link Japan or Amazon bro. The other alternative is a device called Power Station. It's quite similar to this G-force but Power Station don't have digital display.

cool thanks!

+Agung Dwi Priatna Serius ato becanda? Hahahaha. Batre max sepertinya 4.8++. Tgantung voltase batre yang dipasang Gung. Hohoho.

Metode ini 1 set aja. Sesuai video.

@@roscoechannel thank you bang. Mantap

I don't think it will give the same result like if you break it in straight from the package. But you can try it.

Di toko online

Just adjust it according to the voltage that's written on the device

Sebaiknya motor baru

I dunno. I like my method of motor break in by not putting any oil near the brush. I put oil just to lubricate the bearing

I think that's not good for the motor. Because when you breaking the motor, the motor get hot, then you give the oil (for lubrication), oil is also a cooler. Hot metals suddenly cooled by liquid (called quenching) is not good for the motor. Quenching is good for some purpose, but I don't think it's good for breaking in motor

Try to look for it on Hobbyzone or amazon

I guess you can find it on amazon or other online shop

New or old motor?

Old motor bro. You got a pm on fb messenger bro.

Just buy a new one bro. Maybe it's time to get a new motor. 👍

Hmm, gak yakin bakal bisa naik lg sih om. Tapi saya sendiri belum coba 6 menit. Break in cukup 1x saja. Berikut ya tinggal pakai.

+Chris Lee I did not test it. But yes, you are correct. The voltage delivered to the motor is higher than the voltage displayed on the device. You'll notice it by hearing the sound of the motor. But actually that what makes the motor has higher rotation than the normal condition. I've tried it by using 5,6 volt and so far by using this 3 volt that displayed on the monitor, I think is the safest method. And it produce great result also. Even some Japanese racer use 5v, 6v and even 9v to break in their motor.

bisa aja tapi biasa hasilnya kurang

With Giri RPM app

Sekali saja. Iya, permanen

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OVquoehoTFY.html here you go

Yg ditampilkan paling mudah sih gan. Kalo ga punya alat, gini aja, pasang 1 batre alkaline fujitsu di chassis. Sisi sebelahnya disambung pake kabel. Nyalain (sesuai arah jalannya mobil), taro kulkas biarin sampe batrenya habis. Paling sederhana sepengetahuan saya demikian.

Saya tidak paham seperti itu. Biasa saya break in saja, ilmu saya tidak sampai tahu jadi rpm ke atau torsi ke. 😊

@@roscoechannel ooh oke... Thanks 👍

I don't think so. The result is obvious in new motor.

+bisma a pada akhirnya memang butuh beberapa eksperimen gan. Termasuk proses belajar. Kalo ada motor rusak dengan cara a, atau karena cara b ya itu jadi pengalaman. Tapi kalau nggak dicoba, gak akan tau nanti gan dan ga akan bergerak kemana2 jadinya. Coba dulu saja gan, baru dibandingkan nantinya.

Sesuai yg tercantum di mesin g-force nya. Saya nggak ingat

+aewan u can try ebay or amazon bro. Or hobbylinkjapan

Gak pernah ngelakuin

@@roscoechannel om saya punya torque tune 2, belum di lubangi, kl jenis ini brush nya ada carbon nya apa cuman plat tembaga?

Tembaga

It's the same like how I break in HDP

im using ac adaptor 4.5v and 6v no 5v volts

Giri rpm checker

Sebaiknya buka baru langsung break in sebelum digunakan. Untuk yang sudah pernah digunakan, biasa efeknya tidak terlalu terasa karena brush nya sudah terpakai sebelumnya.

oia gan bnyak dinamo tamiya yg merek dri china, kualitasnya bgus gk gan

Nggak pernah pakai gan. Saya hanya pakai yang merk tamiya. Karena sesuai aturannya demikian.

maksudnya bnyak merek dinamo tamiya tpi made in nya china gan, itu kualitasnya ttep oke gk

Ohh, kirain merk lain. Oke aja sih gan. Saya selama ini beli gak pernah merhatiin made in mana.

Saya nggak pernah coak sih. Cuma pernah dicoak sama panitia karena diharuskan. Coak juga melanggar rules resmi.

Dibawain temen dari Jepang

Di Jordan Toys ada seinget saya deh

+sony anugrah pakai aplikasi Giri RPM checker. Bisa download di playstore bro.

+fransisco simanjuntak posisinya dimana om tinggalnya?

+Putra Rizki ngantuk. Hahahahaha

Nope. I just clean it after I finish the Break In process. Umm, as I said in the video.. There are many ways to do the break in process. There are a racer here who use 1 volt to do it. But I also saw a Japanese racer did some experiment by using 4-5-6 and 9 Volt. I can't tell you which method is the best, but I think 3 Volt is the safest to to the Break In process and it boost the performance of your motor quite a lot. That's what I think sir.

well you actually demostrated that it went from 17000 to 21000 rpm doing it like that so it must work for sure. As long as it s safe for the life of the motor then I ll give it a try myself since i have new motors and a new gforce too to be used. By the way, is there any difference between using a power adaptor and batteries if i want to do a break in like you ve shown? thanks

+Rudolf Behm I did it once with 6 volt. But your motor won't last long. And from my experience, LDP (Light Dash Pro) motor life is relatively short compared to a carbon brush motor like Hyper Dash Pro. The strange thing is... I treated my Torque Tuned 2 Pro motor and my Light Dash Pro motor with the same way. But my Torque last way longer than LDP. I dunno why.. but to use 3 volt for break in your motor is safe.. and FYI, when your LDP near the end of it's life you'll see its true potential. The speed can goes up really high. Way beyond a normal LDP.. but soon after that, the brush will snap. Me and a lots of racers here experienced the exact same thing with LDP. But still, it's one of my favourite motor to use in a tech race. Because the speed and the torque are not as wild as HDP. My concern with batteries is the energy will be drained eventually in the course of 3 minutes. I'm afraid it won't be able to deliver the exact same voltage throughout the break in process. I think the most ideal way is to use an adaptor.. Well, that's just my opinion though.

Perfect thank you very much! PS: saw the post on the Seattle facebook group when you posted the video :)

+Rudolf Behm You're welcome bro. Ahh, I see.. Well, thanks for watching and it's great to be able to share stuff with Mini 4WD racer from another country. You can share this videos to your friends or maybe to another group. I think it will make the race more competitive and more fun if everyone knows about this break in method. All right then, talk to you later!

+Budi Setiawan nitip temen dari Jepang. Coba Googling atau cari di facebook untuk alatnya. Namanya G-force Mini Break In System.

kalo alat nya udah punya mas,,adaptor nya saya ga punya, saya kalo break in pakek batrei eneloop yg 2500mah itu mas,,,

Budi Setiawan bisa aja mas. tinggal pakai sesuai voltase yang diinginkan.

Well it depends on the motor itself. Sometimes you can get bad motor out of the package bro.

My hyper dash pro only get 21K rpm :( I got very bad motor out from the package

Yes, it happens... Buying motor is like buying a lottery / gacha 😁

👍

Yup

Saya team #anticoak 😁 Gak dicoak juga kebut kok. Peraturan resmi Tamiya melaran hal tsb soalnya. Tapi di Indonesia pada melakukan sih. Maklum, banyak yang masih merasa sulit mematuhi aturan.

@@roscoechannel maaf om maklum saya masih newbie soal ny liat para racer2 lain maupun youtuber lain dikit2 kalau mau break in dinamo mini 4wd ny harus di coak dulu,ntah saya bingung,padahal kalo di coak2 begitu jadi kurang bagus dinamo nya..🙏

@@muhammadhafidh6121 Gpp om. Santai aja. Ini cuma perbedaan sudut pandang dan idealisme aja kok. Hehe. Biasanya klo coak, rajin semprot standard om. Trus suka bececeran di trek dan merugikan racer lain. Itu yang saya hindari sih om dan selalu saya ajarkan ke racer-racer baru. Makasih sudah nonton om 👍

@@roscoechannel siap om,jadi kalo engga di coak itu sama saja kn om? Oh ya itu alat break in nya beli seharga berapa tuh om..?

@@muhammadhafidh6121 menurut saya sih bisa kencang kok. Nanti bisa lihat2 video saya deh. Mobil saya semuanya pakai dinamo nggak dicoak. Alat break in harganya dulu beli 650rb. Skg nggak tau harganya brapa gan.

dua kali break in gt

Nggak perlu sih. Proses break in menurut saya cukup 1x aja.

oke kak... thanks

Coba cek di e-commerce. Kalo saya alatnya nitip temen di Jepang 3th lalu.

@@roscoechannel ok

mungkin rusak?

Around IDR 700.000-750.000

@@roscoechannel and how much is the break in kit some thing

Wow. Congrats bro. 🤣

Nani?! OP stock motor?!

Ada subtitle bahasa indonesia lho

I can get one for u or u can buy it online

i checked all the motors and all of them is working at 2.4-3.0V. do you think it's safe to do this with 3 cycles? 1. lubricate the motor 2. run motor at 2.4v/5mins 3. cooldown 5mins 4. lubricate the motor 5. swap polarity of alligator clips 6. run motor at 2.4v/5mins 6. cooldown

Never tried them before. I usually use high voltage to break in the motor to improve the performance. Or u can use a very low voltage with longer duration.

@roscoe, there is a amp consumption of the motor. Is this also important to look at?

Yes. Just keep in mind that if the consumption rate is higher, then it will drain the battery faster.

Main untuk santai aja gak perlu banyak alat kok gan

di kota saya ada STB Pro, saya kira tinggal ikut aja ternyata dinamo harus dicoak, kalo mau menang paling ga harus di break in, haha, rumit ya gan.

Betul. Kategori stb sudah bergeser cukup jauh dibandingkan beberapa tahun lalu sih dan kebetulan saya sudah tidak mengikuti perkembangannya.

Welcome new subscriber! 😁

Lol