Motorcycle Cruise Control!? [Throttle Lock Review]

Подписаться 1,2 млн

Просмотров 474 тыс.

50% 1

Enter to win one of the throttle locks seen in this video: bit.ly/ThrottleLockGiveaway
Omni-Cruise: bit.ly/1T2HkNC
GoCruise: amzn.to/1LXhmDs
When I found out I could have cruise control on my motorcycle with these throttle locks I had to give them a try!
If you ballin on a budget here are clamps: amzn.to/1LXhqmy
I found these things from Walterrific:
/ walterrific
BOAB brought to you by: / mizshift
"Always cite your sources kids"
*clicking on product links above will take you to product pages and if you buy from that link you will help support the channel with no extra cost to you!
----------------------------------------------
Check out the official C2W website!: www.chaseontwowheels.com
----------------------------------------------
LINKS:
Riding Gear -- bit.ly/Ridinggear
Camera Gear -- bit.ly/C2Wgear
Phone Mount -- amzn.to/1Rse7FK
Vlogging camera -- amzn.to/1Il98q1
Where I get all my gear from -- imp.i104546.net/KeE4ze
WBRGarage Website -- wbrgarage.com
🏍 GEAR:
bit.ly/C2Wgear
Helmet -- bit.ly/C2Wrr3
Bluetooth -- imp.i104546.net/WDER6e
Jacket -- imp.i104546.net/EaAJxP
Pants -- imp.i104546.net/x9NyyA
Gloves -- imp.i104546.net/9WjMW5
Boots -- imp.i104546.net/Gj1Gok
Glasses -- bit.ly/3nXSet9
**code: Chase gets ya 10% off!
----------------------------------------------
Subscribe for weekly videos every TUESDAY and FRIDAY!
Main Channel:
/ chaseontwowheels
Second channel:
/ c2wtwo
Facebook:
/ chaseontwowheels
Twitter:
/ c2wtweets
Instagram:
/ c2wpics
Twitch:
/ c2wgames
Merch:
bit.ly/C2Wmerch
You can send things here!
Chaseontwowheels
P.O. Box #673722
Marietta, Ga 30006
Intro Audio:
Savoy
1000 Years EP
Let You Let Me
Outro:
Shot at:
Zen Motors
zenmotorsllc.com/
Audio Track:
Stonebank
Monument EP
Lost Without You

Авто/Мото

Опубликовано:

3 мар 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 576

@ninjabasics5004 8 лет назад

Also a note to go with throttle locks. When installing and testing, DO NOT over tighten upon installation. They are meant to hold your throttle steady but must still be loose enough that if you have to chop the throttle for avoidance maneuvers or for traffic related situation that it can be easily rotated with not much effort. That is part of why the Omni has a set screw. So it can be fine tuned for fitment on any cycle. The last thing you want in a panic situation is to have to force your throttle closed, causing you to be unable to break any later then you have to.

@67ss76 2 года назад

Thanks for the tip. I was considering one of these but was concerned about the safety aspect of disengaging it.

@TypicalScrub 8 лет назад

*Tries to ride in cruise Control without hands like a boss*😎 *Hits pothole*😳

@SuperLabonte43 8 лет назад

+Bryan Wright Have you ridden a sport bike?

@kellinquinn6526 6 лет назад

Even if the bars wobble they'd straighten out real quick with no weight on the bars. Grab onto the bike with your thighs and you'll be fine.

@exothermal.sprocket 6 лет назад

The stability of a motorcycle is not: *the rider gripping the bars hard *the gyroscopic force of wheels/rotors spinning quickly The stability of all motorcycles is: *the rake and trail relationships of the front steering stem geometry

@CurmudgeonExtraordinaire 6 лет назад

Or he finds out that the aerodynamics are a bit different on the bike and without his hands on the throttle, it gets into a death wobble. I had that happen on a bike recently. I had built an auxiliary tank to go on the luggage rack for long trips. Without the tank, I could take my hands off the grips and it would continue along as expected, slowly losing speed. When I did it with the tank on the bike, the front wheel would start to wobble, progressively getting worse. Of course, I did not leave my hands off of it to see how bad it could get before the bike ended up going down. All it took was to barely touch the handlebars with a hand for it to dampen out the wobble and it was not even possible to know that it was there waiting to bite the rider if he ever took both hands off the grips again. I took the tank off since I needed to repaint it (Rustoleum oil based enamel is NOT gasoline resistant, unfortunately) and the wobble disappeared. Interesting, from an engineering aspect though... I would have thought that the windshield combined with my body and/or the backrest for the rear seat would have blocked enough of the airflow that the tank would not have affected the handling.

@alexsenrose2053 Год назад

Bro💀💀

@WALTERRIFIC 8 лет назад

I approve this video. I've had my Omni Cruise for almost two years now and it's one of my favorite accessories; I've used it with several bikes and it'll last for years to come.

@chaseontwowheels 8 лет назад

+WALTERRIFIC I think you're ready for your QVC appearance mister Walter.

@davidayers9505 8 лет назад

would you recommend this more for an experienced rider as opposed to a new rider?

@OpenThrottle5 8 лет назад

+WALTERRIFIC +chaseontwowheels bro please don't get me wrong. both of them work perfectly and does the same job. but the same job can be done by a hose clamp DIY for as cheep as a few bucks($1 OR $2). if you want i will do a tutorial video on my channel and post a video reply. BTW AWESOME REVIEW BRO.. I WISH I COULD BE AS GOOD AS YOU SOME DAY.....

@BIKEGEARMOTOVLOG 8 лет назад

+David Ayers I would say a more experience rider because in a ponick situation a inexperience rider might don't know what to do are don't feel comfortable with this on he's are her bike. my take anyways

@OpenThrottle5 8 лет назад

JAM ROCK MOTOVLOG i 100% agree with you BTW i am a motovlogger from India please checkout my channel and subscribe

@MrMicheald2000 8 лет назад

I have owned both of these units. First the GoCruise, after about a year it broke. So I bought the Omnni-Cruise and I love it. The adjustment screw lets you get it just tight enough so that it doesn't slip and let the throttle close. The GoCruise worked well but it would slip more and it broke. So, I recommend the Omni-Cruise for a long term solution.

@filthy8225 8 лет назад

That is why I like your channel Chase, you do reviews on things NO ONE would think of reviewing. Thanks again.

@GrumpyGoat 8 лет назад

I have the BrakeAway Throttle lock on one of my bikes. It costs quite a bit more that this but it is worth every penny. Not only is it slip-proof when properly adjusted but it is activated by a push of a button and can be released either by a push of a different button or by the squeezing of the front brake lever. You might want to consider a review of that product.

@gregdrive9277 8 лет назад

The production quality of this video is SUPERB! Way to go Chase!

@riggin0873 8 лет назад

Great review! I have used the "cramp buster", but that made you keep you throttle hand engaged. I will be picking one of these up for my next long trip.

@Pallyganks 8 лет назад

Hey man, just wanted to say I really appreciate all your content geared towards new riders. Taking the MSF course in a couple weeks and hoping to get my hands on an R3. Can't wait to get out there!

@ReviloRider 8 лет назад

I'd like to complement you on the production values of this review video. Well done. Very slick indeed. 10/10 -------- As for a similar product, I've used a "thumb lock" which was far simpler in operation, and has nothing to do with the brake lever.

@paolo89tien 8 лет назад

I just recently realized that you do actually give good reviews, not just motovlogging! Nice vid

@CaptainVelveeta 4 года назад

Great video...thanks for the comparison. You're right, the Omni-Cruise does look a lot sleeker. I needed something to keep my hand from falling asleep after 15 min of riding so I tried a Crampbuster Throttle Assist for $9.99 at Cycle Gear and it works great.

@muleoutpost8156 8 лет назад

+1 for the omni cruise. I bought one a year ago for my sportbike and since have purchased another bike with electronic cruise control. I keep the omni-cruise in my pack to let my friends use on longer rides. I also met the inventers of this great accessory at Phoenix Bike fest 2015. Fantastic Guys, great warranty on their product(lifetime, I believe), and they sold it to me for 20% off at the event. Ridesafe

@darrenkaspers9331 5 лет назад

I'm riding from England to Italy in September for MotoGP, told the guys I'm riding with about this thing! good to finally see it work x

@stefanc2242 8 лет назад

Cramp busters work awesome too. Not really cruise control but you can manipulate the throttle with your palm and don't have to grip the throttle as much. I was surprised how great it works on long trips. The thing about these cruise controls is where I live there's lots of hills so your either speeding way up or slowing way down.

@dtmccurdy11 8 лет назад

Not gonna lie man, your video editing and quality is top notch in your recent vids compared to earlier vids. Impressed with where you have come. Well done and keep it up!

@samwisekoi7574 8 лет назад

Adjustable throttle locks are standard on every Harley-Davidson throttle. However, they act by increasing the friction against the throttle return spring. That means that in addition to holding a fixed speed, they also let you make very low effort speed adjustments while riding. This is very nice while riding through rolling hills, for example. Also, actual cruise-control units are available. I added one to a carburated Gold Wing, mostly because holding four carbs open for hours on end was incredibly tedious. Anyhow, good video, and I would suggest people look at other types of throttle locks as well as these two. Talk to any touring rider to find out more.

@joebrewer711 8 лет назад

Jason Hung they are not dangerous at all! I have had a throttle lock on my bike for a couple years now and it awesome! Go Cruise had an aluminum version as well which is the one I have. It's looks very similar to the Omni Cruise and it is actually the original. Chase thanks for all of your videos and tell Yumi we are all wishing him well!

@fuckyourcouch23 8 лет назад

i love the production value of this video c2w, good job on the different angles and overall quality!

@rstaples93 8 лет назад

This is a seriously high-quality review! I like this format, Chase, keep it up! I might just go get myself one of these, too...

@doomstree4208 8 лет назад

I have to say I really enjoy the quality of your product reviews, so much so that I watch your reviews very interested even tho I don't own a bike.

@RevoltLarzWolfblade 8 лет назад

The way you indicate the speedometer when showing how you loose throttle was a very nice touch.

@chaseontwowheels 8 лет назад

+Revolt Wolf I'm honestly just surprised that someone noticed. Tried to make it super subtle.

@jeremyt7722 8 лет назад

+John Lawson If you install this and can't close your throttle it's wayyyy to tight. It should just be tight enough to hold your RPMS steady, but still allow easy throttle closure. It takes a bit of fine tuning with the adjuster screw.

@LightGesture 5 лет назад

I've watched the video three times trying to see what you are taking about...

@skynetd-termination98 8 лет назад

Exceptionally professional review, Chase. While I personally wouldn't use one on my bike, I thought you did a great job going over both.

@chaseontwowheels 8 лет назад

+Skynet D-TERMINATION I appreciate that man!

@adrianleeds3468 4 года назад

Thanks Chase, have just bought one for my RF900, hoping for relief from highway vibes 👌

@wildernesspath1 8 лет назад

Pretty cool. I've thought about a cruise control but the only I really saw was a $200 handle replacement. You've actually saved me money.

@free2000 8 лет назад

I've had a basic plastic one for many years, different than the one shown, and it works great for relief when your hand is getting tired or cramped. One thing to note, compared to a car cruise control which actually maintains a specific speed up and down hills, a throttle lock will not do that. Only maintains a steady speed on a flat road, you will slow down going up hill and speed up going down. If I ever need a replacement, I'd get the Omni-Cruise because of the adjustability of it so it works with any grip. I also know the inventor/maker of it and can attest to the quality and attention to detail of his work. (This is not a paid endorsement! LOL)

@goducgo 8 лет назад

The plastic one will break after time. I like the more robust lock. But like you said taking hand off bar or reaching brake can get some interference. Great for freeway use and use it a lot on Tuono and Multistrada. Would highly recommend either one.

@Moto-xe3kw 8 лет назад

Have had this for over a year now and completely satisfied with the cheap version. Mine came with a rubber sleeve like the one that came with the more expensive version. It is easy and simple and when you want to release the throttle you just twist the throttle forward and it disengages!

@garrettga1 8 лет назад

Love your videos, they've helped me out so much with maintenance on my R6. I love to ride and have been shafted by too many mechanics, whenever I have an issue with my machine I go to your page. actually had to use your screwdriver puncture method on my oil filter, worked like a charm.

@chaseontwowheels 8 лет назад

+Garrett Garvin Glad it's working for ya!

@st8kout1 8 лет назад

Well done on the review. I've been looking at a lot of different designs. There's a 'professional' model that releases when you brake, but it's crazy expensive. And don't bother with the 'cramp buster' as it's not really a throttle lock.Years ago I remember reading of Harley riders using rubber bands around the inside edge of the throttle to give it some resistance from turning. It didn't lock the throttle (that would be bad) but took some twisting pressure off your hand during long rides.

@Jay_1k_24 3 года назад

Well explained, ty Chase. You've help me make a decision on the cruise control/lock.

@airheadrider1872 8 лет назад

Great video brother, I've been looking at these for I do a lot of highway riding.

@lenlaskowski7374 8 лет назад

I got the Omni Cruise to use on mt V Strom very well made and it works great.

@alloutanthony1492 8 лет назад

cool product I do a lot of highway so this will be amazing for me. I never new how simple these "systems were"

@Squat5000 8 лет назад

The think I enjoy about using the omnicruise is that I can set it with my thumb... DOnt need to push or pull with my finger, just thumb up and it helps adjust the throttle. GREAT for highway crusing out to school...

@onthethrottle9230 8 лет назад

Good idea. Seams like something manufactures could build into the standard bike, without the extreme cost ACTUAL cruise control systems. Or something grip manufactures can build into their aftermarket grips. Nice video Chase.

@mikes3523 8 лет назад

I have the aluminum Go Cruise and its not bad. I only use it for long rides but even then I sometimes find it annoying coming to stop signs or red lights. On an interstate or freeway though it's great.

@TheMickvee 11 месяцев назад

I have had a Go Cruise for 20 odd years. It fits every bike I have had in that time, and it works just fine! Best £20 I ever spent!

@worawatli8952 7 лет назад

It works really amazing on CVT scooters, you can engage it and leave it there whole trip on the highway, because you have no shifting, you can directly use it to change speed then put it back to cruise speed, not having to reset it all the way changing gear like on geared bikes.

@luc1ferblack 8 лет назад

thanks for this. i was going to buy a brakeaway however i have heated grips which it says you cant use them with but doesnt say why so people fit them anyway but if the brakeaway heats up too much it jams your throttle.i was looking at the plastic thing but the lack of adjustment is a no no plus i prefer the omni thumb lever

@Minerva___ 7 лет назад

Fantastic video. Thanks for all the detailed info and the shots of how it works.

@fredminpin 5 лет назад

I've been thinking about this off and on for a long time. Just didn't want to waste the money for something that probably didn't even work, or the other extreme would be getting stuck with the throttle open. I'd like to try one out, it appears that it would be easy enough to use once you got used to it.

@Nicoya 8 лет назад

I really like the Kaoko I got for my BMW. It fits in place of the bar end and looks really slick, super easy to operate too. You could do a review of a few bar end throttle locks to follow up on this vid, I think folks would be interested in seeing how they compare.

@tuninforks5174 8 лет назад

Have you tried those cramp buster wrist rests? They are pretty good because you just rest your wrist on it instead of gripping the throttle. It helps a lot on long interstate trips.

@Nukum88 8 лет назад

I just picked one up been waiting for this video to come out been looking for something like this so when I come down from st.louis to the meet up in May I can relax some keep up the good work mane

@INNOVVDashCam 6 лет назад

It must be a good choice for long trip riding, thanks for recommendation!

@MrSmith-yy3uc 8 лет назад

great video, I've been thinking of buying either one of those and this definitely helps! keep the good reviews coming man!

@r4b1dsh4rk7 8 лет назад

Nice review! Might have to snag me one of these when it gets nice out again.

@77TickTockTime 8 лет назад

I backed the Atlas Throttle Lock on Kickstarter a while back... will have to put together a quick review on it because the mechanism is a bit different. Personally I think it's far superior to the Omni Cruise because of the simple push button actuation. Great review and hope to see more on the commentary front.

@olli_k 8 лет назад

If you have a little more in the wallet and want to get something that looks a lot better, check out the Throttlemeister throttle locks / bar ends. I have them on my bike and I LOVE THEM! You twist it with the throttle and then a little more and the throttle stays open. If you have to slow down, just give a little bit of pressure on the roll off and the throttle closes. You can get different weight bar ends to reduce or eliminate vibration in your handle bars. And they have a bunch of different designs. I am not sure if they are a fit for every make and model of motorcycle out there. But if they fit your bike and you have the funds, check them out!

@proudamerican7001 3 года назад

Thanks for the video. I’ll be getting that for practicing low speed and u turns on my Harley road glide.

@scooter1577 8 лет назад

awesome review!! i would never use this but your review was flawless.. lets do more like this..keep up the good work

@burnsjames08 8 лет назад

Very nice review. I've been looking at getting the Omni-Cruise for a while now. Were there any negatives you noticed on that one that were not in you video?

@InvictvsNox 8 лет назад

Great reviews. I wonder how well these work for cruisers.

@christianmirabal5389 6 лет назад

Looking at getting one for an upcoming trip. Hope does it disengage? Meaning what about when you have to stop or slow down.

@ralphkolish3973 7 лет назад

I own a 2009 harley ultra classic due to recent failed surgery i have lost some use of my left hand is there a product out there to make it easier to pull the clutch back? I have looked into rekluse auto clutch , and i dont want to loose my left nut for the cost. If you heard of anything i would like to here it sure dont want to stop riding. Thhanks Ralph

@andrewmoss7044 8 лет назад

Hey C2W.. I just Googled monster fairings and your R6 is everywhere on that site. Looks like your the new spokesman for monster fairings. Congrats ..

@gix40 8 лет назад

I have used the throttle cruise for about a year now works perfectly on my 2012 CBR1000rr. I have moved on to a Ducati Multistrata now still works perfectly. Cheap and easy.

@philpreston8658 7 лет назад

I've had a go cruise, (the cheap plastic one) on my bike for 7 years. Works great...cost me 20 bucks. Yes the speed will reduce after a while, but unless you have a proper vacuum cruise control set up, any of the throttle locks will. I mainly use mine to momentarily give my right hand a stretch and fist my fingers a few times.

@philpreston8658 7 лет назад

Oh, and I would never cruise down the highway, laid back with no hands on the bars...that's just moronic...

@5ohhlobo 2 года назад

Is there a lock that stop the throttle from opening more? I want to teach my girl to ride motorcycles but I'm afraid she will over throttle and reck just from taking off.

@brandonleonberger 8 лет назад

My 1981 Honda's have throttle locks that stay mounted against the inner end of the grip. I have two styles on nearly identical Cb900c.s.I know one has been on the bike since 1981.

@brostarfleet 4 года назад

Would this work on the can am ryker? There is no break on the handle bars.

@mxrriderr 8 лет назад

In terms of safety though... can you push the throttle forward with the clamp on and engaged in case you have to brake or something?

@zoltan-8233 Год назад

Is it not dangerus if you want to brake emmadiately? for example in lock stand than actually it lock your brake too or it can put more up your throtle as i imagine it so

@Burner-Adventure-Chronicles 8 лет назад

Nice! Been kind of wondering how they work. I usually have to spend about 50 miles each way on the highway to get to my ride groups....this would be......handy... What kind of grips are those? You like them over stock? My OEM are starting to wear a little...

@TheMidwayMonster 8 лет назад

Nice review! Picked up the omni-cruise over winter and looking forward to trying it out on long trips :-)

@keithd87 6 лет назад

Just a curiousity. In an emergency, if I need to close the throttle and break, will it hinder the "process"?

@SammyOnAYammi 8 лет назад

Nice review buddy! I have to check them out. I plan on doing a long trip soon

@vestmanmedia6987 2 года назад

Great video, thanks! I noticed you have a gopro with a charger on the side?

@nancyf6613 2 года назад

Does it release with the thumb notch noted? Can it be released by using the throttle?

@Mrjulicaro 8 лет назад

Good timing on the review, taking my Fz8 on a 10K trip this summer and this seems really useful! Thanks for the review chase.

@chaseontwowheels 8 лет назад

+Mrjulicaro Trust me if your about to do a trip like that then this thing is a MUST

@Mrjulicaro 8 лет назад

Yeah, Ive been slowly putting touring gear on my Fz8, actually headed out to daytona bike week tomorrow. Thanks for all the videos chase, always easy to watch.

@LightGesture 5 лет назад

If you roll the throttle forward, can you dissengage the throttle? Or do you need to accelerate to loosen the wedge?

@almulakimaalimalriadiat9068 6 лет назад

so what would you do in case you have to slow down in a hurry ? because your throttle is locked ? do you start unscrewing ??

@2chainchristian673 8 лет назад

great video. I've been thinking about those. Glad I seen it. I just got a cbr500r in November 15 n put 5000 miles on it already. cruise would be nice

@badass1g 4 года назад

Omg I’m getting one ASAP. My hand keeps going numb on long rides this will be amazing

@robertpinder2307 3 года назад

Nice video but you didn't show the "release" motion. Obviously it just works by friction or is there some magic involved?

@ourcollectiveinsanity 2 года назад

but if you have to grab, the front brake on an emergency wouldnt the front brake lever push the throttle control back causing the bike to accelerate?

@mileslrd7881 3 года назад

Awesome tech for cruise control , where do we can get those things

@NathanM007 2 года назад

Omg, my bike had one of these on the handle bars when I bought it, the previous owner never mentioned what it was nor did I notice it until I brought it home, I just threw mine in the tool box and completely forgot about it till this video came up on my recommended lol

@patrickspapens5497 Год назад

I 3d print my own, i also have a different kind, with two flat discs (that interlock) that sit between the handle and throttle cable housing. One has a handle that sits between the two cables on the hanndle so it stays in place, the other one has a tab that you can push down, making one disc slide over the other, making the assembly thicker and putting the throttle grip in place. to disengage, just push the tab the other way into it's original position. This version will keep the throttle grip free. Both work well, but you always have to remember to disengage them, compared to built in cruise contol systems. The one that looks like the Omni-Cruise has a tensioning screw, with a ring that has notches that lock into a diamond shaped part on the main part so it stays in place and under the same tension. Two M6 nuts and a bit of thread is used to hold it all together. Printin time is about 2 hours and costs are 80 cents, plus two nuts and 5cm of thread.

@sixthisoverdrive 8 лет назад

Go cruise has a premium metal one as well. Love these for bike trips. Turns a sport bike into a tourer.

@tomfoodery4745 8 лет назад

+sixthisoverdrive +chaseontwowheels the go cruise throttle lock is without at doubt the best budget throttle lock out there they go for like 30 to 35 bucks on amazon.

@shannonmcc461 8 лет назад

I have the cheap one and it works fine, very easy to use with one hand & worth the few dollars.

@motoninja2747 8 лет назад

cheers chase i regally ride 4hr oneway highway rides here in Australia and don't have any assists this would be a great aid cheers

@robertrodriguez1964 8 лет назад

try your dealership. my throttle lock only cost 15 way back when. it takes a little to install but it holds good fast and easy to operate with gloves on. still a clamp but its fork goes around your cable base, then the thumb lever locks into place without having to over turn.

@ghostwatts7802 8 лет назад

Theres one called a throttle rocker if im not mistaken.I know somone who has had one on there bike for like 4 or 5 years and its still holding up.Pretty cheap too.Its called like throttle rocker cruise assist and then theres pretty much the same thing called cramp buster.Not knocking these at all these are just the first time ive seen these ones myself.

@sukheshk623 7 лет назад

what if there is an emergency (dogs and cats running across or dumb bastards changing lanes without indication) and we want to close the throttle quickly and squeeze the brakes. Is it possible to push the throttle forward and close it while this clamp is locked in a certain position?

@6Twisted 8 лет назад

$20 for 50¢ worth of plastic/machining... They must be raking it in.

@SmallSpoonBrigade 7 лет назад

Depends how many units they're selling. Getting this sort of stuff set up can be extremely expensive, but I'm sure they're doing enough volume to make up for that. I'd personally go with a crampbuster or similar. It's not cruisecontrol, you still have to have your hand near the throttle, but it does allow you to use your wrist to keep the throttle engaged, so you can relax the fingers for a bit. The other nice thing, is that they tend to be even cheaper.

@bicycleninja1685 4 года назад

Wondering if anyone tried to 3d print one.

@lifeofalex2942 8 лет назад

Amazing video i really enjoyed it and its really helpful, for me and my friends thanks !

@davec6244 5 лет назад

I'd only use these on a very long ride on a stretch of freeway with not much traffic. Like if you were taking a cross country trip on your bike and going across Texas. Lots of long flat open roads that go on for miles and miles. How quickly can you let go of the gas in an emergency with this thing on your throttle?

@SLAYEROFGAINTS 8 лет назад

A thick ZipTie can also work if the end flap is against you brake simulating a cruse

@mikelepak4307 8 лет назад

go cruise has a metal one similar to the omni cruise for about 20 bucks cheaper. Makes a great addition to those long rides.

@jakemandel92 6 лет назад

My one concern is what if you have to decelerate on short notice? Factory cruise control will disengage as soon as you touch a brake or the clutch, this would keep going..

@xtek13 8 лет назад

lol. I was just looking into a type of cruise control device r6. thanks for product review. Chase you think u can try one of those 360 degree camera views?

@Javierlopezp 8 лет назад

My back will be very thankful haha. Great video Chase!

@Ojisan642 8 лет назад

These are the cheapest temporary ones, you should review the kaoko throttle lock which you actually install into the handgrip.

@muhdfirdaus9476 8 лет назад

Hi I'm Firdaus from Singapore and I was wondering if you can do a video of Husqvarna nuda 900r if possible thanks..

@Skyerzen 8 лет назад

little tip here. IF you get one of these (I have the metal one) DO NOT and let me repeat. DO NOT LET GO OF THE HANDLEBARS! Again, with me this time: DO NOT LET GO OF THE HANDLEBARS! It's ok to let go of your handlebars if you are not using a cruise control clamp, but if you are using it... DO NOT LET GO OF THE HANDLEBARS! (it's ok to let go for short amounts of time like to quickly stretch your arm I guess but briefly) Keep your hands on the bars SPECIALLY your throttle hand! The only way to deactivate it is closing the throttle yourself. This device is meant ONLY alleviate the stress on your arm caused by keeping the throttle open, NOT to allow you to completely let go. I CANNOT Stress enough how dangerous it is to let go of the handlebars while this thing is on.

@luc1ferblack 8 лет назад

+Riggro why?

@Skyerzen 8 лет назад

+Jason Leo There's a reason throttles are sprung to return to the close position, There's a reason why cruise controls on cars are designed to shut off when you touch the brake. In a car you can get away with more since you are in a car, but in a motorcycle, remaining IN CONTROL of your bike 100% of the time becomes the only thing that keeps you alive. This is just a tip from me, I mean you can do whatever you want. I'm the type of rider that NEVER rides without a motorcycle jacket and pants with kneepads and riding boots.

@luc1ferblack 8 лет назад

+Riggro hey mate i hear you there i just thought you was reffering to something more than the obvious. i assumed maybe this unit can fail or something

@Skyerzen 8 лет назад

+Jason Leo ah no no no. it works so damn well at keeping the throttle open that I feel it requires you to be extra careful around it to avoid a runaway bike. Slapping around for the brake because your hands were off the handlebars in a panic is not fun, and this thing makes it even worse! If you press the brake and this thing is engaged, it will ACCELERATE the bike. I'm just trying to warn people not to be too complacent around these devices.

@luc1ferblack 8 лет назад

+Riggro ah ok it was my understanding that it didnt have to be super tight so you can still close the throttle and any hand pressure on the throttle when pulling the brake would cause the omni to lift not the throttle to move. hell i have seen similar done with a cable tie but i dont have one yet but i assume you do

@kedde2005 7 лет назад

Any alternative to this for europe? it will be very expensive for me to buy one of those and ship to europe... like above 100 us dollars with tax lol

@ruhungry2828 3 года назад

What about rolling off the throttle. How does it disengage?

@kiddoo13 8 лет назад

what if you have to emergancy break? im assuming that your throttle will still be engaged when you break with this thing on, so it doesnt seem very safe to me. but what do i know, im just an idiot on the internet