No video :(

Motorized Bicycle - 87cc Frankenstein vs Phantom 85 - Night & Day Difference!

Подписаться 238 тыс.

Просмотров 65 тыс.

50% 1

Please subscribe for more! Today in this video we are trying a new setup of 2 stroke motor on a bicycle to see how fast we can go. This new engine is called the Frankenstein 87cc with the MS460 cylinder. This is basically a combination of a china doll and a chainsaw cylinder. The Phantom 85 is a copy of the original Frankenstein motor built by Ken Hinson a professional engine builder. Please look at the links below for all the parts used in this build:
Speedometer app: apps.apple.com...
Engine: Please see the engine decal in the video
Tires: amzn.to/2XbrGsU
Lights: amzn.to/38ZlOFR
415H Chain: amzn.to/2VCdzN2
Handlebar: amzn.to/3Eaobnx
Stem/goose neck: amzn.to/3lfNEDJ
Thumb Throttle: amzn.to/3z4X5L9
Double springer front forks: amzn.to/3A8ZTYG
G2 Reed: amzn.to/390WBuQ
G2 Reed intake: amzn.to/3C6wcsa
Exhaust: RM85 from a Suzuki (can be found on ebay). Also needs header to be welded.
Exhaust Silencer: amzn.to/3uk1M2N
Spark plug: amzn.to/3m0VAZO
Mikuni vm18 air filter: amzn.to/3F3PtMT
22mm Cross bar (used as pipe/exhaust support): amzn.to/3zSQDal
22mm clamp on mounts: amzn.to/3CTggcR
Phone holder: amzn.to/39SL7d3
Royal purple 2 stroke oil: amzn.to/3AUtxRS
#motorized #bicycle #87ccfrankenstein

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 152

@johnjriggsarchery2457 2 года назад

I love the idea of these simple engines because it takes us back to when people knew how to work on their own machines. Heck, I just bought one just because.

@duskycotw8404 Год назад

nice man

@JMB676 2 года назад

Such a sweet setup brother I definitely want to build one of these for my channel, hopefully one day I’ll be able to afford it so I can build it. Thanks for sharing

@musclevation9640 2 года назад

I did some research, and the cylinder on the frankenstein is where all the power comes from. Its a Nikasil coated STIHL chainsaw cylinder and piston. At least that's what the original Frankenstein from Zeda Motorsports was. You can get 10 horsepower stock just by bolting one of those babies on with a good carb and pipe. They're rev out to like 14000 RPM!! That's why Stihl chainsaws are the best.

@chrisnano1266 2 года назад

Stihl is German engineered

@dmoore0079 2 года назад

The Stihl chainsaw cylinders have a couple of benefits - 1) much larger bores available than what you can get with the Chinese bicycle motors and 2) Much better port design and timing - especially the transfers, which provide much higher fuel velocity into the cylinder. This provides a lot more all around power than the bike engine cylinders. I'm currently working on putting together a Stihl 044 hybrid (only 50mm bore, but the piston uses a 10mm wrist pin which is a drop in fit for our pistons). With that cylinder and a case reed setup, I should be able to come out somewhere around 6-7hp.

@JDProductions_YT 2 года назад

@@dmoore0079 is there any way u can send me a link to where i can get the piston and cylinder

@nimbusnimbus.IV. Год назад

@@JDProductions_YT Amazon much????

@phoenixarizona8441 Год назад

Yes sir once you hit the poweband better be hanging on I've gotten mine to 45 50 mph before I backed off with more throttle left feels like a rocket 45 50 is hauling on a motorized Bike

@garylee7774 2 года назад

All the Super Bike Racers complained about not seeing videos on Ken's engines... so thanks for posting this! So many haters!!

@KB_Joys 2 года назад

I've been interested in those expansion chamber pipes like yours that mounts downwards. Wish I could find a ready made one for a good price. Nice bike. ☺️

@leonardarola 2 года назад

Thanks for the ride.

@mikemiller3303 2 года назад

I'm jealous dam nice ride and OMG 55 mph or close enough lol nice ride safe

@derrickstell420 Год назад

My 100cc stock is going 36mph with the 34tooth sprocket, can't wait see top speed with these new parts coming in gosh seeing him do them speeds makes me hhyyppeeeee

@joey0077d 2 года назад

Awesome!! Nice build. Easy 60 with upgrades. Thanks for sharing! 👍🏼👍🏼👍🏼👍🏼

@Westhelockpicker Год назад

They need to make a good expansion chamber exhaust for the phantom 85! I already got the G2 reed valve so I could install a 22mm pwk carburetor. I've actually heard of people drilling holes in the bottom of the stock exhaust but I can't imagine it sounding good or give you the power of a good expansion chamber and awesome looking bike!

@Littleevil9975 2 года назад

I like that motor setup looks sweet and nice run to bro for some reason I had to subscribe again to your channel said I was not subbed

@MJTechChannel 2 года назад

Thanks for your support! Truly appreciate it my brother

@Littleevil9975 2 года назад

Welcome my brother anytime

@garylee7774 2 года назад

Same here! Had to submit again! See yall on the FB pages!

@kjsmolik 2 года назад

The original Frankenstein was not built by Ken. It was built by Robert Buanchi with zeda motorsports years ago before Ken started.

@warscarz5541 2 года назад

You are correct but ken hinson perfected it rob built the ms660 and didn't make many of them that was right before he retired ken started about 2 1/2 years ago but has done way more I have a 395xp chop top and he built the sawzilla the 127cc 088 ms880 magnum and ms440 and 460 also have a 660 the 440 50mm hit 60mph 36t sprocket if you tune that ms460 52mm right and right pipe you should do 65,+ mph

@kirstenspencer3630 2 года назад

Very nice build, much impressed

@motorizedbicyclerider5296 2 года назад

Killer build🚴‍♂️💨💨💨💨💯very nice speed 💨💨🤙✌

@713Ace529 2 года назад

Thanks for sharing this. I have save a special bike for this and hopefully one of this days I’ll start collecting parts. Thanks brother. 👍

@valentinonino674 8 месяцев назад

Very nice I finally bought a bike Huffy Nel lusso

@DisturbedVette Год назад

man muscle car owners get shit on when they have a v6 and hondas for having a 4, but here are these people enjoying their literal half litre 1 cylinder, 1 speed, 1 wheel drive machines they built at home with a kit from amazon. cant wait to have my own then upgrade to a zx6r (totally the same thing)

@DJb-ill219 3 месяца назад

42 cruising is Nice 💯

@kimdecastro9156 11 месяцев назад

sharp looking bike

@hotmom7241 10 месяцев назад

what is your rear brake? coasters? i didnt see any disc brake or top mounted pad brakes

@joneserupinsmoke9161 2 года назад

I'm thinking abr getting a 32 tooth just ti see the top speed.I like the pick up in the bigger sprockets

@jamesfulerten8494 2 года назад

I don't think people care about top speed that much because you really don't need it. What is more important is take off torque and powerful reliable quick take offs from lights, stop signs and moving across intersections quickly and then reaching a reasonable cruising speed of 20 to 30 mph with some torque left over. It is fun though to find out your motors top speed although you may never use it daily.

@marcusofflee1592 2 года назад

Nice Motorized Bicycle ! 👍🏾

@joneserupinsmoke9161 2 года назад

Yea I dnt know if the price fir the 85 justify the speed in it.I paid 180 with delivery for the anbull "100" cc and rite out the box with one home free mod hit 39 mph on a 44 tooth sprocket

@refuge33 Год назад

no way your hitting 40mph with a 44tooth rear, i don't care if you stick a ls7 in it. a 44 tooth won't go that fast unless your Anbull is hitting 17,000 rpm it's called mathematics bro, learn some...

@matouslitera8073 2 года назад

Man she pulls hard. I'm a little jealous. I don't have the money for a built engine like this. We don't even get Phantoms here, just 50s, 66s and yd100s, nothing else

@MJTechChannel 2 года назад

Man that sucks 😕

@JMB676 2 года назад

Yd100 can do this with work like this has with good port timing, I just build a dio Reed for my buddy and he hit 52mph and he said it had a lot more but got nervous on a 32t sprocket. My personal yd100 piston port hit 47 just some port work with 32t sprocket. My personal yd100 dio Reed hits 45 easy with 44t sprocket. So you got what you need tbh just got so the work, it’s not hard but if you need help and advice hit me up.

@scotthansford3657 2 года назад

Do a follow up video!

@warscarz5541 2 года назад

Hey bro love ken hinson I have the 395xp chop top with pw80 head and I had a ms440 with a kx85 pipe and a 36t sprocket and a vm24 carburetor you definitely need a mukuni and go back to a 36t get a mukuni vm24 carburetor or tm24 and take that long rubber pipe off you have no power band the pipe length is wrong you can hear where the powerband wants to hit but it studders cuz your shockwave is not getting back to the cylinder in time my ms440 no reed or window piston just two finger ports and it did 58mph power band should hit 38/40mph on a 36t sprocket anything below 36t is to small for that motor

@vlogcity1111 2 года назад

32t teeth is where it’s at especially for cruising around 20-30mph without having it revved to the gills.

@coltonmcelroy9792 2 года назад

When you say two finger ports, Do you mean two finger ports on the side of the piston on the exhaust side? Can you explain a little more for me? I’m currently contemplating buying a ms440 cylinder an piston for my phantom 85 bottom end an running it without a reed an using a vm24 carb. I’m just wondering what exactly I need to do with my piston when it comes to a windowing it. I can’t just leave it sealed without porting it out correct? Basically can you give me a run down if exactly what I need to do to bolt on a stihl 440 to my phantom 85 bottom end. I plan on using a kx85 pipe also I’ll cut an re weld to work.

@ArthronOfFir3 2 года назад

hey would you come by to pompano beach with any build to see what I'm needing to do on my build (RM80, high compression head, arbeo 15 15 sha carb and custom back wheel)

@Niko-fp1bj 2 года назад

Complimenti a chi lo elaborato

@S.K.L.I. 7 месяцев назад

This is cool but the air intake facing backwards doesn’t make sense to me

@johnnybbgunner2136 Год назад

Very cool 😎!

@Oneandunn Год назад

I’d love to get into this hobby but am having trouble getting the funds, could you point me to a good motor to use to get to work? This way I only gotta buy one

@alanspring8462 Год назад

Wow awesome

@motorizedbikesar7000 2 года назад

Cool video bro 👍👍👍... Thanks for the content

@alanspring8462 Год назад

Happy I subscribed.

@mozezcen-valley7555 2 года назад

I wonder could this be a reliable engine for a daily Rider and how long would it last my current engine has about 6 years and no problems but only max out at 40

@MJTechChannel 2 года назад

It all comes down to oil quality, mixture and how hard you ride. If you try to always shoot for the max then it might not last as long. This engine sounds relaxed at 35-40mph.

@mozezcen-valley7555 2 года назад

@@MJTechChannel yeah my daily Rider top speed is 40 and man that thing loves to scream at 38 and 40 all day long so far it's been two years solid actually no maintenance or tighten up anything it's holding up great and it's an old motor I got from some other dude originally topped out at 32 miles but once I did some Port work I got it to hit the 40 mark it's not the fastest or quick is bike but it gets used to point A to point B I'm just curious with the conversion you have to retype holes or use epoxy or J-B Weld which I really don't think does good over in heat

@dustinh4175 2 года назад

40s good enough for a daily

@mozezcen-valley7555 2 года назад

@@dustinh4175 it is !

@earlgarcia9824 2 года назад

Change that chain guide , spring loaded tensioner is needed , bigger gauge spokes especially at those speeds , it's cool it's fast , but definitely not a daily commuter , it's a bicycle frame, I ride motorcycles ,I wouldn't even think about those speeds on a bicycle. Stay Safe.👍

@garyhollin9702 2 года назад

Where can I find the Frank. Motor and how much cost.

@fredfiftyfour2183 2 года назад

Wondered why the head is on sideways? The fins should be parallel to the airflow not perpendicular to it???

@safetyfirstintexas 2 года назад

its a chainsaw head

@arrepuess Год назад

Id try the HDA 43 carb. Its a pumper carb that aerates fuel much better. Its a different setup, but ive found they are way easier to tune. I tried a lesser hda223 carb on a cheap flying horse engine that i ported, with stock gears, no reed, and stock but modified exhaust, and got 36mph. “Which is not alot, but was mostly stock”…But it vibrated like crazy as its a crap engine. “At the time i wasnt knowledgeable on what bike engines were best”. I have a video of it on my page. By the looks of it, the carb on these bikes have a a very long travel. Especially the reeded ones. Not sure but looks like its overkill when it can be simpler, more direct, and way more tunable.

@Bigfootman88 2 года назад

Hey bro I just got the same carb PWK 21mm but is there a way to adapt the larger intake on the carb to the smaller 40mm intake tube even if not using a reed setup? If so where can I get it? Tried local stores and they dont have anything that would work.

@pmilluh 2 года назад

Have u done anything to it when you got it or is it pretty much stock?

@giutatgeorge2010 Год назад

If you got rid of the 2 foot of heater hose tubing youd prob hit your p.b. easily and prob 60 ...Your murdering the power with the exhaust setup

@ericwiederrick3323 11 месяцев назад

Okay you say you went what was your wheel spacing on the screen you should probably a gesture will spacing to the size of the bike

@Snake.br549 Год назад

The problem is in the Reed valve chainsaws don't have them intake and carb are just too big for some reason that just kills the torque

@RubberSalt Год назад

On a well ported motor, those carbs work just fine.

@kjsmolik 2 года назад

What size sprocket

@ThatOneGuyWithTheEye 2 года назад

What adapters are you using to attach that reed valve to the round intake? It would really help me with my build. Thanks for any info!

@safetyfirstintexas 2 года назад

plumbing supply store cast iron coupler in the right size.

@ramosbhenyjulsg.5355 2 года назад

Nice bike

@hazaelmotorizedbikes225 2 года назад

Try a mineralli from Smolik or build one my friend has one and he gets to 58 no problems

@MJTechChannel 2 года назад

Will look into it! 😉

@Littleevil9975 2 года назад

I agree you should try one I love my minarelli there sweet bro

@hazaelmotorizedbikes225 2 года назад

@Kevin Stearns bruh u fr? Or u joking lmao

@Littleevil9975 2 года назад

No they won’t it’s a minarelli you must be thinking a regular motor

@hazaelmotorizedbikes225 2 года назад

@@Littleevil9975 true those mineralli are beast

@DemonratsRevil 2 года назад

Lose that chain tensioner first. That will only help.

@deesmith2560 Год назад

Who sells this Frankenstein motor and kit?

@JMB676 2 года назад

What size piston is the frank have. There’s two sizes I believe for them just wondering if you know?

@richardtrumble1468 2 года назад

Cool as s*** man

@phoenixarizona8441 Год назад

What phone holder are you using I need one

@jayrazz8499 Год назад

What carburetor??

@jaycee2366 2 года назад

Where did you buy that carb and hose attatchment to the reed valve

@paul-ys6ou 11 месяцев назад

where can i get the engine?

@johnpaulk6769 2 года назад

Dude feather the clutch and rev as you let out in stages and you'll be able to pull from dead stop, but it'll eat the clutch pads up

@andysendlbeck914 Год назад

True until you find the pads ya need! Amazon go find the green ones, order a 30 pack thank me later:) you may never need the 2nd set... they're not even comparable and they're the same price almost

@deleted203 2 года назад

Phantom def got there quicker in my opinion. Both are great saw engines if built right.

@waltwalt9632 2 года назад

The phantom was gear lower, that’s why it got there quicker, an only got 44mph with that gearing so the phantom is definitely slower

@adamsicotte1151 2 года назад

@@waltwalt9632 obviously

@waltwalt9632 2 года назад

@@adamsicotte1151 want a cookie?

@adamsicotte1151 2 года назад

@@waltwalt9632 what

@jamaldrinkliquor7445 Год назад

The ms460 almost cruises at the phantoms top speed...At least for that 33t you are using. What was the top speed on a 36t?

@zachlamb257 Год назад

I have a couple of bikes that came from you id like to chat with you about them there really nice

@scotthansford3657 2 года назад

How’s the motor holding up?

@soundqubedkiller5885 2 года назад

So you got more mph with a bigger sproket? Is that because of better use of the power band?

@neonninja6117 Год назад

Yes because you need just enough torque to get those top speeds, with a smaller sprocket you get less torque

@hankhillsurethra 2 года назад

What speedometer are you using?

@SuperBlunt 2 года назад

What motor mount is that for what size?

@jase-so3ft Год назад

What fuel ratio do you use?

@DylanSchmidt-gu2sx Год назад

So how long did the engine last you riding it like that? At least the top end? I’m always scared to go full throttle for long periods of time.

@bryceevans8340 6 месяцев назад

I do like 30 its a good speed but my bike does hit 40 something with a head upgrade, expansion chamber, racing carb, 36 tooth sprocket, and the high performance cdi with magneto.... I use my bike everyday and go like 40 half the time but the piston rings like to wear along with the clutch pads a little faster than normal it's been like 3 or 4 months still going strong with no major problems at all going easy on your engine is the way to go so it lasts longer before having to rebuild anything

@DylanSchmidt-gu2sx 6 месяцев назад

@@bryceevans8340 absolutely. I’ve built close to a thousand bikes now. Although I know how they preform I like getting information from other people as well. Never know everything! Always something to learn. Just love seeing more bikes buddies out there having some quality fun! Good to know that. I had someone buy a bike from me not to long ago, dude pinned it full throttle and burnt a hole in the piston about 5 miles down the road. Dude was obviously a drug addict. I made him take apart the kit with a wrench while I had a table full of power tools next to him lol. And made him pay for the engine. Stay safe buddy.

@justforFUNdayNIGHT 18 дней назад

a phbg carb would let you hit faster ;D this pwk are truely to big get 19-20 mm to get really fine tuned this engine

@peterfreekinpan1300 2 года назад

Hello I love your build could you tell me what size rear sprocket you are running? I have a awesome bike too keep on riding brotha 2 stroke life...

@MJTechChannel 2 года назад

Hi there! I am using a 33t from MBrebel.com.

@Tolga_Saiya 2 года назад

hey :) which carburator?

@warscarz5541 2 года назад

Bro my ms440 no reed 50mm did 57mph on a 36t sprocket and a kx85 pipe vm24 mukuni carburetor and definitely got up there quicker then your 460 you and not tuned right and get rid of that silencer killed your power band and you should run 36t anything smaller and you will loose power these saws love 36t-40t sprocket if you ride trails 44t is fine on a 36t your powerband should hit 38-40mph if not your pipe is to long

@derekthompson6653 2 года назад

I can't get into that thumb throttle thats to much as riding a four-wheeler. You need the regular motorcycle throttle that will look better.

@jonathangray5840 Год назад

U should be telling everyone that those top speed runs r downhill considering on a flat road with 28 tooth sprocket the phantom sits around 40mph

@juangrabrielhurbina517 2 года назад

Donde las venden

@harryburford6629 2 года назад

i thought you would get it going on this viedo what happend

@refuge33 Год назад

interesting as most comments are apparently from experts in this field who all seem to know exactly what others need to do to their bikes, and they should know as no matter what the video is on, they have the same bike/engine/pipe except theirs goes about 1000 times faster, they got it for 1/100 of the going price you paid, and without riding your bike, kow exactly what jet, cyclinder, carb, sprocket you should be using instead of what you are. Anyone with common sense needs a Scott Air Pak self contained breathing apparatus to avoid being overcome by all the bullshit around here. I bet most are in their parents basement and don't even own a bicycle or if they do, can't ride it casue they are grounded....lol

@ManiacRacing Год назад

Lol! Could not have said it better myself. Racerbois squealing and frothing with expert rage. And most of them could not file a set of points to save their lives.

@pick-the-kicks 2 года назад

My last gas motorized bike used to hit 60mph.

@brucewilkey3535 Год назад

🙄

@pauls5745 10 месяцев назад

subbed but can't notifications

@danajett Год назад

I saw videos of the phantom 85 v3 going faster

@daleglastonbury96 2 года назад

So you were riding a bicycle at 53 mph, with lace up shoes / short pants / a thin short sleeve shirt / no gloves, and as for a helmet well who can say.......Where I'm from...... we call that a "Bell/End" on a bike. Although this term would usually be of a motorcyclist.....but a bicycle with a motor, close enough..

@ericwiederrick3323 11 месяцев назад

Cuz as to my calculations you were clearly going only 25 30 miles a hrs

@lawrencebull9824 2 года назад

Which country is this in

@safetyfirstintexas 2 года назад

usa. florida

@iloveRedVsBlue 2 года назад

Idk if id trust that fork at those speeds.

@brucewilkey3535 Год назад

🙄 upon hearing this the builder immediately removed the Springer front end and put on some forks from his daughters Holly hobbie 20 inch complete with a flower covered basket. Now he goes 70mph without any worries. 😆