Motorola Moto X Screen Repair & Disassemble

Подписаться 146 тыс.

Просмотров 173 тыс.

50% 1

www.fixez.com presents the Motorola Moto X Screen Repair & Disassemble video. Visit Fixez.com for all of the DIY repair resources that will allow you to fix your Moto X display assembly (LCD & touch screen with the frame) quickly, and affordably. Find high quality Motorola replacement parts, premium repair tools and detailed, step-by-step disassemble instructions to help you complete the DIY repair successfully. This video will assist you in safely replacing the LCD and touch screen assembly on your Moto X to get it working, and looking, like new again. If you do not feel comfortable doing the repair yourself- there is no need to worry. Contact one of our skilled repair technicians at 866-233-6460 or support@fixez.com and they will fix your Motorola smartphone for you. Don’t forget to subscribe to our RU-vid Channel for additional DIY smartphone and tablet HD repair videos.‬‬
Get high quality, brand new Motorola Moto X replacement screens and parts at Fixez.com: www.fixez.com/s...
Find premium repair tools to help you complete your DIY Motorola smartphone repair at Fixez.com: www.fixez.com/s...
Connect with Fixez.com:
Like Us: ‪ / fixez.com‬‬‬‬‬‬‬‬‬‬‬
Follow Us: ‪ / fixezdotcom‬‬‬‬‬‬‬‬‬‬‬
Pin Us: ‪ / ‬‬‬‬‬‬‬‬‬‬‬

Опубликовано:

19 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 114

@kv7797 8 лет назад

I recommend anyone doing the repairs/disassembly to get a set of Torx screwdriver sizes. My phone did not have any T5 size, but instead a couple of T3 and T4/T2? Expect a work frame of 20-30 mins for new and cautious users like me! Overall, this video help me with my 1st generation moto x, as it gave me confidence in where to avoid the wiring and screws.Aside from three micro pieces that I found inside my phone, that weren't mentioned, the video is accurate (a rubber supporter, the SD support frame, and some sort of device next to the earpiece speaker or probably a different model).

@AlexanderTavarez-Texas 8 лет назад

As a professional tech, you left out some very important points: -The back cover is lightly though firmly adhered to the phone. -To remove the volume buttons, there is a little metal clip that must first be removed from between them. -The earpiece speaker is adhered to the housing. Otherwise, it is obvious that, for showmanship, that Moto X had already been disassembled. There is no way the original adhesives would have given way that easily.

@tbaier101 8 лет назад

Agreed on all counts. Getting the back cover off was the most difficult part of it because of this. Wish I had known it was glued. Helped to insert small wedges (I used guitar picks) to keep the back from re-clipping itself back in as you work around and then sloooowly work the battery and ribbon cables away from the blue sticky stuff on the back cover. Patience and a delicate hand are required. My earpiece speaker was also different than shown. Also, my screws were T4, not T5. All in all, great video - very helpful.

@praweenfrancisbarla2426 7 лет назад

If the internal sim reader is broken then is it necessary to change the entire motherboard

@MGOFor3ver 6 лет назад

No if you have another dead board and a good heat gun.

@jeremybarr5415 8 лет назад

Just a helpful hint this phone is a little bit more complicated than some others there is adhesive that helps hold the back cover to the phone so apply a little heat and take your time. Also don't try to remove the ear speaker with out slightly heating it from the front side of the phone or you run the risk of separating the speaker itself since it is glued in place. The phone in the video above looks like it is an easy job because it has been taken apart before IE the speaker circuit isn't even attached to the phone when the back cover is removed, it should be one of the flex cables that need to be unplugged before removing the main board.

@Fixez 8 лет назад

+Jeremy Barr Thank you for watching. We appreciate the helpful tips provided.

@captainkaufmann 9 лет назад

Thank you for the video. It helped a lot and I was able to replace my broken screen and get it working perfectly. You must have disassembled that phone before because nothing on my phone just fell off. The screws were all on with Locktight and the battery and mother board were glued down. They came off hard. There was another gizmo on my phone you didn't have right beside the camera that had to be unplugged. Anyway, thanks again your video taught me a lot.

@Fixez 9 лет назад

+captainkaufmann We apologize to heat about the troubles. Thank you for watching!

@ilyashpolsky6162 8 лет назад

I watched another video, trying to explain this same repair, and it was really awful. This is so much better, thank you very much.

@Fixez 8 лет назад

+Ilya Shpolsky We appreciate the positive feedback. Thank you for watching.

@praga2823 9 лет назад

thanks for the awesome video. i had a cracked screen and this video was so helpful. i am facing one issue now. camera is not getting initialized. its showing camera error and please restart. but still couldn't resolve. and some times, it opens only front camera

@randywraith 9 лет назад

T4 driver. My side buttons didn't come out. There is a tiny metal clip holding them into the frame. Neither are big deals, it was a great video. very helpful!

@Fixez 9 лет назад

+randywraith Thank you for the support!

@jasonsebastian3562 9 лет назад

Just replaced my broken screen, the guide was nearly perfect and the new screen looks great. My phone had a few very minor differences/parts but that's not surprising and they were easy to work around. I wish the walk through would have mentioned that the back cover is glued on, getting that off was the hardest part. Ended up using a hair dryer to heat up the adhesive, but it was still difficult. Another issue is that my volume button isn't fitting correctly (regardless of orientation), I thought it must be the frame so I swapped them with no luck. It doesn't rock back and forth in either frame that is attached to the new glass. I Fooled with it for a while but it was getting late and I lost interest. With the phone fully assembled it's easy to tell that somethings wrong with the buttons action but it works well enough to bring up the touchscreen volume and will get me to the end of my contract. Parts came really quickly and I loved the guide. Thanks.

@jasonsebastian3562 9 лет назад

Since replacing the glass/lcd I have one problem. When a call is started the screen goes into sleep and I can't get it back out unless I do a hard reset. The power/reset button works properly in every other application. Any ideas? Seen this before? Didn't do this before the replacement. would love your input Fixez!

@jasonsebastian3562 9 лет назад

Also, what was I supposed to do with the adhesive pad you sent with the new part? wasn't in the video.

@justinrobertson5493 8 лет назад

A couple of tech tips for anyone deciding to tackle this, it was my first time breaking into a phone like this. Two things that I noticed: you don't necessarily have to remove the volume/power buttons and the power/volume ribbon cable may not want to snap back in. When I couldn't get the cable to snap back in I taped it down with electrical tape to ensure a good connection and added a couple of layers so that the rear skin would sandwich it in there and keep it from moving anymore. It was an adventure to say the least.

@Fixez 8 лет назад

+Justin Robertson Thank you for the feedback.

@jeffpeck7007 9 лет назад

Note, it appears that motorola has used a variety of screw sizes. The video claims T5, some comments say T3, mine has *T4* screws. I suspect that many of the folks who complain about the poor quality of their T3 drivers may have been mislead by using them in a T4 screw (the driver fixs, but loosely so it will strip either the driver or the screw head) I eventually had to drill off the head one of the screws after it was stripped; If i can't find a replacement screw, i'll just super-glue that corner of the display.

@jeffpeck7007 9 лет назад

Jeff Peck Also, the video doesn't show it, but you need to be agressive with a heater/hair-dryer to get the back off; must soften all that glue that holds the back to the NFC antenna (I broke my NFC trying to pry off the back, but it's not that critical; and only $15 to replace) On the other hand, you really don't need to separate the battery from the mother board; just un-clip the button-cable, lift the motherboard and battery, and place on the new screen/framework. less to un-glue, less to reconnect.

@jeremystauffer8467 9 лет назад

Jeff Peck i went out and bought a t5 at lowes only to my dismay to find out the bit it to big. mine must have t4 screws also.

@The1mariosonic 9 лет назад

I need to replace my front and back cameras but I'm not sure which screws are they, how can I tell which ones a T3-T5?

@jeremystauffer8467 9 лет назад

Im not to sure I there really is a way to tell before hand if thats what you mean. I ended up buying a Screw driver kit online that came with t3, t4, and a t5. My moto x 2013 had t4 screws in it. good lcuk

@The1mariosonic 9 лет назад

jeremy stauffer where did you bought your kit? Just wondering. Any good ones from Amazon you recommend? I have two moto Xs and I think I stripped some screws and the torx screwdriver on that one so I'd like get higher quality ones.

@sethgeorgson7775 9 лет назад

I thought this video was nice and the replacement screen was great. Here are a few notes on my experience: Mine had T4 screws. Make sure you use the right size or they will get stripped. I tried T3 and got most out but two ended up stripped. I used a small pointy dremel bit to grind a slot into the two stripped screws to get them out with a slotted screwdriver. It took way longer than necessary, if only I had used a T4. (This has been noted by a number of others) Be really careful with that small white ribbon connector on the battery (for power and volume buttons). It came apart for me, and if you look closely at about the 10:00 mark in the video you can see it came apart even for the demonstrator. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bR2k7kEZaj4.html. If it comes apart you can pop it back together, but it's a pain. If you get the whole screen with frame assembly, check for a small piece of protective tape over the microphone hole on the inside. I got the whole thing put back together and the mic wasn't working, so I had to do it all over just for a tiny bit of tape that I missed.

@felinunez498 8 лет назад

well I replaced my screen digitizer I bought it on eBay cheap price 33 dollars and yes is a pain in the rear to work on this phone,but after 2 hrs I get it done thanks to this video.

@Fixez 8 лет назад

+Feli Nunez Glad to hear we were able to help. Thank you for watching!

@rafaelzuniga600 9 лет назад

Yes it is possible to replace just the glass part on your moto x. I did mine myself two days ago. Just make sure you know how to put the parts back in place. Its a pain on the rear end a little more difficult than other smart phones to replace glass part.

@asdef50 9 лет назад

Could you please make it more obvious that it is a T3 torx NOT a T5? I don't think its fair to all the people who accidentally purchase the incorrect tool based on your video's advice. Thank you for uploading this, it has been a lifesaving video but now that I have my supplies it'll be another week before I get to use my phone again.

@EricOlivierTIENEBO 9 лет назад

Hello. Thx for this helpful video. Could you help with my moto x 2nd gen screen got broken yesterday.

@SeanMaroni 9 лет назад

Worked perfect! (t3 screws not t5)

@eliasar 9 лет назад

+Sean Maroni I stay away from comments usually, but this is absolutely correct. I've already purchased the wrong screw driver and I will have to get a T3.

@Red-gy9gx 7 лет назад

wow I just learn how take it apart, the hard part is putting it back together

@JCSosia 9 лет назад

Is there a difference with the wood back version? And the replacement is an LCD screen. How will that affect the phone previously having an AMOLED screen? Or am I talking about two different things?

@those1kidds 6 лет назад

amazing video. Just did the repair but the screen doesn't turn on...... it vibrates like it's turning on but nothing appears on the screen, even after switching out the lcd screen, digitizer and glass. Any idea what would be wrong with it?

@BannedBlue 9 лет назад

My Moto X recently dropped and hit the floor on it's bottom left corner (when viewed from the front). The brightness seems to be permanently set to less than 0. I can only see through the screen in pitch black darkness, and even then, barely. Could this be an issue of a loose part? I'm thinking of opening it up to try and fix it. I appreciate any help. Regardless, great video. I'd feel confident using this as a guide after watching it and seeing you respond to comments.

@shahzebraza16 10 лет назад

can you do a LG l90 headphone jack repair process video??

@scottcrainey 9 лет назад

A few other folks have mentioned that, while the video specifically refers to a T5 Torx screwdriver, that size is definitely too big. I ordered a new screen, and it came with a pry tool, a spludger, and a T4 Torx. I was able to get two of the eleven screws out with it, but couldn't do a thing with the T5 I bought in a kit over at Lowe's. (It wasn't expensive, though, like seven bucks, and now I have a whole bunch of precision bits!) - but no T3. So, on to Amazon. My next kit with a T3 in it should be here by the end of the week... sigh...

@scottcrainey 9 лет назад

Awesome. No worries. It's an excellent tutorial video in all regards.

@AndrewRodX 9 лет назад

wow. i should have come to the comments before. my supplies just came in. good thing i got that t5....

@creativeplanet2820 7 лет назад

My display & touch is working, but the glass is completely shattered on My Moto X 2nd Gen, & you guys have two assemblies which one should I get ????? :o please tell for Moto X 2 & I hope these parts are original or of really good quality !!!

@thetruthalwaysprevails 8 лет назад

thank you very much your bid it help me fix my phone minus the t5 mine was a t3

@Fixez 8 лет назад

+Robert Richardson You're welcome, we appreciate the support..

@SolidMGSnake 9 лет назад

I recently dropped my moto x 1st gen right on its side on hard wood floor and the screen produced random streaks of color making the screen inoperable. So, would replacing the Moto X Display Assembly fix it? Its not a problem with the motherboard?

@Fixez 9 лет назад

+SolidMGSnake Sounds like it should. Your LCD seems to be what got damaged in the fall.

@elmedinamustafa3575 9 лет назад

Could you tell me what to do with the sound volume, my motorola x had a high volume ,but today I realised that I have a lower volume maybe about 50% lower than before, I don't know whether it is because it fell on the floor two or three days ago ..any tips please !

@prettyprincesskelly1 9 лет назад

I've heard that the LCD would be broken since it is being glued to the screen? Is it save?

@ishaansahi 10 лет назад

Can you please make one video on how to replace moto x 2nd gen display

@MrEronc 9 лет назад

Will the screen replacement that Fixez sells work on the Moto X XT1049? This is the Moto X model that Republic Wireless uses. Nobody seems to have the screen replacement for this model.

@MrEronc 9 лет назад

***** OK, thanks. I will order it. I was just thrown off because XT1049 isn't listed as compatible.

@aziziidris9481 8 лет назад

Hey, The best info that I have saw was on Volt daddy (just google it) I bet its the most helpful info on batteries and this kind of thing that i have found.

@robertmccarson 9 лет назад

What part do I order if I want to transfer the frame?

@MrIansmitchell 9 лет назад

Hey! So I dropped my moto X (which already had cracked screen glass) and now the LCD display does not light up whatsoever. The phone rings and turns on/off, alarm I'd set came on, etc. I'm thinking I should disassemble the phone to see if something got knocked loose. Have you experienced this issue before?

@06eclipse2011 10 лет назад

I believe those are actually T3 screws not T5 from what I have seen elsewhere online.

@roshan517 10 лет назад

If my screen is cracked, how do I know if just the screen is needed or the screen and the digitizer both?

@hawksanddoves 9 лет назад

I am having problems getting the connection for the motherboard to hold when putting back together. Any tips on this step please?

@prabhasrivastava6885 9 лет назад

Dear Sir I have the Moto X 2nd generation, of which the glass is broken by accident. I want to know is it possible to replace the glass only or i have to replace the whole assembly. whole assembly is coming half the cost of the phone. Is it possible to detach the glass from the display. Is it practically possible to do so by any means !!

@creativeplanet2820 7 лет назад

Prabha Srivastava Bhai, same here what you did after that ????

@matthewcloutier6468 9 лет назад

I just cracked my moto x screen after 8 months 5 minutes ago. My question: I dont have the absurd asking price for the full assembly you have online. I CAN still replace my screen with just the replacement screen, right?

@matthewcloutier6468 9 лет назад

@fixes.com

@reinisze123 9 лет назад

t4 screws on mine as well, please make an annotation on this video saying you might need t4, now i need to go out and get a t4 whilst this half-disassembled phone just lies on my desk.

@Fixez 9 лет назад

+reinisze123 We apologize for this. We've received mix information as some users have reported using T3,T4 and T5

@marleypeterson925 9 лет назад

If I replace my screen will I lose everything on my phone (photos contacts apps etc) or will it still all be saved?

@craigconway4093 6 лет назад

Thank you for these exceptional instructions :)

@Fixez 6 лет назад

Thank you for the comment and also please be sure to subscribe to our channel. Also take a moment to visit our webpage www.fixez.com

@sherripy3932 10 лет назад

do you have to disassemble EVERYTHING if you just want to replace the screen?

@eligonzalez666 4 года назад

Yes, you do.

@alikiandroutsosantico3268 9 лет назад

i have a motorola motog2 with a cracked screen, but following a wrong tutorial, i wrongly peeled away a copepr sheet covering the battery, and probably also pulled wrong the sim mechanisms, and now my phone doesnt recognise the sim cards. do you know if this is a permanent damage?

@aleksjunior7118 9 лет назад

Bom a tampa traseira não sai com aquela facilidade que a parece no vídeo,ela tem bastante dupla face que so descola com calor,dai o cara vai pelo vídeo e rompo os flex da câmera e outros ali.

@hamedlen3974 6 лет назад

helow i hve moto x also but accentaly fall down and card tir steep on it..is there imposible can pix???

@jackpauerctu 8 лет назад

Hello! where is recommended store online to buy the lcd 4.7"? just dropped my moto x .......it all black now

@Fixez 8 лет назад

+MOHAMED KADEEB We offer these units on www.fixez.com www.fixez.com/motorola-moto-x-lcd-touch-screen-digitizer-with-frame-black

@Jorge-et6ft 9 лет назад

Would this screen work for the XT1097 model? I check the compatibility and it wasnt listed there

@eligonzalez666 4 года назад

Probably not, as to this is a XT1056 model

@edwood6390 9 лет назад

Perfect video! Worked perfecto! Thank you :)

@Fixez 9 лет назад

+Ed Wood You're welcome, glad to hear the news!

@rnagic8652 10 лет назад

It looks easy, but when I pried off my back plate the screws were stripped and could not be removed. I wish I knew that before I bought the kit and new screen. It's a shame, this looked like it'd be pretty fun.

@jasonstr3626 9 лет назад

***** Maybe because the tool kit that was sent included a cheap phillips head screwdriver instead of the #5 torx?

@rnagic8652 9 лет назад

Nope. They were definitely torx. It was just the kids in the sweat shop where my phone was assembled. The little boogers stripped some of the screws when they put the phone together. Plus, they weren't all the same size screws.

@billtaylor7705 8 лет назад

I got one of the first moto x How do I take it apart.

@ridetoalaska 8 лет назад

My Moto X also came with T3 screws, not T5 as stated in the video.

@Fixez 8 лет назад

+Eric Castle Unfortunately, Motorola for this model has this issue. Some units require a T3, T4 or possibly the T5. Our units used required a T5 torx. We apologize for any confusion here.

@CoryGagliardi 9 лет назад

So much more complicated than any iPhone I have fixed :-(. My first failed attempt at replacing a phone screen. Time to head to ATT.

@Baba_Muni 8 лет назад

hello, i recently replaced my phone screen which was broken. Everything works except the sim reader doesnt detect any sim. I'm not getting connected to any networks. Any hellp?

@Fixez 8 лет назад

It's difficult to confirm what could have caused this. We recommend going through the repair process to ensure nothing was missed. It's possible a connection was missed. Also ensure there is no torn flex cables.

@spawnandbatman6975 8 лет назад

I have this phone and the screen cracked. the phone shows a green light on the speaker when charging but wont turn on can you guy repair the phone for me? I only had it for less then a year and it was a great phone for me

@Fixez 8 лет назад

I'm sorry we do not offer repair service. If you feel uncomfortable doing the repair yourself any reputable local repair shop should be able to replace an lcd for you.

@dangelotreston9033 10 лет назад

Since you just fixed it can I have it

@jtrain552 8 лет назад

i recently used this video to replace a broken lcd on my moto x, and upon repairing i noticed that the front camera was not working or appearing in any of my camera applications(camera app/snapchat). do you have any idea why this happened or what i can do resolve this problem. please get back to me ASAP. thanks

@Fixez 8 лет назад

+Elie Jacobson Possible that the flex cable for the front camera was damaged. Inspect to ensure there is no visible damages and if so, you would want to replace this.

@tiagomorais8861 8 лет назад

my moto x ghost features slow after dismonting, UI and apps, all slow all time, help me.

@dr224 7 лет назад

My custom 1st gen moto x has t3 screws.

@yctruth 8 лет назад

I competed the repair ansneverything was working except the screen only cut on in well lit areas. why is that? now the screen doesn't work at all. help!

@Fixez 8 лет назад

+Brianne Jones Sounds like the backlight is the issue. But if you can no longer see the LCD at all, you may have a faulty unit. Just ensure to double check your flex cable connection as well.

@Raj-en1jy 9 лет назад

hello guys @Fixez.com..i got a crack on the screen of my moto x 1st gen(xt1052)..my display nd touch are working perfect..!! nd i dont know what to do..do i have to go for full disaplay repair or just sceen ?? could u guys pls help me in dat..!!

@mikeenstice1966 6 лет назад

I dropped my moto x in the toilet and it was in there for like 5 seconds i got it out cleaned it iff put it in rice right away for 2days and the phone still works just fine and turns on and everything just the screen doesnt detect my fingers when i touch it and reccomendations??

@Fixez 6 лет назад

Sorry to hear about your issue. Whenever a device has been dropped into water, it is a gamble on whether or not the water actually created damage to your device. It sounds like your digitizer may be compromised. If you want to check out the replacement parts we offer for this device please follow the link www.fixez.com/store/motorola/motorola-moto-x

@domrare 9 лет назад

Isn't the moto x screen amoled?. If I replace it will it look worse?

@TrevorAllenTech 9 лет назад

***** Concern here, amoled allows for the active display to utilize only the required pixels to show time and notifications, LCD would require to light the whole screen making it more inefficient to use?

@dutchkork 8 лет назад

anyone else have their back cover glued??...I am stuck on step one! Trying to get this off but going is very slow..

@dutchkork 8 лет назад

+dutchkork ok i realize it's because it's a refurb...someone glued it after they fixed it before...

@Fixez 8 лет назад

+dutchkork There is adhesive keeping it in place. Slowly use your heat gun and a pry tool to help remove the back cover.

@zdenek7220 7 лет назад

T4 indeed

@alexfowler4404 9 лет назад

i recently dropped my moto x in the toilet. The screen is the only thing messed up. The phone will light up normally but i cant tap any of the buttons. Would a new screen fix this issue? Please Please Please Respond.

@alexfowler4404 9 лет назад

so basically what you did in this video?

@jayfig78 6 лет назад

This phone uses t3 not t5

@Fixez 6 лет назад

Hey Jay, thank you for sharing this. Motorola is known to use different size torx screws. We appreciate you sharing your experience on your device.

@SilvioAlcantara 9 лет назад

Locking pins???!!! what a terrible design.

@mangeshgaikwad9653 6 лет назад

Pheww

@seemavedantam6916 9 лет назад

hey my phone moto x was thrown by me at the ground by mistakely and glass was broken and many cracks.But mobile is charging ,its showing the green light ,is it mother board problem also.

@Fixez 9 лет назад

+Seema Vedantam Difficult to confirm this without an evaluation. But for the most part your LCD should be the only thing damaged, aside from the touch screen of course.