MOTU MIDI Express XT 8x8 USB MIDI Patchbay: Why and How I Use It

Просмотров 5 тыс.

% 132

USB patchbay for total control over your MIDI gear. 8x8 merge matrix lets you connect any device to any other that's connected to the Express XT and much much more. Watch all of this presentation now to find out all that this powerful machine can do, and why I use it. #MOTUMIDIExpressXT #MIDIExpressXT #MIDIpatchBay #MIDIinterface

Видеоклипы

Опубликовано:

6 дек 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 20

@PowercoatMusic Год назад

My previous unit was the JL Cooper MSB 16/20, which was a great device that served me well for almost 2 decades. When it started to have issues freezing up, I knew I had to replace it quickly, so I did. Since companies don’t make large 16/20 5 pin DIN port MIDI patchbays like that anymore, my next solution had to be different and the MIDI Express XT checked all the boxes and then some. I wanted to share this information with anyone interested and hope it serves useful.

@toddbilleci8563 Год назад

Very helpful, thank you

@PowercoatMusic Год назад

You're most welcome. Thanks for watching. 👍🏿

@SlaserX Год назад

Great video, thanks for the presentation. I use a Mio10, but I always want to know about more options if I decide to move on from this piece. (especially since at least 2 sets of I/O are dead on mine)

@danieltx7066 Год назад

That was a very good presentation on the Express XT’s feature set. Sadly, you didn’t really go very far into how or why you use it. I was hoping to hear about your specific setup and why it works for you.

@PowercoatMusic Год назад

For more information on the topics you mentioned, check out my presentations “Audio & MIDI Patchbays: Why I Use Them”, and “Home Studio Tactics: Using MIDI Controllers & MIDI Patchbays” on this channel. Thanks for watching.

@davidlillberg3539 Год назад

Very nice video! I’m looking for a DAWless setup and have a question: would it be possible to create MIDI routing presets using a computer, save those and then change in between those with a MIDI controllers note messages using no computer? My intention would be to set up routing matching each unique song and then when playing live be able to switch between them for each song. Best regards!

@PowercoatMusic Год назад

The answer to you question is "Yes". You can program presets from your PC to this device and trigger them using a foot pedal. Thanks for watching.

@edwinkeys 7 месяцев назад

Hello ...This was a Great Info Video...Thank you for all the Info on here ...I do have one Question about one of the section in time line 15:33 ..There is one item that was not covered. ( Comfigure Digital Timepiece ). I have 3 MTP AV and when I open this Item (Comfigure Digital Timepiece) ..Im not sure what this should be user for ? ...Can you Help with this Part of the Configeruation ? Thank you Again for any info regarding this Item..!!

@mmckmusic Год назад

A very well considered video, thank you. Can I ask, what powered USB hub have you settled on?

@PowercoatMusic Год назад

I purchased model from Amazon called "Enter" ($29.99). You can get them a lot cheaper than that. Thanks for watching.

@AKDanMusicMan Год назад

4:53 You say all 3 are connected together, but the picture shows the top 2 connected to each other on the front, and the bottom one is connected to something else? How do you have the 3rd one connected so you can patch from unit 1 or 2 to unit 3?

@richardgordon9939 2 месяца назад

does it have apple silicon drivers?

@chriscantplay...2933 Год назад

Have you tried the SMPTE with a Tascam DP24-SD / DP32-SD? My current solution only has one MIDI in and three out so this looks like a massive upgrade - if it’s works!

@PowercoatMusic Год назад

Using a MIDI sync box and SMPTE , virtually any recorder can invoke transport commands. This one is no different. For more information watch my presentation "Tascam DP24/DP32 SD Digital Portastudio: SYNC to MIDI (No Hardware Required)", on this channel.

@seanwynkoop474 Год назад

@@PowercoatMusic I have the Tascam DP32SD and want to stripe a track to control in real time my Akai MPC Key61 workstation. I do not want to start from the beginning of the track each time to sync the Akai and the Tascam. Will this unit write ( or stripe ) Smpte code on the Tascam so the Akai will pick up any location of the track and still be in sync with the Tascam. If I jog 10 seconds ( rewind / fast-forward ) on the Tascam I want the Akai MPC to resync to the new Jogged Location. Thanks for all you do here !!! If this unit will not do this ... What should I be looking for to make this happen... Thanks Again for any help.