In this video I’ll be unboxing, installing, and reviewing this MTM Hydro Pressure Washer Hose Reel (15m/ 50ft). I’ll be installing a stock Kranzle K10 hose on this reel but it can also be used with other hose types e.g. Kobrajet.
Here’s the link to where I purchased mine from which was setup for the stock Kranzle hose and included the link hose and all the fittings: kranzle-pressu...
If you order from elsewhere here’s what you may need (always check with the company you’re purchasing from first before buying):
1. If you are using an M22 hose, you’ll need a 3/8 male x M22 male fitting to connect your stock hose to the hose reel. Here’s a link to a stainless steel one: carscope.co.uk... If you’re using a hose with quick disconnects then you’ll need a 3/8 male fitting to attach to your hose (the will vary depending whether your hose has a male or female 3/8 fitting attached).
2. You’ll also need a link hose to connect the hose reel to the pressure washer. The outlet on the hose reel is a 3/8 male, so you’ll need a 3/8 female attachment on this end (you can either get a link hose with this 3/8 female attachment, or get an M22 male to 3/8 female adapter if you’re using a link hose which has an M22 female connection at both ends - again this may vary depending on whether you’re using quick connects). The other end of the hose will connect to the pressure washer, in this case it was M22 x 14 female connection, but may vary with other pressure washers.
3. Mounting equipment
If you’re unsure what connections etc. you’ll need for your pressure washer, please contact the company you plan on purchasing the hose reel from as they should be able to advise.
Main Channel: / @autocarehq
Website: autocarehq.com/
Instagram: / autocarehq
28 сен 2024
