Тёмный

Multiplex Blizzard - Time Lapse Build 

Bavarian RC
Подписаться 12 тыс.
Просмотров 18 тыс.
50% 1

In this video I will show you a time lapse build of the Multiplex Blizzard. The Blizzard was introduced by Multiplex more than 10 years ago as a styrofoam hotliner.
Two things I would have never expected to go together. Knowing that the Blizzard is discontinued since some years I was quite surprised to find an original kit on eBay. Maybe one of the last unbuilt Blizzards...
The build was quite straight forward and after about 12 hours the Blizzard was ready to take to the air. Enjoy the time lapse build and stay tuned for the flight video which will come soon.
Flight video of the Multiplex Blizzard: • Multiplex Blizzard Fli...
Specs:
Length: 910mm
Wingspan: 1380mm
Wing area: 19,4 dm2
All up weight: 1025g
CG: 70mm
Electronics:
Motor: Torcster Brushless Gold A3542/4-1460
Propeller: Aeronaut CAM Carbon 9,5x6
ESC: Graupner BRUSHLESS CONTROL +T 70 (70 A)
Servos: 4x Graupner DES 428 BB MG (8g - metal gear)
Battery: SLS Quantum 2200 mAh 3S 40C/80C
Cameras:
Sony HDR-CX730
Insta 360 One X
Microphone:
Rode NTUSB

Опубликовано:

 

28 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 48   
@nThanksForAllTheFish
@nThanksForAllTheFish 2 года назад
One thing I did not realize about these kits is that the decals provide a critical role in the structural stiffness of the aircraft and are not just there for decoration.
@bavarian_rc
@bavarian_rc 2 года назад
Never looked at it like that but you are certainly right!
@sbogdan1
@sbogdan1 Год назад
It's very nice looking Too bad Blizzard is no longer available The multiplex should resume production
@bavarian_rc
@bavarian_rc Год назад
Yes, I think Multiplex should either resume production or develop a version 2. I was lucky that I could find some spare parts on eBay. So in case I break something I can still repair it. The Blizzard is one of my planes that I still fly a lot.
@Rundumsfliegen
@Rundumsfliegen 3 года назад
Ui ui ui son Kollegen flieg ich auch 👍🤣
@bavarian_rc
@bavarian_rc 3 года назад
Ist einer meiner Lieblingsflieger. Hat mittlerweile leider schon 2 Crashs hinter sich, einmal hab ich ihn aus den Augen verloren, das zweite mal hat sich die Motorverschraubung gelöst ... den Motor mit zugehöriger Rumpfspitze suche ich heute noch 😂 Fliegt aber inzwischen mit 'nem Ersatzrumpf wieder. Die ganz Story gibt's zum nachlesen auf meinem Instagram Kanal bavarian.rc
@clockmakerify
@clockmakerify Год назад
Я просто у захваті, надзвичайно продумана конструкція, ніяких довгих тяг керування, а на крилах вони навіть прикриті аеродинамічними накладками.
@bavarian_rc
@bavarian_rc Год назад
Yes, the Blizzard is a great kit. It's a pitty that Multiplex stopped producing it. The Blizzard is still one of my favourite RC planes and I already have more than 150 flights ... and some "minor" crashs and repairs with it.
@DZARO
@DZARO Год назад
Believe it or not, I have the exact same cutters from KNIPEX. Best tools for the price!
@bavarian_rc
@bavarian_rc Год назад
Ha ha, that's a coincidence. I love them, they are really good quality.
@이현서-d3e
@이현서-d3e 11 месяцев назад
The sense of speed is considerable. I want to know the motor size and folding prop size.
@bavarian_rc
@bavarian_rc 11 месяцев назад
Yes this plane can go really fast 😁 The motor is a Torcster Brushless Gold A3542/4-1460. I am using an Aeronaut CAM Carbon 9,5 x 6 folding prop.
@stewartkeeble2371
@stewartkeeble2371 11 месяцев назад
Very nice,can I ask your motor set up!! 👍
@bavarian_rc
@bavarian_rc 11 месяцев назад
Thanks. My setup: Motor: Torcster Brushless Gold A3542/4-1460 Propeller: Aeronaut CAM Carbon 9,5x6
@x3mperformace
@x3mperformace Год назад
I know it's an old video. But. This looks like a really plesure to build. It looks really solid, a lot of re-enforcing in the kit, but well sorted in the light end of the scale. Beautifully engineered. And it's a sleek and fast plane. Great timelaps. 🙂
@bavarian_rc
@bavarian_rc Год назад
Hi, I am happy to see that also my older videos are still watched. The build was really quite simple and the instructions from the kit were super clear. The strength added with all the re-enforments is quite significant. The only remaining issue is that the ailerons start to flutter when going into a vertical dive with a speed roughly above 250 km/h ... but hey who needs that 😉 I am still flying the Blizzard a lot and after around 150 flights and 2 crashes with subsequent repairs I still enjoy it a lot. If you haven't already seen it, there is also a flight video of the Blizzard: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EkrB3kJKRLg.html Thanks again for your comment! Cheers!
@Flybrei
@Flybrei 4 года назад
Wieder ein schönes Bauvideo. Da fließt ganz schön Zacki rein.
@bavarian_rc
@bavarian_rc 4 года назад
Ja der gute Zacki klebt super, auch da wo er nicht soll 😜👉🤚
@blindmonkey870
@blindmonkey870 2 года назад
I wanna the Bavaria divorce with entire Germany and will become independent state in politics.
@bavarian_rc
@bavarian_rc 2 года назад
🤔🤪
@YvesWinkel
@YvesWinkel 4 года назад
Hi. Can you please tell me what kind of CA you used? And maybe a CA kicker? (Accelerator) Nice build. I've found also a new kit. I hope to put in a setup put together from HK. Best regards.
@bavarian_rc
@bavarian_rc 4 года назад
I used the CA from Multiplex that is specifically for Elapor, it is called „Zacki Elapor“. I recommend using the medium viscous one and in case of need to come back with the thin CA called „Zacki Super liquid“. Any normal CA will damage the foam! The kicker I used is „MitreBond Aerosol Activator“, but I guess any activator should work with it. And be sure to wear gloves 😜 as you can see in the video I started wearing them after glueing the first part... Enjoy the build and the flying. It‘s really a blast! Just be careful with too steep dives, it tends to flutter at high speed. My flight video will hopefully be finished soon. Greetings from Bavaria
@nicodo56
@nicodo56 3 года назад
CA kickers (accelerators) are quite unhealthy! Over the years I built quite a bunch of Multiplex foamies (Easy Star, Easy Glider, Heron, Blizzard). Always used Zacki and Zacki Super liquid - never any activator. Even after years of flying, all glued connections are in perfect condition. You cannot ask for more. Perfect match!
@juwain3
@juwain3 2 года назад
I still have 2 Blizzards kits in stock , so its not the last build ;=)
@bavarian_rc
@bavarian_rc 2 года назад
Yes, they are far from gone… I also found another one to put in stock 😜
@dennyeck9318
@dennyeck9318 3 года назад
Just bought one of these kits, your video is very helpful, Thank You!
@bavarian_rc
@bavarian_rc 3 года назад
Great that it helped. You‘ll love flying it... also check out my flight video
@Frosti4444
@Frosti4444 4 года назад
Schönes Video! Bin auf das Flugvideo gespannt! Du hast da ja immer ne super Location 👍 Schöne Grüße aus Zell am See...
@bavarian_rc
@bavarian_rc 4 года назад
Danke! Hab am Wochenende noch ein paar Flüge mit onboard Kamera gemacht. Damit hab ich jetzt genug Material fürs Flugvideo ... brauche ich nur noch Zeit zum schneiden 😜
@kev4354
@kev4354 2 года назад
Nice Video looks like a nice foamy V-tail
@bavarian_rc
@bavarian_rc 2 года назад
Thanks! I really love this plane. For a foamy it flies absolutely fanatstic 😎😁
@aamirshahzad3444
@aamirshahzad3444 2 года назад
good job brother
@bavarian_rc
@bavarian_rc 2 года назад
Thanks a lot !
@henryschubert6683
@henryschubert6683 4 года назад
Den Motor und Akku von deinem lidel fliger Projekt gibt es nicht mehr. Meine Frage ist welchen Motor und Akku man stattdessen nehmen könnte.
@bavarian_rc
@bavarian_rc 4 года назад
Den Graupner Motor von meinem Lidl Flieger gibt‘s leider nicht mehr da Graupner insolvent ist. Du kannst aber einfach einen anderen 2218 Motor mit rund 1200kv nehmen, z.B. Den Emax GT2218 / 09 1100kv oder den Flite Test Radial C. Als Akku würde ich nen 1600mAh 3S nehmen.
@henryschubert6683
@henryschubert6683 4 года назад
Ok vielen Dank.
@henryschubert6683
@henryschubert6683 4 года назад
Haben sie vielleicht auch noch einen Tipp für den esc und für einen preisgünstigen Sender
@bavarian_rc
@bavarian_rc 4 года назад
Für den Einstieg wäre als Fernsteuerung die Spectrum DX6e nicht schlecht. Als ESC würde ich was günstiges aus dem Bereich 20A nehmen... bei dem Motor Setup vom Lidl Devil fließen rund 10A. Kleine Frage: ist das Dein erster Flieger? Wenn ja dann würde ich von dem Projekt abraten... das ist was als 3. oder 4. Flieger
@henryschubert6683
@henryschubert6683 4 года назад
Bavarian RC oh ok. Ja das ist mein erster Flieger. Dachte das wäre so ganz gut da es nich ganz so teuer ist. Was könnte ich den. Stattdessen bauen.
@pallavigupta9703
@pallavigupta9703 4 года назад
Great work bro 🤜love from India🇮🇳
@bavarian_rc
@bavarian_rc 4 года назад
Thanks and greetings to India 😃👍
@elhongo6037
@elhongo6037 2 года назад
Wo fliegst du in Bayern? Bin aus Gars / Inn
@bavarian_rc
@bavarian_rc 2 года назад
Bin im Bereich Nordschwaben unterwegs.
@elhongo6037
@elhongo6037 2 года назад
@@bavarian_rc Augsburger Raum?
@bavarian_rc
@bavarian_rc 2 года назад
Etwas nördlich von Augsburg
@elhongo6037
@elhongo6037 2 года назад
@@bavarian_rc Schöne Gegend
Далее
Triple Neo Speed - Time Lapse Build
54:46
Просмотров 444 тыс.
BTD10: The 835kph Sailplane and Dynamic Soaring
56:00
Просмотров 202 тыс.
Редакция. News: 136-я неделя
45:09
Просмотров 984 тыс.
Qalpoq - Amakivachcha (hajviy ko'rsatuv)
41:44
Просмотров 303 тыс.
titan tvman's plan (skibidi toilet 77)
01:00
Просмотров 5 млн
Flite Test - FX-79 Buffalo - Build, Tune, Fly
30:47
Просмотров 184 тыс.
Venice RC Flying Wing - Time Lapse Build
37:53
Просмотров 23 тыс.
Scratch built DLG glider -Tools for bagging-
4:06
Просмотров 4,5 тыс.
Edge 540 Aerobatic RC Plane DIY build
32:27
Просмотров 688 тыс.
Lentus RR with retractable landing gear
8:35
Просмотров 10 тыс.
Shaka RC Flying Wing - Time Lapse Build
41:48
Просмотров 34 тыс.
Volantex ASW28 - yet another awesome glider... BUT...
11:32