Mustang C Pillar, rear quarter window, A pillar Trim removal. Weather stripping, fix leak

Подписаться 97 тыс.

Просмотров 3,1 тыс.

50% 1

Mustang Maintenance and repair
• Mustang Maintenance an...
A heat gun may be useful to melt some glue on the border of the glass, but be careful not to burn yourself or melt the plastic on the car. amzn.to/49MqgFl
Heat gun video • DeWalt 20V Heat Gun DC...
I am an amazon affiliate, so purchasing through the links I provide may support the channel with a small commission.

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 14

@ddellwo Месяц назад

Good to know - I plan on “vinyling” my roof at this will allow me to run the vinyl underneath the side trim for a nice, clean appearance!

@silver01mustanggt47 7 месяцев назад

Nice video thanks for being a big help in the new edge community 👍

@robertyue7017 7 месяцев назад

Nicely done, thanks for sharing.

@revolutiondance1141 6 месяцев назад

I have a Mazda cx5 that I need to replace the outside A,C, rear pillar. How much work would you say that would require? It’s all one piece I believe.

@christianibarra9438 4 месяца назад

People may not know but the Mach 1s came with different panels. That being said I wanna change mine. Would I need the Mach 1s window or just the panels?

@dannyjohnsonsgarage 4 месяца назад

It will work with the regular windows but the design won’t follow the c pillar. The mach 1 sail panels also say Bullitt on the back as they came from the design from the Bullitt

@chrisj2308 7 месяцев назад

hey danny totally opposite question. i have an 03 cobra with a ported blower , pulled , injectors etc with around 500 wheel. but i’m at around 138k miles what oil to you recommend i use ? since i am a bit on the higher side and i imagine the stock 5w-20 is a little too thin?

@dannyjohnsonsgarage 7 месяцев назад

I would do 5w30 full synthetic with the motorcraft FL-820s filter

@chrisj2308 7 месяцев назад

@@dannyjohnsonsgarage thank you , i was told by someone else to use 20w50 but well i’m not to sure the differences exactly but i do know that’s a big difference haha. why wouldn’t i want to run that? also any specific brands you recommend for that 5w-30?

@dannyjohnsonsgarage 7 месяцев назад

@@chrisj2308 some people do, but 59 weight can be so thick it sometimes won’t lubricate the rod bearings properly on startup (especially when cold). It will also cause higher oil pressure and can cause issues. Not saying it’s impossible to run and some people do, but 5w30 should be just fine

@AndrewKiss-km2pl 7 месяцев назад

Anyone have a clue what a tint job on this car costs? I've been out of the game for a while....My 99 GT's rear window tint is peeling. I'd remove myself, clean windows, and take to a shop to have new tint put on.

@dannyjohnsonsgarage 7 месяцев назад

Usually it’s about $100