No video :(

My 2020 Pelican Bass Raider 10e Scupper Drain Install - Florida Fish Hunter

Подписаться 3,4 тыс.

Просмотров 8 тыс.

50% 1

This is a mod that I implemented to my Pelican Bass Raider 10e which allows a 3d printed shim(s) to be placed inside between the upper and lower deck of the hull after drilling with the hole saw. The purpose of the shim is allow the scupper drain, after insertion, to be properly secured when tightened down by drain nut and not deform the hull surfaces..
► 3D PRINT FILES→ www.thingivers...
► DRAIN PLUG → amzn.to/2Pclehx
► DEEP CUT HOLE SAW → amzn.to/3pTowTs
► 5200 MARINE SEALANT → amzn.to/3qTfuat
► THRU-HULL DRAIN → amzn.to/2ZP5xii
► Recommended online source to have your 3d files made → craftcloud3d.com
Thanks for watching!
If you liked the video, please give it a thumbs up! If you would like to see more videos like this, please subscribe!
▬▬▬▬▬▬▬ 3D PRINTING SERVICE ▬▬▬▬▬▬▬▬
► craftcloud3d.com ( recommended )
▬▬▬▬▬▬ SHOP THE EQUIPMENT I USE! ▬▬▬▬▬▬
► Kit → kit.co/florida...
▬▬▬▬▬▬ FLORIDA FISH HUNTER LINKS ▬▬▬▬▬▬
► RU-vid → / floridafishhunter
► Facebook → / floridafishhunter
► Instagram → / floridafishhunter
► Blog → floridafishhun...
► Thingiverse → www.thingivers...
► T-Shirts → bit.ly/FFHgear
► E-Mail → floridafishhunter@gmail.com
► Patreon → / floridafishhunter
▬▬▬▬▬▬
#ffhdiy

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 40

@MrSirPhase3 Год назад

Other video's show adding the drain without the shim. Those video's looked like a disaster in the making. I wasn't comfortable doing that to my boat. Then finally I came across this video showing the use of a shim, and how to make a shim that will easily go in through the hole between the two layers and fit snug. Now feeling much more at ease with drilling that dreaded hole into the bottom of my Boat. Without a shim to stop the flexing and possible leaking I wasn't about to drill that hole. Seeing it done correctly is a game changer. Thanks for the video.

@FFHTV Год назад

I felt the same way! I could not drill a hole in the floor of my boat until I could solve that flexing situation. Thanks for watching! 😊👍

@justcallmeDiesel 2 года назад

For those wondering, I purchased the shim directly from him (not sure if he still does this) but was incredibly easy to install. One end of the shim is pointed and one is rounded. By inserting the ROUNDED end in first, simply twisting sideways the shim popped into place flawlessly. I also purchased his paddle holders. Unfortunately one accidentle run into a tree and they are done for haha

@Shorn_ Год назад

Thanks for the creative solution! I have a Field & Stream Angler, and havent drilled the hole yet so I went with 8 of the thin shims in case my boat has a bigger or smaller gap (and in case I lose 1 or 2 to the inside of the boat 😅)

@FFHTV Год назад

Glad it helped! 😊👍

@donniedickerson8077 3 года назад

I put the scupper in as well but Marine silicone and tighten to a good snugged fit ,so far no worries , marine silicone Everytjing you do ,every screw you put in the hull , I've been very limited in what I have done so far , when Rigging it out it's almost impossible to do without some penetrations but I'm keeping it as limited and using the silicone on everything , so far so good

@FFHTV 3 года назад

I agree! Use marine sealant whenever possible especially when there are screws or holes involved. 😊👍

@danielsuarezuy 2 года назад

Thank you so much for taking your time to address this common problem. Great video!

@FFHTV 2 года назад

Thanks Daniel! Glad it was helpful! 😊👍

@fishntools Год назад

Outstanding, I've always been tormented by the issue of how to fill the space between! What was the purpose of leaving so much protruding on the underside?

@FFHTV Год назад

Thanks fishntools! No reason or purpose on the amount of protrusion of the drain. 😊👍

@jamesbeal8934 2 года назад

great video.. i have wondered about the gap since I decided I needed a drain of some sort on the 10E i just bought..Others have mentioned not to tighten to much as there is a gap between top and bottom..Your video is the first to address that gap..I went to the site you mentioned to get one but at 80 yrs old the tech train has left the station without me..Is there anyway i can specify the one like you got?? I think i can manage the 5 1/8th thick ones..any help would be appreciated..have a great day...jb

@FFHTV 2 года назад

Thanks James! 😊👍 I can help you with that just contact me with details on what you are needing again at floridafishhunter.wordpress.com/contact/

@marchufnagel9068 3 года назад

Which one would you recommend, thin or thick? The thick didn't look too bad to install.

@FFHTV 3 года назад

Honestly, I would just do the thick one and get it over with. 😊👍

@hodgesmd1 Год назад

Where can u buy the shim for pelican scupper drain install?

@hehazrisen3529 25 дней назад

If you no longer sell the shims, what’s the use of this video??

@FFHTV 24 дня назад

Hi hehazrisen3529. I'm sorry you feel that way. The primary intention of the video has always been to share the idea of how I chose to do this modification including the files that I created and where you can get it made which has always been linked in the videos description.

@fishingwithjett5373 2 года назад

They have several options on the type of material. Which one do I choose?

@FFHTV 2 года назад

Hi Jett! I always go with ABS 😊👍

@fishingwithjett5373 2 года назад

@@FFHTV do you sale the shim by any chance? If not I'll have to figure out how to order them on the suggested website.

@patriciahurst4071 6 месяцев назад

Do you still make and sell shims? Very interested in in purchasing if you are.

@FFHTV 5 месяцев назад

Sadly I no longer make or sell the shims but you can get it made here ( craftcloud3d.com ) with the STL file I provided that is linked in the videos description.😊👍

@MrJustus88 3 года назад

I don’t understand why Pelican didn’t install a scupper in the first place

@FFHTV 3 года назад

For the life of me neither do I 😊👍

@sald7925 2 года назад

For the same reason they didn’t make the sides deep so you stuff doesn’t fall out Canadian manufacturing… who knows they saved a buck

@hodgesmd1 Год назад

what size is the scupper drain itseif.

@FFHTV Год назад

The inside diameter of the scupper drain that I used is 5/8".

@keepinitbassyusa 2 года назад

So do you recommend the thinner spacer or the one that you've installed?

@FFHTV 2 года назад

Hi KeepinItBassy! I prefer the thick one piece spacer. 😊👍

@dougsmith8950 3 года назад

Are you selling these spacers?

@xs750yamaha 2 года назад

Hey whats your thoughts on using a one way scupper drain.

@FFHTV 2 года назад

Not needed in my opinion. I don't even use the drain plug that I purchased for my scupper drain.

@karlross754 3 года назад

Where can I get the spacer

@FFHTV 3 года назад

Hi Karl! The link to download the file for making the shim is available in the video description and can be cheaply made using this online source: craftcloud3d.com

@patricecurtis9530 2 года назад

Instead of buying a 3 d printer how about expanding foam, redrill hole if necessary 💁

@FFHTV 2 года назад

Hi Patrice! If done correctly, expanding foam is definitely better than having nothing at all between the top and bottom of the hull floor and should work just fine in my opinion. Also, as a side note, there is no need to purchase a 3d printer these days as there are many online 3d print services available that can create the parts for you if you have the stl file such as craftcloud3d.com ( my recommendation ). 😊👍

@dougstoutenborough6461 3 года назад

Good video but loose the stupid music.

@anatoliyuntilov5715 3 года назад

I confirm that the music is dumb.

@jamesbeal8934 2 года назад

In very top left corner of this video is a little red square box..magic happens when you click on it..try it, you will be amazed...good luck, good fishin