My biggest Home Automation project using ESP32 | IoT Projects | ESP32 Projects | Ubidots | LCSC

Подписаться 130 тыс.

Просмотров 760 тыс.

50% 1

JLCPCB Prototype for $2(Any Color): jlcpcb.com
This is the tutorial video for an IoT project using which you can control upto 16 appliances over internet from anywhere in this world using most powerful ESP32 board and Ubidots MQTT server.
I have also shown the components used, it's circuit diagram and almost everything that require to make this amazing project.
Subscribe Shorts Channel for short entertaining, informative and behind the scenes content :- bit.ly/techiesms_shorts
Buy ESP32 at the cheapest Price on Internet - bit.ly/2X0zmyF
Subscribe now to watch some amazing videos coming up soon.
bit.ly/techiesms_youtube
_________________________________________________________________
For code, circuit diagram and other details - techiesms.com/iot-projects/esp...
PCB Design - easyeda.com/techiesms/16-appl...
I made this same project with Blynk as well - • 857010 IVA Ethical Hac...
_________________________________________________________________
Buy the components for your projects from official techiesms store 💡🔌
ESP32 Dev Board - www.techiesms.com/product/esp...
Relays - www.techiesms.com/product/5v-...
_________________________________________________________________
Now you can get free PCB with every order of techiesms T-shirt or techiesms pocket notebook.
You can buy the merchandise from here,
techiesms.com/merchandise/
_________________________________________________________________
Subscribe Now :- bit.ly/techiesms_youtube
Facebook :- / techiesms
Twitter :- / imtechiesms
Instagram :- / techiesms
Website :- www.techiesms.com
WhatsApp number :- +91 82000 79034
_________________________________________________________________
#techiesms
explore | learn | share

Наука

Опубликовано:

24 май 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 711

@vipul-pawar 5 лет назад

Home automation series is the best tutorial of this channel 👍😘

@techiesms 5 лет назад

Thank you so much for appreciating my work 😇

@gadgetlanka4627 4 года назад

Would you like to give me your PCB plan? If you don't mind send it to my e-mail..thankyou rmschandimal@gmail.com

@CdSekar24 3 года назад

I'm looking for a guy like u Finally found Tq sir...

@qwarlockz8017 5 лет назад

Thank you so much for this video. I am usually a software guy. But I needed a break. So working with little electronic stuff looks really fun. Thanks for the tips. I especially love the ability to create custom PCB! I might use it for an RGB LED Cube!

@rendrafams5628 3 года назад

this is what I was looking for first. thanks And continued success 👍

@ebeb9156 3 года назад

Very precice video , matched engineer and pro-hobyist audience. Short, informative, good english.... outstanding job, subscribed!

@ashishwagire1194 4 года назад

Loved it..I would love to implement this at my new house

@leoreinoso 5 лет назад

Thank you a big hug from Brazil.

@Bornforbapa 2 года назад

Sir you are doing awesome project....I want to become like you.. Also your circuit designeing skill is awesome

@chafiktaachit884 5 лет назад

Always great job

@mramgopal8487 4 года назад

very well explained and detailed . i really love it . you had made a great video.

@nater3091 5 лет назад

I would love to use this application for a water level sensor that if activated turns off the power source and then alerts the user that the sensor was triggered. I have so much I still need to learn. Thanks again for such clever ideas and explaining it in such an easy to understand way.

@abzautomations 3 года назад

Hello friend, please if you have found out how to do it can you please share it with me?

@lesmartomation487 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--jYCOD8rba4.html

@lesmartomation487 3 года назад

@@abzautomations ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--jYCOD8rba4.html

@ManojAg 3 года назад

Simplicity with professionalism ❤️

@XacretT 4 года назад

Well, just what i was thinking about. But my idea is to use triacs or mosfets (for AC or DC loads) in the form of replaceable modules (like drivers on some control boards for fdm-printers )

@DAN_CLERGYMAN 3 года назад

I'm thinking of using the relays to bridge button/switch connections on appliances instead of outlets. Thus project may have more uses than you might have thought!

@shalabyer 3 года назад

Thank you so much for this video, I just want to know what is the maximum current rating for each relay channel, i know that the relay can handle 10A, but how much can the PCB lines hold?

@sameerg 5 лет назад

Amazing.. waiting for more exciting videos of your channel.

@techiesms 5 лет назад

Hope to make more interesting project in future

@adem.toprak 3 года назад

Great work, well done. Can you add enegry monitoring to the relays? do you have such design?

@hasantariq5470 3 года назад

Great Work... Appreciated! Keep it Up!

@debasishbanerjee3600 5 лет назад

Wonderful project sachin....thnks bro

@techiesms 5 лет назад

Thank you

@michdem100 5 лет назад

Quite cool Say - have you though of using I2C pin expander to allow control of even more relays?

@AJB2K3 5 лет назад

The board looks amazing nice and thanks for sharing all the code and hardware files.

@RandomUser2401 3 года назад

this board is HIGHLY dangerous. There is NO insulation from the mains side to 5V wahtsoever and traces on the PCB getting super close. This is a very very bad design that is very dangerous to use! Do not replicate this!

@mewedward 2 года назад

@@RandomUser2401 are you pcb designer

@RandomUser2401 2 года назад

@@mewedward yes

@ngongpangjulius818 2 года назад

Good afternoon sir

@GuruNesia 2 года назад

hmm

@DevoAjit 5 лет назад

I m also working on 8 channel relay. With alexa. Hope i will complete it soon. Thanks for your video. And very clean build

@techiesms 5 лет назад

Do share with me when completed

@travelpedia6351 3 года назад

I want this product which works with alexa. Can you sell it to me. Reply 9914400388.

@RandomUser2401 3 года назад

@@travelpedia6351 clean build? this is an engineering nightmare!

@TheCndr81 Год назад

@@techiesms can you share code arduino?

@salaryunis2254 3 года назад

very nice work Sir, would love to do something similar someday.

@ighost_1337 5 лет назад

Great going bro ! If possible then make one more tutorial using Fauxmoesp library so Alexa users can control it using voice

@pokpikchan 2 года назад

Thanx for sharing. The pcb looks super neat

@gthanjavur Год назад

I got what i was looking for, thank you

@electronicsinnovation 5 лет назад

The excellent project with the Real-time application with ready to deploy model...

@gungunmaurya7957 3 года назад

Sir pls reply me if I use ttp223 touch sensor instead of normal switches will it work? and while using ttp223 I want to use just "up and down" buttons for speed control for fan with same circuit which you have mentioned as it is best non humming kit for fan ,if possible pls send me the coding+circuit diagram for my dream project . I'll be very great full to you

@yashmogannavar8056 5 лет назад

Can we have a video on fully explained OTA with nodeMCU?? I'm not getting perfect videos or docs for OTA. It will be great if you do that...

@dineshk6449 5 лет назад

I really liked this project ❤️

@techiesms 5 лет назад

Thanks

@oskarolausson 3 года назад

Great vid! Nice project

@yuvaraj2485 5 лет назад

I like this project so much 😊

@MrKen59 3 года назад

Great job. Thanks for sharing this 😌

@aadhikarianish 5 лет назад

Awesome video. Can you please also make a video on NRF24L01 wireless communication?

@bagusramadhan8724 4 года назад

Hey, can the PCB that you design use for my NodeMCU V3 ? i dont know how to design pcb

@mesquitamk1681 3 года назад

Very cool your project friend I made one for myself and I'm using 13 equipment but I have a problem with power failure and I wanted to save the status of the pins. Would you have a video explaining how to configure this card? Thank you very much in advance

@midsummerstation3345 4 года назад

I can't find the doit esp32 dev board in the easyEDA editing tool. Did you build it manually using multiple components?

@ParagOak 5 лет назад

This is amazing, Soon I will be ordering t-shirt and pcb board from website. Just wanted to know how to how can we integrate this with “Apple Home kit”? Thanks for sharing

@jugengawande3789 5 лет назад

You will need a raspberry pie to act like hub with a mqtt server running. There is a HomeKit emulator for raspbian available that let’s you add/control non HomeKit supported devices to HomeKit naturally.

@ParagOak 5 лет назад

Jugen Gawande ohh cool , can share any guide or link about this?

@jugengawande3789 5 лет назад

Parag Oak I did this project a long back and did not document it anyway. But the app you need on your raspberry pi is called HomeBridge. If you google/RU-vid that you will find tons of videos about setting it up and for communicating with your esp8266 like in this video you will need a mqtt broker on the raspberry the app is called mosquito with tons of videos available for that. After that it’s only tinkering some code. To make it work. In reference to above video the circuitry for relays and module can remain same only the esp8266 will have to communicate with a mqtt broker running on a raspberry pi on the same network.

@johnnystamboel7745 2 года назад

Hi. I love this project and I wanted to order this PCB but i saw there were about 35 errors when i do DRC check. Can i order it like that and will it work correctly. Thanks.

@s.husain6125 5 лет назад

Hello sir i am following you from years... Please make tutorial on lora communication and use of lora module with esp 32..thanx

@electronic7979 5 лет назад

Very nice project 👍 Excellent

@techiesms 5 лет назад

Thanks

@krakatoa1987 4 года назад

Hi, this is a great channel RU-vid recently discovered for me haha, thanks for the work on bringing it to us. I have a silly question, is it dangerous or do you need some kind of extra protection around the high voltage routes on your PCB? Could you provide some guidance on how to design them please?

@MrDomingo55 4 года назад

I would avoid using this with high voltages. Design does not provide for any extra HV isolation and there are no opto isolators either. You can use this design and extend it. Alternative is, design your own base board designed to mount the ESP32 as shown here and two 8 relay modules you can find on ebay. Essentially your base board will be a 'mother board' that carries the ESP32 and two 8 relay modules. Provide for additional circuitry if necessary, produce PCB and you are good to go.

@mikeymasi 3 года назад

Yes brother this is a solid project

@AkashJadhavIT 3 года назад

great tutorial, but before starting I have one question, in My project I need to connect 1. 10 Small LED RGB White 5V (Planning to use PCA9685) 2. 2 DC motors 6v or 12v (Planning to use L298N) 3. 4 Stepper motor SG90 9gm ((Planning to use 2nd PCA9685) 4. Control over WIFI/Bluetooth, by Android app(which I can develop) 5. 1 Speaker with MicoSD mp3 audio in it (MAX98357A/SD car reader) Can I use ESP32 for these all or do I have to buy other chips as well ?

@meeskees4227 3 месяца назад

If you can use arduino for it, it will work even better with esp32 because its faster and better specs. It does have a 3.3v output instead of 5v and it can only supply like 30ma instead of the like 80ma of the arduino so u might need the uln2803 chip that is a 8bit transistor array.

@marcoboot18 3 года назад

propably a stupid question perhaps, but wouln't it be better to turn the relays 180 degree? now you have the relays output circuit only mm away from the driving circuit.

@aroznow1040 4 года назад

Sir, i have all the components and this same pcb Can you make a code for Blink Iot with this circuit ... Help me sir

@PRADYUTROY211 5 лет назад

@techiesms Hi ... Is the ubidots server access free of cost or chargeable ???

@mylanthony 5 лет назад

I wonder if you PCB is safe to use for 220V -(240V) and at what load. I can see that your low power lines on the PCB are pretty close to the high power ones. I'm concerned getting a leakage and PCB burn. Also there isnt a single fuse on your PCB. So while it looks neat, I cant believe its safe...

@AlexLPD 5 лет назад

Hi, very nice proyect, I just wanto to add the relays dont have the necessary insulation and electric shielding for this to work properly, a single diode is less than suficient, I would like suggest the use; An insulated ouput, like the diigtal pin to a UNL2003 to avoid vcc peaks, and then a of a snubber and a varistor on each relay output. For the sake of the electronics. Good work !

@mewedward 2 года назад

5 volt relay how peak come

@girieshchakaravarthy5239 3 года назад

Nice work.. Will try

@AmazingMj07 5 лет назад

Can we make mobile application for that...? With MIT app inventor

@JamilKhan-hk1wl 5 лет назад

Fairly easy for android, but not ios

@midsummerstation3345 4 года назад

why did you put a transistor in between the relay and the io pin? You could have just connected directly to the relay input (I'm from software background so I'm bit confused)

@Urbanescape21 3 года назад

What if power cuts off and comes back will it start from where it left or reset? . Is there Eprom?

@rushikeshsagar357 5 лет назад

I would like to operate appliances with both electrical switchs and this relay ? what should we do?

@RohitSharma-ih8ki Год назад

Welli love your video it is great and very informative to all

@burhanuddin8166 4 года назад

What if main current goes off.. Will it recognise nd keep those appliance on which where on before the current went off....??

@sunnygillella3707 4 года назад

Hi, please answer my question. What if the wifi password is changed? Do we have to change it in the code and upload it everytime? In that case wouldn't it be a flaw?

@juanignacioalvarez3390 3 года назад

thank you so much!

@sandeepbhandari8452 3 года назад

if internet is down so we will be needing a manual switch, and what we can do to avoid short between these connection when the internet comes back online

@alimuntaha7163 4 года назад

thanks.. auto subcribe :-)

@michaelzajac5284 2 года назад

Did you use the XOD programming?

@rohanprabhulkar3512 3 года назад

can you please give us a brief explanation of how-to and where to connect from starting A from Z

@herbertderbler1344 5 лет назад

Bro! Your English is actually very good! As a natural speaker i can say I'm very impressed by your pronunciation, good job! Subscribed!

@xcruell 5 лет назад

this comment smells.. fresh account, zero everything.. just saying ;)

@herbertderbler1344 5 лет назад

Probably a Russian bot

@vickyghost90 3 года назад

Great information on your channel thanks form pakistan

@santanusen9476 5 лет назад

can you make a video on establishing a feedback system to get real time feeds from my loads over iot. may be a current sensor as ACR712... i want to get real time status on Google assistant. can you help me out sir?

@SB-qm5wg 5 лет назад

Very cool!

@assemdvr1881 4 года назад

Very nice job. But can i add RF receiver or buttuns input to manual controle switches if there is no internet? Thank you :)

@ajithsdevadiga1603 5 лет назад

Cool project🤘

@TheNCGardener 3 года назад

the easyeda program list incomplete circuits. Is this board working/completed? I would like to order one if it works. Do you have the BOM?

@mohammadsaqib5385 5 лет назад

Sir excellent video 👌..but how can we also make the regular switches also to work with it

@mohsannaeem1928 5 лет назад

I also want to know how regular switches also to work with it ?????

@krishnawa_ 5 лет назад

Simple and awesome

@RanaFaisal-xt5mg 4 года назад

Good one, I like it.

@aldoseba 3 года назад

Can you explain how to connect an u-blox GPS RTK module to arduino? Step by step please. That module is very accurate, up to few cm.

@marcomontoyameza1472 4 года назад

Hello everyone . Can this circuit be used to control an electrical circuit of a home? Do you think it's safe? . I will change the relays for others of greater amperage capacity but I want to be sure that the design is used for a home electrical network. Thank you

@IndependentRepair Год назад

Best explanation way

@siddharthtutorials4617 2 года назад

Sir it would be great if esp 32 plc and touch sensor based project is made for 50 relays. (full home automation)

@Bhaaskarrajan 4 года назад

Nice and clear explanation

@_saumyaparkashKhandai_B 3 года назад

Amazing ist channel to explain deeply

@rishabhshah8845 5 лет назад

Awesome video 👍👍

@rc5820 4 года назад

Sir Please make a TTGO-T-CALL Home automation project with 16 Relay

@jitendrasuthar1760 4 года назад

My esp32 is connect and disconnect continues to wifi so what i do. When i turn off hotspot than beeping 3 time but some time beep and some time stop.

@TUKCIDOTech 3 года назад

I have one question Why my node mcu esp8266mod is geeting very hot and spark when i connect it with my laptop through usb cable? Because of high voltage supply? If yes then what should i do? Plzz help me🙏

@johnbenniel6251 5 лет назад

Awesome bro

@bulususaikaushik134 2 года назад

The pcb design u uploaded in easyeda...it is showing that some links are connected can u please help me out in that!!

@kotobukichannel4367 5 лет назад

You should use solid state relay, because an ordinary relay can wield on contact which may cause problem

@Elfnetdesigns 5 лет назад

that's a one off but definitely a possible thing in places like India where people over load circuits all the time and have zero regards for safety.

@user-gq4nu8sl3w 5 лет назад

Los módulo replay de Arduino traen el transistor incluidos?

@HeiderZapata 5 лет назад

Hi from Colombia. This is a really great job. Congratulations! I have a question. Do I must pay for using Ubidots? I opened an account an said it is a 30 days trial. Thanks for your help Continue being the best! Bye

@krishnasoni6057 5 лет назад

how to use node mcu with multiple clients i.e. from more than 1 smart phine

@shivpawar135 Год назад

Just search how to use node MCU using URL and use URL in multiple phones make a different app for it.

@chinmaydeshpande4910 3 года назад

Would you please add a new connection in it for controlling fan speed also

@matinpak2078 3 года назад

Thank u for sharing♥️

@jonathan-._.- 3 года назад

i just recently also did a similar project with esp32 commponents where I redirected my door bell directly to my smartphone - still havent figured out how to not have my light switch for the kitchen trigger the bell tho ;(