I installed a double din and speakers in my 1996 recently and your vids were very helpful. I will be installing a backup camera soon so if you did record any of that or if you have any advice on routing or where to connect to the backup light and ground that would be helpful. I didn't cut/bend my rear 6x9s - I just used one screw hole through and oversize washers pinching the edge for the other three. seems to work. I thought about doing what you did but I was too squeamish. I've already routed the camera wires to the head unit so I just need to hook up in the back bucket area.
I drilled a hole as far up in the back of the bucket to run the camera wire through to the back of the car. I just routed it along the fuel line. I used black RTV to seal up the hole where I’ve drilled to put the cable through.
@@yeller95vette - thank you. I was hoping to not make any permanent changes to my car - leave no trace. I'm not sure why, it's not a rare collector's car or anything.
Get some adapters for 6" woofers...much better performance than old school 6x9 😊that shape is not a good design...i think it was fit over function for the automotive environment
😂 i’m old-school, so the six by nines are fine for me! But I agree I’m sure the 6 inch round would be a better sound but these sound pretty darn good for my half deaf ears.
