My Favourite 10 DIY Tips & Tricks

Подписаться 341 тыс.

Просмотров 611 тыс.

50% 1

After many years of picking up tips from all kinds of places here is my top 10(ish) Useful DIY 'Tips & Tricks'.
🧰 The tools and equipment I use: www.amazon.co.uk/shop/properdiy
Proper DIY Patreon Page: / properdiy
How to Fit Roller Blinds Video: • How to Fit Roller Blinds
Amazon links to the products in this video...
► Ultra Grime Wipes: amzn.to/45xpA5d
► 3M CLAW Picture Hangers: amzn.to/3Z2X1d9
The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do. As an Amazon Associate I earn from qualifying purchases.

Хобби

Опубликовано:

4 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 241

@3sons587 9 месяцев назад

And i was sitting here feeling smug that I knew all this UNTIL YOU BLEW MY MIND with the picture frames 🤣

@windspoint 9 месяцев назад

LOL blew my mind as well with the picture frames!!!

@b-dogswings8019 8 месяцев назад

Me too!

@lauriemacquanan2141 8 месяцев назад

Picture frame trick for some ppl!!! Would be to use a forks tines on the hook then slide the wire between the wall and the fork. The fork guides the wire onto the hook. Then remove the fork.

@simonhinson9367 9 месяцев назад

Surly the best tip is to watch all of your videos and you will not go far wrong. Everything you show is very easy to follow and well explained with added humour. Kids would excel at school a lot more if teachers took a leaf out of your book.

@JIMMYH2011 9 месяцев назад

Stuart, you should be on the BBC. Great tips, great presenter and great editing.

@nickm8494 9 месяцев назад

Some great tips for the DIYer, Stuart. As a pro carpenter and cabinet maker I do a lot of measuring and have found a couple of things that work for me. Firstly I always have a folding carpenter's rule for measuring/marking along flat surfaces. I find it much easier than the 100mm method, plus it's useful for measuring in from walls, inside cabinets etc. For measuring between walls, cabinet side panels, reveals etc, I just use a laser measure, even for short distances. Offer it up and press the button, job done. With "trapped ends" eg skirting or batten between walls, it's always good practice to overcut the length you're fitting by a few mm then nibble it on the chop saw to shoot it in. Last tip: the rubber grips on those Stanley tapes can be used as pencil erasers!

@petegibbins9073 9 месяцев назад

Good stuff as usual one tip I was given when starting woodworking was when using a square to draw a line place the pencil on the mark you made when measuring where you wanted the line and slide the square up to the pencil that way the line you draw will be on the measurement you made. Hope that made sense! That’s why we like RU-vid as a picture says a thousand words!!

@antonioherrera1324 3 месяца назад

Man why does that actually makes a lot more sense

@boredirishguy 9 месяцев назад

That string line tip is an absolute game changer. I used it today putting in some fence posts

@antonioherrera1324 3 месяца назад

Idk if I can explain it good but let's say you can't use any stakes and have a block wall or something you can put in a screw, you take ur line, pull it to where ur figure would be tight enough, if you have someone else pull it too makes it slot easier, where u calculated the line can reach the screw, make a loop(without pulling the line) you put ur finger on it and turn the loop like 6 times usually not less, you pull the line, it has to be tight you put the loop into the screw and pull the end of the line before the loop in on the screw and u pull the rest of the line, that keeps going past the screw and then you slowly let go, the loop tights on the line and it's easy to undo, just pull the right line and pull the loose line towards you out of the screw, it's better if someone helps cuz sometimes the tighter you want it the harder it's to pull the loop into the screw, idk if that makes any sense lol

@markhannan4712 9 месяцев назад

Great tips as always . I’ve cut blinds using my mitre saw and I put tape around the end I was cutting and got a really neat cut

@MarkartStudio 9 месяцев назад

Great vid as usual Stuart - down to earth, mixed with an occasional quirky look to camera, solid no faff tips, in fact proper DIY. I wonder how many 'innocent' good folk who just want a quality presentation have had to suffer the total incoherent waffle of silly nonsense BS DIY...loads, including me! My warm thanks.

@jayyambrovich3740 3 месяца назад

When I need to mark a location for screws or fixings on a "finish surface" (such as a wall, a floor or a work surface), I put down a piece of painters tape and make the mark on the tape. I then make a dimple with a nail / center punch (or put a drill on the mark and run it in REVERSE) to start it. Once you have your hole, carefully remove the tape (so it doesn't lift the paint off of the wall etc.) and there you are!!

@Quaker521 9 месяцев назад

Great tips Stuart. I always keep a roll of cling film handy for wrapping brushes, etc if I'm not cleaning them straight away.

@ewanp1396 9 месяцев назад

Was going to post the same thing!

@AncoraImparoPiper 8 месяцев назад

Yes, same :)

@fabianmckenna8197 6 месяцев назад

Agreed...... i pop them in the fridge for overnight but for longer storage, you can also wrap them and stick them in the freezer which keeps them as fresh as when you stopped painting after defrosting of course! Always check with the wife so she doesn't bin unidentifiable frozen food.😅

@chrisbradshaw7273 9 месяцев назад

The trouble with drilling into plasterboard with brad point bits is that they are very sharp. If you hit a wire or a pipe there's a good chance that you will damage them. Masonry bits are quite blunt so there's much less chance of damaging anything behind the plasterboard that you don't want to hit.

@paulwilkin5540 9 месяцев назад

Brilliant as always. Having always being an enthusiastic DIYer, I have learnt some really useful tips and tricks. The one thing that I have learnt which stands out most is that I have now become really fussy about the end product and have learnt that there is only ever one absolutely correct way to get a great project finish. This is extremely satisfying.

@saltydawg5489 6 месяцев назад

i like your tips.. but mine for hanging artwork is to put a small nail through a paint stick and put your artwork on that nail then hold the paintstick with nail against the wall and when its where you want it take the art off and press the nail into the wall to mark the spot no measuring

@andyc972 9 месяцев назад

Thanks Stuart, the string line is easily the best tip here, use it all the time now, most of the others I've heard of, or have worked out myself over the decades, wish I could have found them all in one place like this way back then !

@user-hs7xo2hw5w 9 месяцев назад

For the paint roller or paint brush trick, I wrap in cling film which works really well. I also use this on a bucket of wallpaper paste if I have to continue the next day.

@YAWN.... 9 месяцев назад

Aww, how cutesy wutesy...

@compunurse 9 месяцев назад

Old dog here. I have learned a new trick. Actually a couple. Thank you. Woof.

@knotdavewalker 2 месяца назад

I'm a landlord, and all your tips cover what I am doing on a regular basis, you have either helped me to achieve a better job or save time, especially the blinds. I think I will buy a cheap blind just to try it. Thanks

@mikeg8335 9 месяцев назад

Excellent video. Informative, no hype, no waffle. In my opinion you're the best DIY RU-vidr.

@buonafortuna8928 9 месяцев назад

Nice one Stu. An idea for your channel: Get people to contribute to a wishlist of items they'd like you to cover - if enough people request it, you know it will be popular before you make it - my current hobbyhorse repairing cracks in concrete oaths and drives.

@LiqdPT 9 месяцев назад

3:00 frequently the body of the tape measure is a certain size, and it's marked on the casing. So you can put the end of the tape in one corner and just pull the tape until the back of the body is against the other corner. Now just add the size of the body to your measurement.

@saveriog.825 9 месяцев назад

True, but frequently that size is an odd number, plus it's not easy to read the exact measure at the "mouth" of the tape body. I find easier and more accurate to use the 2 steps method.

@LiqdPT 9 месяцев назад

@@saveriog.825 my favorite tape has a 3" body, so that's easy to add

@saveriog.825 9 месяцев назад

@@LiqdPT you are lucky! All the metric tapes I've had had measures like 76mm or 83mm... Not easy to deal with! Maybe tape's bodies are designed in imperial units!

@kaybee5150 8 месяцев назад

Luved the tying off the string. It is so simple.

@RedShift00 9 месяцев назад

Just found your channel this AM, outstanding format, explanations, speed, and subjects. I've been woodworking for over a decade and have always been underwhelmed with woodworking DIY videos. You've knocked it out of sight. Off to start from video #1! Thanks from the US.

@mikeZL3XD7029 9 месяцев назад

Hi Stuart, Thanks for these, I really like that string-line trick, I've struggled with untying them for years.

@AncoraImparoPiper 8 месяцев назад

Thank you for these tips. They have helped me with so many issues I've been struggling with. The struggle is over.

@macklyn 8 месяцев назад

The picture hanging trick is golden, thanks!

@lowwatthalo1654 9 месяцев назад

Another tip for the paint tray is to line it with tin-foil, then when the job is complete, just chuck it in the bin & there should be almost no cleaning to do.

@c.a.g.1977 9 месяцев назад

Great tips, Stuart! Especially that on about hanging two frames on the same level!

@JW-rj6cv 9 месяцев назад

"If I just un-loosen this" so tighten it then? Lots of great tips and tricks. Very handy. Thank you.

@anwolfs9804 9 месяцев назад

I really liked all of them, but especially the one where you center the hinges. If you can move it left and right for a few mm, I imagine you can also do that up and down? Could come in handy! Thanks Stuart!

@Tradeinspector1992 8 месяцев назад

Love all your tips Stuart. Agree with another comment you should be on national TV sharing your DIY skills

@tkfmmaxi 8 месяцев назад

I,m just about to start my 1st cottage renovation and your videos are invalubale!

@KevinBower-gy5be 9 месяцев назад

100% best way to measure internals = Gator Tape. Total game-changer for me after 36 years on the tools. Only found it by accident, whilst fitting a kitchen for a lady who made curtains and blinds.

@clemmcguinness1087 2 месяца назад

Nice one

@jan-reiniervoute6701 9 месяцев назад

Clear and helpful. Subscribed. 'Unloosen the screw' and a laugh too, splendid.

@keitho77 9 месяцев назад

I love a DIY hack. And we got 10!!! (and maybe a couple extra) Thanks Stuart!

@petert5680 8 дней назад

Great job - additional idea - cap the timber fixing to the house with lead or other water proof material to throw water of the end grain.

@3sons587 9 месяцев назад

Angle your drill tip to the centre works when you drill SDS into masonry. It’s very easy for a drill to jump away from your mark

@jayseabie215 9 месяцев назад

8:57 If your window gap (recess) is 500mm your blind needs to be 480mm to allow for the brackets. Always have a 10mm gap each side.

@cannontrodder 8 месяцев назад

All these go in the back of the mind and pop out mid-diy in the future. I’ve used loads of your others and these are excellent too!!

@graemeadamson7272 9 месяцев назад

Brilliant , always good to learn new tricks . I use the 100mm on the tape a lot , I am going to use the circular saw blade guide measurement , that will be very handy . All good as usual , cheers 👊

@Chardonbois 8 месяцев назад

Really practical videos, professionally made and delivered with a very engaging style. Despite being a fairly experienced DIYer I like learning new tricks and learn something useful from all of your videos!

@LykleSchepers 8 месяцев назад

Thank you sir! That string trick! Love it. That is going to save me so much time.

@rattylol 5 месяцев назад

For measuring inside a gap the tape has a measurement stamped on it which is the length of the actual tape case, so you can lay the full tape, plastic and metal inside the gap then take the measurement you see and add the stamped number to it, mine is 77mm. Love the hinge one

@websurfer1585 8 месяцев назад

Great tips, with the picture hanging tip, I'd alter the strings to get each picture level.

@ianpearse4480 9 месяцев назад

Nice, like the string thingy.

@sdovhfunlahsvisegbakshfjbs4621 9 месяцев назад

Thanks for legitimizing my fumbling around the center hole, works really well indeed😅.

@edmal2603 Месяц назад

Greetings from across the pond. Great tips will definitely use the hinge centering it's an epiphany

@shaun30-3-mg9zs 9 месяцев назад

Hi Stuart , Great tip's Mate, my tip is keep on learning. As well as giving out advice I always take advice good video take care👍

@garulusglandarius6126 9 месяцев назад

Excellent tips and excellent video as always Stuart. Thank you 👍

@john_2730 9 месяцев назад

That blind adjustment is a landlord special 😂😂 string line tip was good though. I can stop using tiewraps now

@crazykittenvideos855 9 месяцев назад

I’m off to write two numbers on my circular saw!!! Great tips!!

@htch207 9 месяцев назад

Some brilliant tips here. Thank you!! 😊

@robanderson240971 9 месяцев назад

I use a fine tooth hack saw for blinds and cut it in a mitre jig, that way you get less frayed edges.

@GaryThomsonJoinery 5 месяцев назад

Thank you sir, I like the picture hanging one, I knew the rest but you’re right, we always learn something. Binge watching your vids tonight 👍

@ruaraidhmcdonald-walker9524 9 месяцев назад

Brilliant!! Really useful. Thanks Stuart. There’s a book in all this you know…..

@benjamjarmin Месяц назад

This is my second year coming back to DIY. I've moved into a right state of a place. Thankyou mate, save a young man a few hours

@amandahunter4034 8 месяцев назад

A useful video, and I'll definitely be using the hole centering tip because that's one of my 'bug bears'. It's best not to use wet wipes though because they are made from plastics and are bad for the environment. A small splodge of cooking oil and a teaspoon of sugar and 'wash' your hands well with it, then with soap / washing up liquid and you quickly end up with paint-free hands that are nice and soft too! Plus, 'free' as already in the house and environmentally friendly.

@mattjones708 9 месяцев назад

Stuart.....you really are a living legend mate 👍

@thabisodube 9 месяцев назад

Perfect tips as always 😊

@JohnJones-wo1bc 9 месяцев назад

Brilliant! Thank you!

@marianneporter489 8 месяцев назад

Very helpful as always. You give us hope for a good, clean job.

@59CommandoLee 9 месяцев назад

As per usual, great videos, great fun, AND the last top tip on this video was new to me, so thanks as usual. Keep doing what you do!👍

@chapender6476 5 месяцев назад

Excellent tips, thanks

@thetruth6693 9 месяцев назад

Absolutely love this channel mate 👌👌👌

@tamkin007 9 месяцев назад

I always put a sheet of plastic over an open paint pot before pushing the lid back on. The paint lasts for ages

@mf8779 8 месяцев назад

Thanks for everything. As a beginner DIY'r, it'd be really interesting for your to provide your suggestions on what the most baseline tools are that everyone should have and what types of jobs persons might use them for. Also, it'd also be interesting to do something on mobile air compressors and the type specs you'd need and want for the various pneumatic tools, sprayers etc. available. You could then also speak to what types of jobs persons might use the various tools, sprayers etc. and their advantages, limitations etc. Cheers !

@allanbailey5179 9 месяцев назад

Brilliant as always.

@Viken43 9 месяцев назад

Been a long time viewer and really enjoy your videos....Subscribed....

@cglees 9 месяцев назад

Thank you. I consider myself old and wise but even I learned several things from your video 😊

@nimiboid 8 месяцев назад

Respect. I really liked the last one, with the paintings; will use soon. Wish you all the best.

@Vonfluff 8 месяцев назад

That was absolutely superb - thank you!

@gudgengrebe Месяц назад

That was really good, thank you 👍

@johnmatchett3548 3 месяца назад

My old dad was a Rolls Royce engineer with OCD. Hanging pictures level was a constant nightmare of measuring. What I have learned is to get the things on the wall somewhere close, putting the fixings in very lightly. Measure the error - say it's 2.5 mm high - take the pin out, move it down 2.5 mm. Perfect: time for tea and biscuits!

@granbyboy026 6 месяцев назад

Great tips. Thanks

@morganbryan8045 Месяц назад

Thank you so much for a bunch of useful tips. I probably only knew 2 of those but think I will be using every single one in the next 12 months :-) Keep up the excellent work!

@howardgregory3888 9 месяцев назад

Congrats on 250k subscribers. Keep up the good work.

@susanburns1442 4 месяца назад

Great information. I loved it, but what were those fixings you used for the picture frames? You said something about claws. Have you got a link to them

@qormi1000 8 месяцев назад

Excellent lot of tips. Thank you.

@bobnicholls 2 месяца назад

Fantastic tips, thanks.👍

@lindawinn2568 6 месяцев назад

Just like that!! Flippin brilliant. Thanks for sharing some great tips.

@LeeBottomley 8 месяцев назад

You’re video is excellent. Well presented, with no waffle. You’re knowledge and tips are highly beneficial and I’ll certainly be using them. I’ve just subscribed to your channel 👍

@no_short_circuit 9 месяцев назад

Hi Stuart, thanks for the video. Do you have a tip for fixing plastic Wiska boxes to roughcast walls so the hoels at each corner line up when drilled?

@henryrossouw930 9 месяцев назад

Like them all but the string tying up is best.

@johnchincotta1qwdb15 9 месяцев назад

Hi stewart,nice tips and tricks for all DI yers!!

@bill8784 9 месяцев назад

Good tips. Thanks as always.

@gregc7699 8 месяцев назад

Great tips 👍 love watching your videos so informative

@coop66kc 9 месяцев назад

I am a blind fitter we use a recess tape from Stanley can get your measurements mm perfect especially if measuring for shutters. Screwfix sell them.

@pikifrino 7 месяцев назад

Very good, thank you

@PaulBakewell 9 месяцев назад

Wow 1/4M subs, well done Stuart!

@lauriemacquanan2141 8 месяцев назад

Hi there great video! I loved the one abt centering the off centre hole,AND the inside measure truck. I wish I saw this video 2 weeks ago! Now how do i tell the boss this trick?? Aw yes ask if theyve seen YOUR 10 tricks!!

@bluej5455 8 месяцев назад

Awesome video. Thanks for all the great tips.

@__Timo__ 6 месяцев назад

For that top alignment tip an additional tip: Just extend the desired line with a spirit level - no need for measuring. See 16:06, the lines are same. That string tip was nice, too. I mostly tack the loose bit under the strengthened one by pulling, it is a little more secure.

@garethwatson9675 9 месяцев назад

I picked up a few tips from your video, well done great video 👍

@paulthorpe9745 5 месяцев назад

Thanks Stuart, for loads of ideas and tips, looking forward to 2024. All the very best for the new year

@maxv77 9 месяцев назад

Just got my pk of power scrub after your recommendation. Must admit. Very good 👍

@happychappy2b252 9 месяцев назад

I'm pretty sure I've seen blinds with a core made of a thin steel metal tube..... Check carefully before using your mute see..... That's my tip for the day.

@stanimir4197 9 месяцев назад

carbide should go through it (unless hardened, or stainless)

@marks-0-0 9 месяцев назад

I learnt a few new tricks there thanks. I can possibly improve on the circular saw offset tip. Instead off just knowing what measurement to allow for the baseplate, cut a thin piece of timber to use as a gauge when marking your work.

@ProperDIY 9 месяцев назад

Now that is a great tip - always learning!

@DavidLee605 9 месяцев назад

brilliant, thank you.

@thedj5914 9 месяцев назад

Great tips 👍 the 1 with the measuring tape though, the tape should tell you on the bottom what the exact distance is so you just put the tape flush on 1 end and + on what it says 😊