My first experience with milling Aluminium on a CNC 6040 Router

Подписаться 19 тыс.

Просмотров 456 тыс.

50% 1

In this video I’ll take you through my first experience with milling Aluminium on my CNC 6040 Router. I’ve broke some tools, burned some aluminium and finally got things working pretty well.
...
Six low budget end mills for aluminium:
Affiliate links:
Tool 1: ⅛ inch 2 flute: bit.ly/2N2DyEE
Tool 2: 4 mm 3 flute: bit.ly/2N2DPXZ
Tool 3: 5 mm 3 flute: bit.ly/2N2DPXZ
Tool 4: 4 mm 2 flute: bit.ly/2N1KYb2
Tool 5: 4 mm 2 flute: bit.ly/2SxnT6g
Tool 6: 6 mm 2 flute chamfer: bit.ly/2tmihfX
Test video with Feeds and Speeds: • Perfect beginner end m...
...
I waited with cutting aluminium on my CNC 6040 Router for my new low noise compressor and a cheap eaby mist coolant system to arrive. Aluminium is a soft metal (compared to steel/stainless) and when you generate to much heat while cutting, the aluminium start to stick on your end mill. Blowing small drops of lubricant on your end mill will dramatically help to lower the friction, and the generated heat. The the airstream helps to evacuate chips so you don’t recut them. The cheap Ebay mist cooling system worked pretty well. Because I didn’t had a suitable lubricant I filled the mist system up with water. I experiment with manually spraying some WD40 on the cuts. This works well. You can hear the cutting sound changing just after spraying the WD40 on cut.
When the mist coolant system was mounted on the CNC 6040 Router is was time to do the first Aluminium milling. The local hardware store only had one type of aluminium and they didn’t knew what kind of alloy it was. So after breaking the first super cheap cutter on the material I decided to order some new material to know for sure that it was suitable for milling.
When package was arrived I did 17 cuts with different feeds and speeds. All the cheap end mills I tried(expect one) performed poor. They were all 4 flute cutters. The 1 dollar 3 flute cutter did the best of them all.
After I was done testing it was finally time to do the real workpiece. I used the 5 dollar cutter and them performance difference was huge. Although the end mill was a little to long for this job, It made a good cut with perfect chip evacuation and the axial surface finish was pretty good for a first try. Because of several reasons the radial surface finish turned out pretty bad, enough to improve on that point.
In the end I’m happy with the result of this project. I learned a lot about the CNC 6040 Router in the process and with some more upgrades, high quality cutters and some more practise I think the result will be much better.
Affiliate links to the end mills:
Tool 1: ⅛ inch 2 flute: bit.ly/2N2DyEE
Tool 2: 4 mm 3 flute: bit.ly/2N2DPXZ
Tool 3: 5 mm 3 flute: bit.ly/2N2DPXZ
Tool 4: 4 mm 2 flute: bit.ly/2N1KYb2
Tool 5: 4 mm 2 flute: bit.ly/2SxnT6g
Tool 6: 6 mm 2 flute chamfer: bit.ly/2tmihfX
......
Music
First track
Cold Funk - Funkorama by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
Music promoted by Audio Library • Cold Funk - Kevin MacL...
Second track
Parasail - Silent Partner: • Parasail - Silent Part...
Third track
Jazzaddict's Intro by Cosimo Fogg (201) / cosimo-fogg
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
creativecommons.org/licenses/b...
Music promoted by Audio Library • Jazzaddict's Intro - C...

Опубликовано:

26 фев 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 297

@MBcreates 5 лет назад

Six beginner/low budget end mills for aluminium(Affiliate links): Test video with Feeds and Speeds: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-M-1dYJWh3rw.html Tool 1: ⅛ inch 2 flute: bit.ly/2N2DyEE Tool 2: 4 mm 3 flute: bit.ly/2N2DPXZ Tool 3: 5 mm 3 flute: bit.ly/2N2DPXZ Tool 4: 4 mm 2 flute: bit.ly/2N1KYb2 Tool 5: 4 mm 2 flute: bit.ly/2SxnT6g Tool 6: 6 mm 2 flute chamfer: bit.ly/2tmihfX

@ryankraft9897 5 лет назад

I wouldnt recommend AlTiN for aluminum. Stick to ZRN. The alumimum in the coating will bond with the aluminum piece

@jamestiberious1372 5 лет назад

The speed and feed your using is creating alot of backlash. Also if your getting vibration, reduce your spindle speed rpm not feed rate. I'll send a formula for working out speed and feeds. Some great speed and feeds for Ali Spot drilling S-3000 F-150 Normally go -2mm from Z0 Normal drilling S-3000 F-300 Peck 2mm ( will clear all swarf) Tapping Ali only - S300 for feed rate X by pitch. Example 12x1.75 S-300 F-525. To get really nice finishes your gonna want to do ruff and finish passes. The reason you had and ok finish is you was tracoydal cutting. Which will required a slower spindle speed but faster feed rates and small step over. If you was to do the ( ruffing ) in 0.5mm step down then a finishing pass at full depth. You should also get a nicer finish. Sorry to go on but hope this helps. And questions feel free to PM me Btw I work on Hurco VTXU 5axis CNC

@muntee33 4 года назад

James Tiberious Trawlin through YT looking for beginners advice and tips for a good 1st mill, starting to ‘get a feel’ for what direction to head in, then you bust out with whatever language that was, and the reality of the learning curve ahead of me to even begin to understand what the hell that hand controller contraption does kinda dawns on me... Sounded like when I hear welders talking or something....

@jamestiberious1372 4 года назад

@@muntee33 first mill in what regards? Machine or cutter? It also depends on what type of material you want to cut with it. If you let me know il do my best to help with what I can

@chrome4096 4 года назад

even if your just beginner...or maybe especially whe... get a amachinist handbook and learn the 3 simple facts about feed, rpm, and the most important cutting speed. It all comes down to this, and the sure have a bit leewayy but not really that much if you dont have expirience. For example: handbook will say: aluminium needs cutting speed of 350 m/min and maybe 0.05mm advance per tooth of the endmill tool diamitar is lets say 8mm you will end up with 14 000 rpm and a feedrate of 2100 mm/s thats a bit crazy so if you want to tone it down then adjust feedrate and rpm at the same values so you maintain the depth of cut...afterall cutting aluminium is basically(...) the same, so tone it doen according to the machine and it will be fine

@gregnokes9880 5 лет назад

I am a certified precision machinist, you should always use 2 flutes mills on aluminum, and if you want a better surface finish increase the rotation speed to the maximum the machine will run and then slow down the movement speed, and the depth of cut and bite you take out of the material. On the large CNC machines we will take a .030-.050 depth pass. This also depends on the length of the mill the longer the mill the more deflection you get which results in chatter and a rougher cut. But on my final pass I will drop that depth to around .015 and get it super smooth. Keep in mind which way your machine flexes in the Y axis, try to control the path your mill is traveling so it cuts going in the more solid path of X axis, and uses Y axis for it travel rather than cut. So on your final pass decrease the depth to .015 and instead of the mill cutting the length way of the machine, have it travel back and forth across the machine as you mill and keep the pressure the mill is receiving against the more solid axis. You might find that improves the finish surface as well, if not fab up some supports for your Y axis so it is not able to flex like it does. Great video, I am trying to decide if I would be happy with one of these machines at home or if I would just be driven nuts by every little imperfection compared to a full sized CNC machine and how they output.

@eastcoastguitar222 2 года назад

Did you end up buying a CNC for home use?

@brianfoster7064 Год назад

@florian florian As I understand from my research (looking into getting one of these) three flutes are best "middle of the road" bits - they can do it all but not as well as bits specific to the job. Single and double flutes are best for roughing. Four and five flutes are best for finishing.

@ronmorris6563 5 лет назад

I would like to comment about why this Endmill, not called a "BIT" broke, it is Not because it is a cheap High Speed Endmill, it is because it is a 4 Flute endmill designed for steel. When we cut aluminum we use a single, 2 or 3 Flute Endmill because they do not get loaded up with aluminum when the endmill gets Hot and makes the aluminum gummy especially when cutting 2024 or 01 condition aluminum. If you would slow down the speed and feed according to your cooling of your endmill and use less flutes it is possible to use High Speed tools. Infact during the 80's it was unheard of to use carbide to cut aluminum because up until then they, (the Carbide Endmills) were not ground correctly to cut aluminum. The manufactures started using different designs and geometry when grinding the carbide to bring about the designs we now use today. I have been a CNC Programmer, CNC Operator, tool and Die, and Mold maker of investment casting molds and Plastic injection molds for the last 40 years and have seen this industry grow throughout the years. Now I that I am about to retire I will have a 4 foot X 4 foot Mill of my design and build in my garage to have many years of FUN with! Enjoy!!

@JohnHoranzy Год назад

Nobody ever uses the Machinery Handbook or ever does the math and they just copy everyone else with bad information.

@adobeone6138 6 лет назад

I learn a lot from John Saunders (nyccnc). He has a professional shop now, with big machines. But he started humble like you. And there are enough principles that apply to big and small machines alike.

@FRCTeamMetalJackets 5 лет назад

6061 is typically the easiest to machine. As you discovered, 2-3 flutes are all you want for aluminum to allow for chip evacuation and prevent welding. With the lack of rigidity of your machine, light radial cuts - especially along the x-axis - will typically cause vibrations that ruin the surface finish. You have to either finish with higher WOC and less DOC, adjusting for the flex of the machine or change to a conventional instead of climb cut so that the flex occurs parallel to the wall cut instead of 90 deg to it. Climb cutting is great if the machine is rigid enough.

@aerohard 6 лет назад

From my experience in aerospace I learned a valuable rule. When you pay for a a drill or cutting bit, you are paying for the quantity of accurate holes or cutting they will preform. A $1 bit that makes 10 decent holes costs more per hole than a $5 bit that makes 100.

@PiefacePete46 5 лет назад

Add to that the disappointment and frustration of poorly finished or ruined parts, and some people will become disheartened and take up knitting instead! Your early attempts may still be part of an actual project that was the reason for buying the machine in the first place. My experience is that the immense pleasure I got from proudly showing off my beautifully crafted veeblesprocket is what made me want to try the next step. Buy the best tools and cutters that you can!

@pierregauthier3077 4 года назад

If you can't run the speeds and feeds the tool was designed for or if you lack rigidity your tool will fail no matter how much you pay for it

@adad2757 6 лет назад

Awesome! If you ever consider upgrading the router just go straight for linear rails. With router spindle speeds a single flute endmill is almost a necessity, it allows you to take an actual chip at lower feedrates to better suit less rigid machines, and single flute endmills are extremely rigid and are harder to chip weld (not impossible ;). If you plan on cutting plate, get stubby endmills, saves carbide (money), and makes your setup more rigid. If you're still having trouble, take a smaller axial cut. I hate doing it, it multiplies the program length but also drastically increases reliability. Don't be afraid to lower your spindle speed to cut a real chip. Idk what you're running in your mister but tap magic has some aluminum mixtures that I've used before and liked. Up the air pressure and make sure the chips are getting blown out, the air blast is more important that the mist, gotta get those chips out. I've worked with an omio x8-2200 which is essentially a 6040 with linear rails and a 3hp spindle. My friend and I have cut boat loads of alu for an FRC robot, and it works great. We can do full depth adaptive in 1/4" plate with a 20% WOC on a 5mm carbide single flute at 40+ ipm, and we slot often to cut out parts, but this requires a lot of feed rate override and micromanaging to not break bits. This is just me typing up a bunch of stuff, I'll likely comment again as I remember more things. Feel free to reach out if you have any questions.

@dougj56 6 лет назад

Mo MO

@c.e.kestner4051 5 лет назад

remember that WHATEVER you use as a coolant will be coating your lungs, too.

@TheKyroMan 5 лет назад

Awesome. You did your due diligence and tested the machines capabilities. 2 and 3 fl are best for aluminum. 4 will chip-weld. Mist is also best, so good job. Should spray a bunch of that wd40 in the bottle and save yourself the hassle.

@PiefacePete46 5 лет назад

I am a great fan of single-flute cutters. They do a lot to improve chip evacuation, and reduce re-cutting. Also, more space for coolant and air to reach the cutting edge, and reduce melting of the aluminium.

@mauricejohns3635 4 года назад

Finally a video that shows what I have been looking for. A CNC router good enough too work on heard t6061 aluminum. So it should not be much harder to put a few designs on my anodized 7075 aluminum lowers

@TheRainHarvester 5 лет назад

Nice to see aluminum stock being experimented with more and more!

@DangerDIY 3 года назад

I experienced the same issues cutting some types of aluminum where the cutting wasn’t what I had hoped for. I have some that mills really well and other pieces that don’t. I found that mild steel always seems to cut well though.

@johnward5890 6 лет назад

In the industry we use Varsol and a misting bottle for aluminum to keep the carbide cutters from sticking to the chips. I even used it on magnesium bell housings for Ford Trucks.

@susie3702 5 лет назад

Hi there, One of the things I noticed was after the first outside cut was made and the machine moved to the next run that you have the feed the wrong way round which makes the bit try to climb over the sidewall and not cut correctly if the cutter is running clockwise than the feed should be anti-clockwise which draws the cutter into the cut and not cause it to try and climb out of it.

@MikeyFirst 4 года назад

Maybe a minor tip: don't use MDF or wood-fibre plate to clamp your workpiece on, specially when using liguids for cooling. It compresses when you clamp your workpiece on it, but worse: if you use water or water/oil mixture or any kind of liquid to cool, this liquid will be sucked in by the waste-board and this may distort the underground, which in turn could result in reduced clamping force of your clamps, your workpiece could get loose etc. And indeed, increasing the stiffness of your construction may increase quality of the cuts. Why aren't you using special cooling fluid in your mist-spray device, it's just designed for that purpose, it won't make such a mess as using water and a spray can of WD40. Nice video though.

@ben7770 6 лет назад

I've got the same machine. For Ali I use single flute carbide cutters. They leave a good surface finish. The bending of the x rails bothers me but as long as you don't push the machine too hard it doesn't affect things too much.

@dazmatic 6 лет назад

Hi there, One thing that I don't think anyone has mentioned yet which is actually the source of ALL of your problems, the motor to leadscrew coupling. I'm pretty certain on these beige coloured machines, they use a flexible aluminium coupling between the stepper motors and the lead screw. Because it's flexible, any lateral cutting forces will cause the axis to bounce on the flexible coupling.

@grantlesueur 6 лет назад

The play in the x axis can be somewhat mitigated my mounting you work closer to the gantry and not in the middle of the machine bed.

@gv7756 2 года назад

Looks good . My 2 cents is Stop Climb Milling go to conventional milling. And WD-40 for aluminum makes big difference. And a nice piece of 1/2 " steel plate or even heavier will stiffen things up "less chatter and More Mass " Keep up the good work

@allenmays8512 4 года назад

Kudos for testing your machine's capabilities and finding a "sweet spot" for what you want to run. You discovered the hard way that aluminum should be cut with carbide end mills that have at most 3-flutes, and that the alloy matters. 6061 is the easiest to machine, although your 6060 looked fine. Two notes: 1) A flexible machine will leave a worse finish when climb cutting. Try a conventional cutting strategy on machines like the 6040 and use climb cutting for rigid setups like true CNC mills. 2) Instead of using water and WD-40 separately, use a water-soluble coolant/lubricant like Kool Mist that is designed specifically for mist systems.

@bounce2159 5 лет назад

Really enjoyed that thanks, like that you kept all the learning points in too. What do you think messed up that final cut?

@nicichapman1433 5 лет назад

watching your other vids how you replaced the bed and aligned the head so its square to the bed, has that on its own improved the finish compared to that last final cut where it was flexing the machine? or just different speeds and feeds has fixed that? Im looking at getting a 6040 very soon ive been watching lots of different vids from people they seem to do what I want to do but just seem a bit flexy, like anything do you buy cheap then spend money to upgrade it to something better or buy something more expensive to start with.

@ficklecycler 6 лет назад

Try out some single flute endmills. It will allow you to use reasonable spindle speeds and feeds. I have this exact router BTW and have really enjoyed it so far. With a 4 flute you're not going to be taking a big enough bite with each revolution and the cutter will heat up fast. I've had great luck with aliexpress carbide single flutes especially the 6mm ones. For smaller, I've had good results with the ebay sourced kyocera single flutes. Good luck and keep it up with the vids!

@MBcreates 6 лет назад

Thanks for you reply! Could you share some links from both end mills?

@Michael-lo3ht 5 лет назад

Nix the music. I'd rather hear the aluminum chips flying than the repetitive tune of the music. lol I was looking at the 6040. Good to see what it can do.

@birdman7135 4 года назад

I kinda liked that funky beat.

@nhojcam 4 года назад

thanks for the video! i've been looking at one of these machines to acquire. maybe a used one. anything chucked into a spindle is called an endmill...not a bit.

@michaelskoblin2315 6 лет назад

At that surface rate, you should be using a 1 or two flute Carbide Endmill with a 45 degree helix. Also, shorten that tool stick-out, unless it is needed.

@The_Digital_Samurai 6 лет назад

Remove the air pressure or severely lower it. For surface finish you need to slow down the movement speeds. Keep the spindle at the high speed though. Your rig is moving too fast at the end to get a good enough finish with that much surface area hitting the bit. Also if you do a deep cut finish like that in the future. Make sure the bit is as straight as possible. Maybe make it a two step process. Have one bit for cutting and another sharper one for finishes. That would save you time and money in the end.

@johnward5890 5 лет назад

Another reason for breaking cutters can be vibration and cutter loads in corner and bends of cut. With a pocket with alot of turns of corners it can load the % of the tool higher and would need the feed speed reduced and some case increased. Chatter residents can break tools too and can be fixed by change feeds and speeds and placement of the part in the fixture or vise.

@Dancopymus 5 лет назад

Nice! Is there no more practical way of fixing the material to the cutting table?

@Backenfutter85 4 года назад

Thanks for sharing your experience

@fastshapes3dsigns290 6 лет назад

What a great video man. Thank you.

@WesThatTechGuy 4 года назад

best to use a single O flute carbide from Amana for Aluminum. This will help a lot. $35-$50 each.

@bbbnz50 3 года назад

Thanx for sharing,1st vid i have seen, with what i wanted to know about cutting Aluminium cheers

@123bugness 5 лет назад

A couple things I noticed, and a couple suggestions - When using that small of an endmill, smaller chip loads are better, stepover is generally 1/3 the diameter, .050" depth of cut is decent. When clamping, make sure the fulcrum is always slightly higher than the work to be held. Your 'axial cut' aka finish cut really shouldn't be removing more than maybe .005".

@MBcreates 5 лет назад

Thanks for the tips! could you explain this part further: "When clamping, make sure the fulcrum is always slightly higher than the work to be held."

@No1sonuk 5 лет назад

@@MBcreates With straight bar clamps, the work end of the clamp bar should be lower than the supported point. It makes sure that all the pressure from the clamp is downward onto the work and table. If the fulcrum (supported point) is lower, and the bar is coming up onto the work, there'll be sideways pressure on the work as well as downward. You might find this useful: www.homews.co.uk/page289.html

@rsilvers129 2 года назад

@@MBcreates He means the height of the far end of the clamp should be at or above the level of the part that is clamping.

@dptp9lf 6 лет назад

Have you trammed the system? May help with surface finish

@brianfoster7064 Год назад

Looking into getting a home/hobby cnc machine. How solid are these frames? Is this style better than the all extruded aluminum frames? Mostly looking at it for sign making. Though, I do intend a little work on aluminum pieces.

@garyg1254 5 лет назад

Did you ever find a supported rail to fit the 6040?

@kayboku7281 3 года назад

i was a machinist 20 years ago, we would never use those tiny cutters for the bulk of the work, use a 12mm slot drill/ end mill for the bulk of the cutting, then use the tiny one just for finishing the small corner radiuses

@kayboku7281 3 года назад

nice job tho! Id say thats a success! Hmmm how to get rid of the chatter, id still say do a finishing cut of 0.5 mm at full depth with a larger diameter slot drill, larger diameter = less vibration, and try to only use the tiny slot drill to do those radiuses, might need a dremel of some sandpaper to help the blending in the finishing cut.

@davideulivi 5 лет назад

I have a 3040 CNC, i don't have cut aluminium yet but i think it's more solid due to its less dimensions

@DodgyBrothersEngineering 6 лет назад

Welcome to the CNC brotherhood. From someone who has been there and done that I would pass on a couple of tips. 1) Starting out don't buy dear bits you are going to break heaps of them. Buy quantity not quality to start with (unless you have very deep pockets). It's false economy because when you don't know how to use them properly you are going to break or wear them out just as quick as cheap ones. 2) Learn about a climbing cut and a conventional cut, and you will very quickly work out what went wrong on the M. (mostly the machine is not really good enough at this point). 3) Learn to work within the limits of the machine and things like chatter will be greatly reduced. 4) Learn the appropriate cutter for the job, as you half worked out that alloy needs to be able to clear the cutter to stop the tip clogging up / welding. The problem was not the amount of flutes you had, but rather you weren't going fast enough for the amount you had. The machine currently can not go fast enough for 4 flutes so instead of speeding up, reduce the amount of flutes down to one or two, so you don't have to.

@MBcreates 6 лет назад

Thanks for sharing your knowledge!

@keithlucas6260 5 лет назад

I've taken busted two flute endmills and made single flute "flycutter" for high rpm finish cutting.

@lpjunction 5 лет назад

@@keithlucas6260 For my ER-11 collet I put in a 6mm single flute straight edge usually used in wood work for trimming edges. Works for plastics and aluminum.

@scott185 5 лет назад

wow seeing this really makes me appreciate my workbee cnc even more. I have been cutting 8mm aluminium plate for the first time and its been cutting very clean and within +/- 0.02

@dwalden74 4 года назад

How powerful should the motor be if I want to cut 20mm thick aluminum?

@aaronespino2017 5 лет назад

Hello friend, excellent video! I have a question, what features does your cnc have? I mean the type of engines you used and the guides, thank you!

@MBcreates 5 лет назад

Thanks ! it's a chinese CNC 6040 with a 1500 watt spindle and nema 23 stepper motors. you can see more info on ebay goo.gl/cT5X4E

@keithlane4343 5 лет назад

Couple questions. Where did you purchase that mill ? How much ? Can the spindle speed be reduced to 2,500 to 3,000 ? Was it already assembled ? Is it all aluminum ? Thank you PS. A good place to start for speeds and feeds is : Cutter speed ( every material has a cutter speed. You can look it up in Machineries Handbook ) x 4 divided by diameter = RPM If it's a lathe, that's the RPM of the stock, if it's a mill, that's spindle RPM. I've got 40 years as a machinist, CNC machinist, production engineer, and that has always been a great speed to start at. Tweak as necessary.

@alanhardman2447 5 лет назад

I tried that twirking stuff - it doesn't work on alummm. Never mind... I see now you said TWEAK. And he said he got it for about $700.

@caseycappoen251 5 лет назад

Needs to run way slower feed, Needs roughing pass and finish pass FOR SURE! 4 flute-5 are for steel typically. 3-2 flute are best for Al.

@paullamb7697 5 лет назад

also with the rotation of the bit clockwise, you would be better cutting in the same direction, or you will get that bounce

@toddspeck9415 5 лет назад

Sure wish I could figure out how to get my 3040 up and running...Really tricky figuring out all the steps to get these going. Major big time stuck getting mine going. Guess eventually I will have to buy the motion controller for 80 to 100 bucks...then buy Mach 3 or 4 for 175 to 200...Super stoked seeing your's running.

@MBcreates 5 лет назад

Hi Tod, That sucks. Have you tried posting your questions on forums/Reddit?

@toddspeck9415 5 лет назад

I am slowly figuring this out...so stoked...learning so much as I go. I am determined to be good at cnc.

@naoufelmelayh240 5 лет назад

hi at what rpm do you mill please , thanks

@pitsfpvbunka1312 5 лет назад

I have the 4030. The Z-axis can be moved upwards by about 2 mm. The ball screw is not fixed. Maybe this is the case with you and the vibrations are caused by it. I have not milled aluminum yet. With wood I had no vibrations. The spindle is too heavy.

@jonjonsson6323 5 лет назад

Try switch the tips, some materials are actually easier to cut without hss or ceramic, and just go for hardened old steel, especially cutting inconel and chopping things like aluminium

@ozi-world 5 лет назад

use methylated spirit with a spray bottle. it allows for much more clean cut and less load up on the bit. you'll see the difference.

@Jopakilo 5 лет назад

how much watt of rotor can do aluminium milling?

@Bill53AD 6 лет назад

Use 6061-T6 for milling. We use 4 flute on it all day long with zero issues of packing. Your packing was from to high feed and not enough cooling.

@conceptinterface 6 лет назад

Yes, 6061 seems to be the most popular alloy for machining: T4 or T6. But 2011 is also highly rated for machinability (I don't know what temper).

@rcrdps8144 Год назад

Nice video. I have one of those mist kits laying around waiting for drilling/tapping, or 3d printing something to attache it,.. I like your approach better. I can do zip ties all day long. :D What is your spindle speed? I've had the same issues with clogging. I actually found it easier to cut steel because of the aluminum clogging the bit.

@gracebyseven 2 года назад

Hi friend, thank you for these videos. I had a 3040 CNC but could barely cut 3mm 6061 with. Is the the 6040 more powerful? Did you upgrade the router or any other components to be able to cut this aluminum. Thank you!

@lukebrown6913 Год назад

Hi, I have just bought a 3040....what's the wattage of your motor?

@rsilvers129 2 года назад

What do you mean that the X axis is "unsupported?" Is it not connected to the two 15mm plates on the sides?

@juang.3030 6 лет назад

Interesting video for novices in CNC. Could I give the link to the velocity table ?. Thank you

@user-sw2ol6jx8p 4 года назад

Here are the cncmachinediy.com you need, not only the complete range, but also a lot of models easy for novices to master.

@allextun2543 5 лет назад

Excelente trabalho! Parabéns.

@jonathancapetillo568 4 года назад

with this guy if i buy bits for acrylic im assuming it can cut acrylic very nicely right? of course if it does i will buy the best bits for acrylic i can find can you tell me if this would work for acrylic

@MBcreates 4 года назад

You are better of with a single flute end mill for acrylic. Some companies are making special tools for cutting plastics: www.datron.de/en_gb/cnc-milling-tools/product-range/acrylic-end-mill.html

@LittleCraftersBoxes 5 лет назад

Hi, I noticed you are using a 6040 CNC router with Fusion 360. When you when to post process in the CAM part of the software, what machine did you select please?

@mitsuman007 5 лет назад

You usually select whatever software you are using to drive the machine. I use LinuxCNC so I pick that. UCCNC and Mach3/4 are also on the list.

@jackcapella2707 7 месяцев назад

I wish you would have gave the specs of your machine. It looked pretty beefy and I would have thought it would have easily handled the job so I am a bit disenfranchised looking at the purchase I made… I am looking to do similar work flows.

@xillianto 6 лет назад

couple of tips: 1, turn WD40 can upside down and remove all pressure, drill a hole into bottom and fill that mister with WD40 instead, you waste allot of it here as the air just blows it away instead of to the cutter. I use methylated spirit on my mister and that works wonderfull, used it on alu for 2 years, both cools down and.. you dont really have any cleaning after.. 3 flute will work good here, as it has thicker core than 2 and 4 flute, i would also recommend to leave 0.2-3mm leftover radial and when you are done, do a cleanup pass with full depth to remove that leftover, gives a cleaner edge and wall finnish, experiment on how mutch leftover you need, if you have allot of marks from machining, you will need more to remove it in 1 or more layers in full depths. Saying that it was way to fast for a 4 flute cant be right, i cut at 2500 mm/min on 3 flute at 14200 rpm on my DIY cnc (aprox 0.052 chipload i think).. abit more sturdy than that china machine, but still. Also, those misters works well at aprox 2 bar pressure.. i have tried more and less, but with those chips 2 bar will be enough and compressor doesnt run hot on long run, you can check my channel for some of my cuts on alu, mostly test cuts.. should reckord a real cut (i have one, but my motormount was actually falling apart, so had to go very slow as i cut a new mount)

@MBcreates 6 лет назад

Thanks !

@PiefacePete46 5 лет назад

Kerosene also works wonders, and is more economical.

@No1sonuk 5 лет назад

You can buy refillable spray bottles and 5l refill cans.

@alanhardman2447 5 лет назад

I have a bit of experience with machining, myself - since 1975, and I've NEVER seen a better cutting fluid for finishing aluminum than solvent. Yup, the solvent used in a standard shop parts washer. I, too, would simply suggest slowing the spindle speed and adjusting the feedrate for the proper chip load... Just sayin'!

@satxsatxsatx 5 лет назад

wd40 is available as liquid www.amazon.com/WD-40-Multi-Use-Product-One-Gallon/dp/B00HEVDA1O/ref=sr_1_3?gclid=CjwKCAjw0tHoBRBhEiwAvP1GFbUFRfxqSIwgnscSV1CV_J_rMRl9mmQu38MU2CaW_n8wXQ6mM_nhXxoCdZcQAvD_BwE&hvadid=233970095727&hvdev=c&hvlocphy=9028059&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=7849571284478519757&hvtargid=kwd-322422269664&hydadcr=947_9642198&keywords=wd40+liquid&qid=1561636301&s=gateway&sr=8-3

@Masterpj555 3 года назад

Is your 6040s the version will ball screws or just regular trapezoid thread?

@vjayishere7010 Год назад

Can we use 1.5mm diameter cutter easily, what u suggest

@thetruechaos 4 года назад

Its a weird when I see these machines in action. Usually the floor damn near buckles under my Japanese iron when we take a cut. I can feel the machine rapid from 40 feet away and chew chips as big as rose pedals. At times flames rip forth as if you have ruptured hell itself. This is where I started, and its much gentler haha.

@mecanizadosgrela7380 2 года назад

Hi, how many watts is the motor?, thancks

@soothcoder 6 лет назад

Was the final surface finish because the CAM tried to do a fine climb cut at the end? Your machine might not be rigid enough to climb cut.

@ronc1357 6 лет назад

Exactly, his machine isn't rigid enough to do climb milling, I don't know for sure but I am guessing that his machine doesn't have any backlash devices either. I would suggest milling in a clockwise direction, he is milling in a counter clockwise direction (climb milling) I don't know if the program will allow this or not.

@icecreamtruckog3667 5 лет назад

Why not mist cutting oil. I've heard that single flute bits are the best. You need more stiffness in your cnc machine frame.

@billberney3750 5 лет назад

Another tid bit is, instead of using High Speed End Mills, use Carbide 2 Flute End Mills. Yes it's a bit higher in price, but the tool will outlast high speed and you will see chips instead of dust as you called it. Also by adjusting Speeds and Feeds to accommodate the Carbide End Mill will be neccessary. Good Maching.

@thebeststooge 5 лет назад

Single flute is what is suggested for aluminum from everything I have read or seen.

@alanhardman2447 5 лет назад

Use carbide on aluminum ONLY if the tool is coated. And never m,ore than 3 flutes. High speed steel 2-flutes work just fine.The real problem is that 4-flute endmills don't have proper chip clearance for chip evacuation, causing material to "roll" forward and back into the web, packing it full and overheating the material. It then "plasticizes", or gets "gooey" and stalls wimpy spindles, or breaks wimpy endmills.

@DarkMatterLP1 6 лет назад

the "Clogging up" is called chip welding, its caused by poor chip evacuation and recutting chips

@hodmaoz 5 лет назад

What software do you use?

@bigrickshaberdashery2759 5 лет назад

we use to use a water-soluble oil turned the water creamy whitish but had great lubrication and cooling characteristics.. Can't remember what it was called, anyone else out there knows?

@juttryit.6747 4 года назад

Great video sir , I like to know about machine, How can I ordered it? Price of machine and other required end mills or cutters. And like to see machining video on Jewellery product of silver or gold.. Plz send mi information

@skatescooter619 4 года назад

hey , does it work with steel ?

@PaweAndruszkow 3 года назад

whats the name of used software to design shape ?

@jumeDIY 4 года назад

nice video ,Thank for sharing

@ostry599 5 лет назад

always assemble the tool SHORT as soon as possible. Try one flute bit... 4 flute is for finish work.

@garyradov3935 4 года назад

take the spindel speed 4and 5000 drop the feed made cuts to o.5 rough the bulk of the aly out then drop to the face and take one cut for finish

@denishegemann6990 4 года назад

but what kind of aluminum is it?

@DesignThenMake 2 года назад

what program did you use for generating gcodes?

@law-ofohms7815 5 лет назад

I have a 6090, cut aluminium all the time. 2.2kw spindle, run at full rpm, single flute carbide cutters, depth of cut ~20% of the width of the cutter, cooled and lubricated with an ethanol spray.

@MBcreates 5 лет назад

Which brand end mill do you use? Link?

@law-ofohms7815 5 лет назад

Datron, and don't balk at the price, well worth it. Or go 2 flute ebay carbide. but be highly polished. Its a router, not a mill. Milling tools with tight helix are not that great. What I look for is a 'slotting' cutter, as most of the work is cutting out the shape, not side milling a chunk of aluminium.

@stephensharma3259 4 года назад

where did u buy from... any link?

@carlesp.r.8441 3 года назад

What's the size? Is it too loud for a flat?

@jeffgreenfield7025 6 лет назад

I use an air tool oiler for the misting unit, and olive oil for fluid. 1 drop every 10 seconds or so, no smell, no sticky residue, and wipes clean. No health effects either!

@MBcreates 6 лет назад

That sounds pretty good. I’m going to test it. Thanks for the tip!

@kayboku7281 3 года назад

was that first cut at real time video? I was thinking that feed rate is terryfyingly fast! Then snap! haha. At a guess i would start at a quarter of that feed rate.

@carlossalvadormoralesjuare7037 6 лет назад

You need to reduce the speed rate, reduce to 1 floot the endmill this endmill is special for aluminum alloy

@CalvinoBear 5 лет назад

A shorter tool and a zirconium nitride coated carbide endmill will make a big difference. The shorter cutter is 8x stiffer for every halving of length and the zirconium nitride keeps the aluminum from sticking to the cutter. Makes a world of difference in aluminum.

@charlesferragu6462 3 года назад

what is the name of the 6040 cnc router your using

@haansworsie 3 года назад

1-3mm aluminum/3.175mm single flute. 4-6mm/4.762mm single flute:cut length 8mm. 7-10mm/4.172mm single flute: cut length 12mm.

@airgunningyup 6 лет назад

question.. I got the USB version and also have a 32 bit laptop on the way.. any tricky stuff ill run into getting setup , aside from tuning the machine in mach 3 ?? ive been watching every single video I can find for 2 weeks , I know from my last cnc router, there is a limited amount you can prepare because there are odd quirks that each individual may or may not see. ( for example , the machine was designed around F engrave, needless to say my computer would not run F engrave so I had to use vcarve , fusion , and easel, none of which I anticipated beforehand.

@MBcreates 6 лет назад

Congratulations on buying your machine. Your comment made me smile, I had that same child like awaiting when I had ordered my CNC. Setting up of the machine shouldn't be that difficult if you have some basic tech skills. Mach3: understand the 2 coordinate systems. Machine coordinates and workpiece coordinates. When you understand these concepts decide if you are going to use home switches or if you are going to home the machine by hand (every time you start your system up). CAD/CAM: I a big fan of FUSION 360, there are many YT tutorials, one year free trial and the UI is easy to work with. FEEDS/SPEEDS: I have a spreadsheet to calculate my feeds and speeds. Working with a spreadsheet helped me a lot and I highly recommend it. Most engraving spindles have almost no torque at low rpms, so I don’t run my spindle under 10k RPM. with a spreadsheet you can reverse calculate what feeds and endmills fit with this RPM range. When you understand the things I listed above you should be fine.

@airgunningyup 6 лет назад

well that's good , thanks for the reply. Im a machinist ( manual ) so all the cutter geometry, feeds speeds etc will be fine.( yes the strictly manual machinist is going the way of the VCR , im aware ). Its the computer end that has me anxious.my last machine had homing switches, but the machine would quickly lose steps and think its off the table and hence I returned it/The biggest issue im reading about is the " free " version of mach 3 and the limitations there..

@stevenleexqllaser4341 5 лет назад

good work

@legionjames1822 6 лет назад

This is the cnc machine i had pegged as the best for the money. Its nice to see it working. Did you have to upgrade anything or did it work after you got it all assembled? Also i would have started cutting at a much slower speed. I cant believe it cut that fast. Its a cheap Chinese machine slow down your feed rate.

@MBcreates 6 лет назад

The only upgrade I did so far is installing home switches. I used the UC 100 usb motion controller and a 64 bit laptop.

@shelby50411 6 лет назад

Yes the feed speed is way too high for this machine....slowing down would produce better results and not stress the machine

@gordonwiessner6327 4 года назад

Did you program in a final profile cut? The rigidity of the spindle or table needs to be check, too much slop. Use a dial indicator to check run out. Also the quality of the spindle need to be checked. I believe the spindle bearings are not a precision matched set or properly preloaded. Does your software have programmable backlash compensation? Or does the machine PCB have pots for adjustment? I know these types of units aren't Fadels or a HAAS or have Fanuc drivers but the quality of the finish could be better. The other thing that can cause problems is the frame is too light and not as rigid ASA normal CNC. However, after every part of the frame is aligned get a taper drill and reamer and install two (if possible) taper pins where ever the frame bolts together. Make sure it is setting level on what ever you're using for a machine base. For such a light machine if you're going to machine metals to the depth you did in the video, consider anchoring it down. If the machine doesn't have spindle speed and feed over ride pots check to see if you can install them. Also grind a small flat on the shaft of your end mills where they align with the tool retention screw. I do believe you can get a much better finish.

@madasamyramasamy6297 4 года назад

Sir...How much cost this type of cnc to india...

@andytaylor8802 4 года назад

Is this a belt CNC or leadscrew?

@mallias2683 5 лет назад

Dude the best possible solution for cutting aluminum alloys is one flute carbide endmill. Expensive but with proper coolant mist you can cut with 3mm diam. thickness of 2mm with 1000mm/min with high rpm, more than 20000. Or with 4mm diam. you can easily cut 5mm at 500mm/min. I use an alcohol solution for coolant and it works wonders. But it is essential to have a rigid machine. If you can move something by hand then you have problems....

@dejanbrice8774 5 лет назад

Strongly agree also! I used to use two flute and they where ok but damn single flute is a whole new world! 24000rpm pushing 1000mm/m, 2mm doc and 3mm over with a 5mm bit!

@garylarson6386 3 года назад

if you put an indicator against the spindle and can push more than .002 or more forget aluminum untill you beef up the router, you need enought chip load to not wear the end mill, I just scrapped a 25 year old 3,000 lb box way machining center, rigid is everything for metals, cheeting will just cause fustration, coolent wont help cutter deflection

@MrAxman121375 5 лет назад

Does this machine do G-Code and M-codes? Looks fun to learn on

@MBcreates 5 лет назад

Hi Kenny, You control the machine with a laptop that runs Mach3, that's the control software that sends the pulses to the stepper drivers . You can type G-code / M-code straight in Mach3 but most people use a CAM program to get the G-code. So you don’t have to know G-code / M-code to run the machine. And yes it’s a fun machine to learn CNC!