My Most REALISTIC Fir Tree Yet!

Подписаться 36 тыс.

Просмотров 150 тыс.

50% 1

Hey guys, I'm back with another tree tutorial! This one took some experimentation but I'm pretty happy with the technique so far. Let me know if you have any questions or thoughts in the comments below!
Patreon: / geordiecrafts
NO PRESSURE to be a patron, please don't give me money unless you have all your expenses squared away and you genuinely just want to support my ridiculous endeavors
--------------------------------------------------------------------------------------------------
Creator channels mentioned:
‪@BoulderCreekRailroad‬
‪@TheTerrainTutor‬
‪@RealTerrainHobbies‬
‪@boomerdiorama‬
----------------------------------------------------------------------------------------------------
Materials:
Note that all links below are Amazon affiliate links. I receive a small commission on anything ordered through my links (even if it's not the item linked) at no additional cost to you. Thanks in advance! :)
Canada
5mm dowels amzn.to/3GrePWe
Pin Vise amzn.to/3N59C8Z
Wire amzn.to/3lMEVJQ
Plumbers hemp amzn.to/3lOWXLl
Golden fiber paste amzn.to/38MOXrD
Small hook (for twisting wire) amzn.to/3lTQjnf
Superglue amzn.to/3N101Qp
United States/United Kingdom
3/16" dowels amzn.to/3z4n5Kf
Pin Vise amzn.to/3x0uebN
Wire amzn.to/3PL64uq
Plumbers hemp amzn.to/3t0giNy
Golden fiber paste amzn.to/3t4cYBk
Small hook (for twisting wire) amzn.to/3wXjef0
Superglue amzn.to/3lVkdYj
-------------------------------------------------------------------------------------------------------
Music:
In My Mind - Alex Makemusic
Chasing Stars (instrumental) - Icarus
subs when published = 818

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 326

@itribbits633 2 года назад

I didn't have a dowel, wire, or any of the other materials so I just drew a picture of a pine tree but it wasn't very realistic. What did I do wrong??

@Geordiecrafts 2 года назад

LOL, every recipe review ever

@katiewaterrose 2 года назад

Dammit I've had to rewatch the same 30 seconds of video because I keep laughing at your comment 😂😂😂

@beenakamal1692 Год назад

Gwad, I can't stop laughing!

@KnarbMakes 2 года назад

Forget the tree (which is fantastic), the real work went into editing this video together, this must have taken you ages, well done!

@Geordiecrafts 2 года назад

Thanks so much! editing always takes so much longer than I think it will and this was certainly no exception haha, I'm glad you liked it 😊

@CreativeKristenTaylor 2 года назад

I’ve been waiting years for a tutorial like this because I’ve always felt that 5% difference makes for an amazing tree for photorealistic dioramas, so thank you so much for sharing this. Also, your channel is worthy of soooo many more views and follows (and here’s one more person subscribed!).

@Geordiecrafts 2 года назад

I agree! Little improvement can go a long way! Although I completely understand that not everyone would feel this is worth it haha Thanks for sub, I appreciate it 😊

@RyeBreadGangster 2 года назад

I loved this video and I’m going to use it as a reference to make some trees. And just a heads up: This channel is going to blow up with more well edited and well executed videos like this. You’re going to be a huge channel if you keep it up!

@Geordiecrafts 2 года назад

That's awesome, please share your results when you're done! I love seeing others people's work 😁 and thank you so much for the kind words!

@RealTerrainHobbies 2 года назад

Hey thanks for the shoutout! Saw this from Knarb's community post. Awesome tree and great video! And heya from a fellow Canuck!!!😊

@RealTerrainHobbies 2 года назад

I may use this tree method in the future as these are incredible. Again, awesome vid 👌🙂

@Geordiecrafts 2 года назад

Thanks for stopping by! I've been a subscriber of your channel for a while now and your projects are awesome! That castle build was absolutely unreal! Can't wait to see what other creations you make! Also Excited to see a fellow Canadian on here too! There are a few of us in the crafting video space now! We're taking over haha

@Geordiecrafts 2 года назад

Awesome! Can't wait to see how it turns out! Let me know if you have any questions 😊

@RealTerrainHobbies 2 года назад

@@Geordiecrafts Haha we are indeed! And thanks!!!😊😊😊 I will definitely give u a buzz if I have any questions or issues👌🙂

@Siletzia Год назад

I'm a huge fan of Luke and Boomer, and I've now added your channel to my tree tutorial must watch list. I hadn't previously seen some of your techniques, so I have some new ideas to go with. One question is, where did you find the tree guide @3:13? I've been looking for something like that for some time. Thank you!

@drewbakka5265 2 года назад

Amazing build for dioramas but no way it's gonna help me build a gaming board lol

@Geordiecrafts 2 года назад

Oh I definitely wouldn't want to make more than 1 or 2 of these haha. I just have a weird love of tedious tasks 😅

@OnceinaSixSide 2 года назад

Huh, you weren't kidding - that is a lot of effort! Fantastic result though, and great job squeezing the whole process into a 5 minute video.

@joshuaturnquist5538 2 года назад

This is the most impressive model tree I have ever scene. Absolutely mad, awesome job.

@Geordiecrafts 2 года назад

Aw thank you! 😊

@traversal6881 Год назад

Scene? I saw what you did there. :p

@RodBatten 2 года назад

Great job making this tree. It is a bit involved, as you said, if you want to make a bunch, but I don't think faster trees will ever look this good. Great video production quality, too.

@boomerdiorama 2 года назад

I love the innovation on your wood dowel - wire armature trees! They look fantastic! Yes indeed, they are also tough and will stand the test of time as well - a true model tree. Bravo ~ Boomer.😁

@Geordiecrafts 2 года назад

Thanks so much! And thanks for the tips in your videos and comments! 😊

@boomerdiorama 2 года назад

@@Geordiecrafts Keep it up. It only gets better! Cheers.😁

@benweinberg3819 2 года назад

I know you said this was a time sink to make, but it looks so easy, fast, and effective here! Video production is also great, consider me subscribed

@Geordiecrafts 2 года назад

yeah I honestly don't mind doing tedious work like this, sometimes it's nice to just turn the brain off for a bit haha. thanks so much for the kind words and subscription!

@Prishacraftstudio Год назад

Fantastic Work!!! But in India hard to find these materials 🥰🥰🥰

@galatician8063 Год назад

Love it! ❤ Certianly a new twist on this method ! I will try this some day, and subbed. Thankyou! Well done!!!

@courtneywatts4550 2 года назад

I’m so glad some of us have found you through knarb makes! Your editing is incredible and you have sooo many useful tips!! I love that it’s all done and explained in a simple way to follow along and make with 😊 I can’t wait to see what else you have in store, and now time to go watch all your other videos haha 💕

@Geordiecrafts 2 года назад

Oh gosh thank you for the kind words! I am super grateful to knarb for sharing, as the majority of my traffic for this video was from that post! Thanks for checking it out! 😀

@ConjuredCraft 2 года назад

Great build, fantastic video, and awesome presentation! I'm gonna give this a go on my next diorama project 😁

@Geordiecrafts 2 года назад

Thanks so much! And that's awesome to hear, be sure to let me know how it goes 😀

@triumphmanful 9 месяцев назад

I just found a roadside Chistmas tree ! It has snow & lights. I can make a 1,000 trees for my diaramas . You would not believe what people throw out. Just take a ride through your local condo streets . I find really great stuff. I am a re-cycler re-purposer. I need a barn for all the things I find. TVs, blender, toasters, microwaves, air fryers, and much more. My wifey is not happy with all the stuff I bring home. But I can't allow the goodies to go into the landfill ! America is so wasteful. FYI I Happy New Year.

@AlexScheidmann Год назад

Hello this is amazing..I have subscribed your chanel..I like landscape modelling..Grettings from switzerland.Alex.😀

@AlexScheidmann Год назад

You are welcome. I have also a nice Chanel. Trees, Rocks, waterfall. I like landscape modelling.. Grettings from Switzerland Alex 🤔😊😊👍👍🇨🇭

@FacilityD20 2 года назад

That turned out great!

@Karlmakesstuff 2 года назад

Looks perfect! Definitely a bit too labour intensive to make too many, but making a couple for a highlight piece is definitely worth the time. Thanks for sharing this!

@Geordiecrafts 2 года назад

Haha yes it's not a quick method by any means, but if you're looking for extra detail in your front-and-center tree(s) it's not so bad 😋

@Scapesy 2 года назад

Really good! Tedious is worth it with results like that! Great video 👍🏻

@funnelfan 10 месяцев назад

For drilling holes in the tree trunk, get a Micro-Mark mini chuck for cordless drills to hold the small bits. That will make that job must faster and save your wrist from hurting.

@ZaneMorganCrafts 2 года назад

This is seriously my new favorite tree. Thank you 🙏🏻

@rushthewash 2 года назад

That tree is top notch! Nothing makes a miniature table look as awesome as a few well made trees!

@Geordiecrafts 2 года назад

Thanks! And I agree! All the focus is usually on miniatures (which are important of course), but a few good trees can really add a lot!

@AmbiEID Год назад

I've been looking through videos on fir tree techniques for the last several days for a project and none of them came close to being as helpful and concise as this one was. Thanks for sharing your work and also great edit!

@MiniQuest64 2 года назад

Certainty of 200% work. Small percentage of improvement. What are we waiting for?

@Geordiecrafts 2 года назад

Right? You can't go wrong with those numbers 😂

@marksmith5083 Год назад

Just found your channel.. love the terrain/scenery builds. This fir tree tutorial is the best I've seen... and I've watched a lot.... Will def try this technique.. 👌🙂

@TheBasicBrush 2 года назад

Great tutorial! When you say time consuming... How long would you say it took? Work time and actual time 🤣

@Geordiecrafts 2 года назад

Thanks! If I'm not filming I can get this style of tree done in 2 - 3 hours (excluding the first attempt, which takes a while to figure out the best setup and technique). When I'm filming it takes 5 or 6 hours haha

@mikeflack555 Год назад

Yes, it takes a couple of hours working relaxed followed by many years of excellent satisfaction. Few endeavors have such a stellar ratio. Well done. Excellent also that you mentioned others from which you learned. Subbed.

@ChickensTabletopCrafting Год назад

Really cool Tree. A combination of different methods with a great result. Well done. Allso a really good video. 👍👍👍👍💪 Best regards Chicken

@mrblack5145 2 года назад

I've never made a diorama, a mini, or a tree. But I'll be damned if this isn't entertaining to watch! You've earned a sub from me, and I'm gonna hurl myself down the rabbit hole of your content and see what else I can learn!

@Geordiecrafts 2 года назад

Thank you for the kind words and the sub! I don't have too many videos up yet, but I have lots more in the works!

@christophelecorre7902 Год назад

Brillant love your technics

@JasonM69 2 года назад

This was a great video and tutorial. Ya that looks tedious, but I do want a forest haha. Would look cool with some sort of fake snow too! Maybe with a zenithal with white spray paint.

@Geordiecrafts 2 года назад

Thanks! It would take a long time to make a forest, but sometimes it's nice to turn the brain off and do a tedious task haha. I agree! A zenithal and/or snow would look great on this tree! I plan on doing a winter diorama later in the year 😊

@Nat1videos 2 года назад

Very cool, definitely the most realistic pine trees I have seen!

@Geordiecrafts 2 года назад

Thanks! I'm pretty happy with how it turned out 😊

@deraildarrell Год назад

Hi and Hello Geordie from Southern California USA 🇺🇸 . I'm a new subscriber to your channel . I Enjoyed this tree tutorial... realistic and beautiful 👍😎 Darrell

@Geordiecrafts Год назад

Hey Darrell! I've been watching your channel for a little while now, great stuff! Thanks for stopping by 😊

@hugomuller2339 Год назад

Holy Maccaroni 🤯👍 That Tree looks better than Mother Natures 😂👍 Very amazing Best wishes 🤘😉

@100rabhaarydubey Год назад

अधुना

@PKTCrafts 2 года назад

I found it helpful AND entertaining. Very well done!

@Geordiecrafts 2 года назад

thanks so much! ☺️

@Krazblackheart 2 года назад

Looks amazing! Mayby if I one day make a diorama would give this a go. But not gonna make entire forest like this 😂 Bit too much work and time for me. But would look very very cool thou…. 🤔

@Geordiecrafts 2 года назад

Thanks! And yeah that's why I put the warning in the intro haha, it's a bit much if you need more than a couple trees. If you just need a couple front-and-center trees it's great though 😀

@ottawakapitalgaminggarriso8577 2 года назад

Amazing work as always!!!

@MosriteCharlie Год назад

What is the waxed string called? What size wire? Well done by the way.

@Geordiecrafts Год назад

The string is called "plumbers hemp" and the wire I'm using here is craft wire from the dollar store that didn't have a gauge labeled, but I believe it's 24g or 26g. I have used 24g floral wire on other trees and that works great. Just make sure you don't get steel wire because it's super springy and very difficult to keep straight and work with. This is an example of the wire I've used before amzn.to/3iPw63u (that's an affiliate link, feel free not to use it though!)

@BATTRAIN1 Год назад

A perfect video with no wasted time listening to useless chit-chat. As far as getting a point on the top of the dowel I use a barrel pencil sharpener that I got for $1.79 at Staples. You can get ones that take larger-diameter pencils.

@CCMinis 2 года назад

That is one crazy realistic tree, well done!

@Geordiecrafts 2 года назад

Thanks so much! I'm pretty happy with how it turned out 😊

@brianburke2140 9 месяцев назад

Wow! I Love the results but you had me at : 200% effort for 5% improvement!!! You Rock so Hard!

@ethobbyshow 2 года назад

That's a great tree! Conifers are difficult to make. Because of how Spares they are

@Geordiecrafts 2 года назад

Thanks! I've always found the same thing. I tried a dozen different methods and some were really good, but I wanted to experiment and see if I could get any further improvements. I'm pretty happy with how it turned out 😊

@ethobbyshow 2 года назад

@@Geordiecrafts they look great, keep up the great work. I found that clay sculpting the tree in my Elden ring diorama turned out to be the best tree I had seen. But like all else, everything can be improved upon

@albertofranchi6408 Год назад

Super fantastic 🤩

@googlyincorporated 6 месяцев назад

I'm upset that I watched this. It looks SOO good. But either I won't make one (Likely what I'll do) Or I'll try to make a bunch for a forest diorama. Thank you and curse you and also bless you and your level of patience.

@Geordiecrafts 6 месяцев назад

Hahaha you're welcome and sorry 😂

@googlyincorporated 6 месяцев назад

@@GeordiecraftsI'm making a diorama in the woods for a couple little indians I have to live in. I'm going to attempt to make at least three of these to put in there. Thank you so much for sharing this. They look absolutely fantastic.

@RisingApe 2 года назад

Epic as always

@uptownphotography 3 дня назад

Very nice video and method of making awesome looking trees. I make the conventional (for a lack of a better term) evergreen fir type trees w/twisted wire and ground foam, however, I may give these a try for some foreground trees. Much more labor intensive, but worth the effort for a large HO Colorado type model railroad. I need about 500-600 trees (or more) so most trees will be twisted wire, but I will definitely try your awesome technique! Well done and very well explained. Now, if I could just find a way to make the twisted wire fir trees faster! Philip Jersey Shore Area

@BritishBeeMan 2 года назад

Switching measurements is fine. We use both in the UK too 🙏. Epic tree by the way!

@Geordiecrafts 2 года назад

I'm glad we're not the only ones! Haha. And thank you! 😁

@johnschutt9187 Год назад

It's funny. I watch two of those channels regularly. I found the third just before watching your video. And, I just bought the Golden Fiber Paste today after watching Boomer Diorama! Small world. Your tree is magnificent. What a great idea to twist the wire with a drill. It's gorgeous. Probably the best that I've ever seen. Now to get an airbrush!

@David_Musicpro 8 месяцев назад

Excellent looking fir tree! I absolutely loved your tutorial, camera work, excellent editing and follow-through guide and explanation. I am going to defiantley use your methods. Thank you so much for sharing!

@dkbibi Год назад

Woah! The editing and production value on your videos is like adding hot sauce to your spaghetti! Sooo spicy, sooo good!

@BPCustomCreations 2 года назад

Absolute quality here 👍 Well done on the video and that tree is sweet!

@Geordiecrafts 2 года назад

Thank you! The video took a long time to edit but I'm pretty happy with it! (And the tree too haha)

@iambenk Год назад

Wow, this tree looks just stunning 😻

@briankistenmacher Год назад

I just discovered your channel. Very nice! Having been a disciple of Boomer's for 2 1/2 years now, and using and adapting his tree-making techniques to create my own, I'm glad to add your method to my growing catalogue of options. Thanks. ~Brian

@DMStraylight 2 года назад

Well, that earned a sub from me. Excellent technique.

@Geordiecrafts 2 года назад

Thanks! I appreciate it! 🙏

@earthmanbrick 2 года назад

Damn, that editing was somehting else. The tree looks grand but seems very time-consuming & like a lot of work. As you said though, 'worth it'

@teresa579 Год назад

Aqui no Brasil infelizmente a impressora 3 D é o preço de um carro popular ou até mais, as lojas não tem tudo que no país de vcs tem, como por exemplo as folhagens do Bansai que vc explicou como fazer, inclusive nas lojas do seu país que vende produtos para Dioramas, aqui no Brasil infelizmente não temos, as poucas lojas físicas tem o básico, lojas virtuais tem, mais é um absurdo os preços infelizmente e a maioria dessas lojas são de outros países, portanto fica difícil para nós que gostamos de fazer essa arte maravilhosa, e nós viramos com o que temos, tintas, palitos de sorvete, pirulitos etc, pó de serra pegamos em oficinas que fazem móveis sob medida, daí tingimos com as cores que iremos precisar, aqui tem esses cabos verdes para fazer uma árvore 🌲, mais as vezes usamos o cobre de fios elétricos para fazer uma árvore como essa, utilizamos microfibra para cobrir a árvore, e tem que ser bem fininho, e depois colocamos o pó de serra, e fica muito lindo tbm. Conheço brasileiros que moram nos USA e fazem esses trabalhos com personagens da Marvel, e eles dizem que realmente aqui no Brasil não tem tudo que eles precisam para fazer os lindos trabalhos, ou melhor a Arte. Mais assistimos nesse canal, trabalhos lindos e em cima desses trabalhos, usamos nossa imaginação para chegar o mais perto possível do que vcs ensinam para nós

@TheTerrainTutor 2 года назад

Love it!

@Geordiecrafts 2 года назад

Thanks so much Mel! A lot of my work is heavily inspired by you! And my other tree style came directly from your complex tree armature video (I linked it in the description of course). Thanks for everything you do! 😊

@mikemealey3661 Год назад

♡that looks great! ☆pine trees are scrawny because they are crowded out in nature

@theladybaltimore 10 месяцев назад

What!? No disgusting flocking !? Seriously, this is freakin' realistic!

@arcanium7513 2 года назад

A high-quality and very informative, entertaining video 😄 And the tree turned out amazing! Can’t wait to see what you make next!

@Geordiecrafts 2 года назад

Thanks so much! I already have another project in the works 😊👾

@eBiCrafter 10 месяцев назад

Fantastic, thanks for sharing

@blaarghwee 2 года назад

Yes! An extremely time consuming, realistic tree method. I'm in =D Any advice on the paint job for those without an airbrush?

@Geordiecrafts 2 года назад

Glad someone else likes time-consuming projects like I do! Haha As for painting without an airbrush. Hmmm, maybe you could dye the hemp fibers green ahead of time and paint the trunk brown before assembling. Then give the tips/tops of the branches a dry brush in a yellow green color for highlight and new growth.

@blaarghwee 2 года назад

@@Geordiecrafts Oh definitely. "Where do you find the patience?" Whatdya mean? Time kind of disappears when I'm crafting. Anyway I've bookmarked your video for now. This happens. I find something cool and get excited. Then what I was working on goes "but.. what about me?" *ahem* us.... Ye, okay. But look at this. It's so awesome!

@carmium 21 день назад

Something new! I've never twisted two-wire branches and you've really captured the look well. I was doing a set of canyon dioramas for a local park a couple of years ago, and had to settle for many $ worth of Heki "Christmas trees," trimmed to shape with scissors and sprinkled with ground foam. It was a demo of what you say about different methods when you need a forest worth of trees! I have a personal project under way now, and may just have to have a go at your method! May I ask where the suspension bridge in your intro photos is?

@Debble 9 месяцев назад

200% for 5% yess that is the kinda deal i need

@Geordiecrafts 8 месяцев назад

My kind of person! 😅

@metalor696 2 года назад

A very nice time.

@echodelta2426 2 года назад

This tree is awesome and well worth the time that it took to make. Just found your channel thanks to @Knarb Makes.

@Geordiecrafts 2 года назад

Thanks so much! 😊 I'm super grateful to knarb for sharing my channel!

@echodelta2426 2 года назад

@@Geordiecrafts Also subscribed and went back to check out some of your earlier posts.

@Geordiecrafts 2 года назад

@@echodelta2426 aw thank you! I really appreciate it!

@Katoasapun 2 года назад

I spend a lot of time thinking about what method to follow and I think I have seen most pine trees tutorials on RU-vid and this one makes it look easy while getting that realistic look. As well as putting emphasis on it being a time consuming project! I want to try this myself

@Geordiecrafts 2 года назад

Glad you like it! I've tried a dozen methods and some of them are actually pretty darn good, but I was never completely satisfied with the result. I wanted to try and squeeze a bit more realism into my trees. I also love taking my time on the details of my dioramas. In fact sometimes the tedious tasks are my favorite part of crafting haha.

@TheHobbyGrotto 2 года назад

Nice tree! A sometimes forgotten but iconic piece of wargaming terrain!

@Geordiecrafts 2 года назад

Thanks so much! and I agree! It's often overlooked, but putting some intention behind a few of the more front-and-center trees can go a long way!

@fionasimagination 2 года назад

very cool! thank you for sharing!

@DungeonMasterpiece Год назад

Stunning

@Geordiecrafts Год назад

Thanks so much 😊

@hardiwb Год назад

what's the traditional method look like?

@Geordiecrafts Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9wdSKMOV8dY.html

@beaker8115 Год назад

Have you ever thought about using a static grass applicator with coniferous trees?

@Geordiecrafts Год назад

I've used that, and many other, methods in my tree making journey haha. The result is pretty decent and if I had to make a lot of trees for a big layout I would probably use the flockbox and static grass method. But for those front-and-centre "showpiece" trees I realy like this method here (as tedious as it is haha)

@beaker8115 Год назад

@@Geordiecrafts It's definitely worth it!

@ALEXforLOVE 5 месяцев назад

My usual source of inspiration is GROVE DEN but this is a fantastic starting method.

@CajunCraftastrophe Год назад

So very good! Thanks Geordie, I needed some tree advice for some upcoming projects. Fantastic video all around!!!

@Geordiecrafts Год назад

Thanks T-Nu! It's a doozy of a process but it turned out pretty alright! Let me know if you have any questions 😊

@CajunCraftastrophe Год назад

@@Geordiecrafts It turned out much better than alright. : ) I'll hit ya' up if I run into some snags. Thanks and cheers!

@WinstonSmithGPT Год назад

That was terrifyingly instructive. I feel like ChatGBT could make a gorgeous tree following this video.

@normanrowe2831 Год назад

Hi. Well done. These would make great foreground or hero trees. Any trees behind them could be less elaborate. I will check out your vids for less hero like trees. Lol. See ya.

@PilgrimofMatter 8 месяцев назад

Amazing! Totally worth watching. Thanks for sharing. :)

@Anubis30224 Год назад

Instead of Plumbers Hemp, you can use Hemp/Flax roving, which can come in different colors to help save time

@bretts7029 Год назад

OK. You've mentioned Boomer Diorama (the Grand Master) so I had to subscribe....great looking fir tree and video btw 🙂

@JamesPecora 10 месяцев назад

Terrific job. What scale would this tree look good in? Thanks.About how many holes would you say was on this tree?

@stevedrake360 2 месяца назад

Fantastic tree! You mentioned the scale in millimeters. What scale would that be for model trains? O, HO, N, etc.?

@DieterGawehn 8 месяцев назад

Thank you for this video. I copied it. And looks almost like your tree. But it took a very long time. The second tree went faster. Many greetings from Germany

@myrrhis01 5 месяцев назад

This is beautiful! I am currently tasked with making scenery for my mother's nativity scene, and I think a variation on this would work to craft some cedar-y or cypress-y looking trees. Since I expect they would need to be fuller, I am thinking about using a larger diameter dowel so the holes for the branches don't break the trunk.

@Fafmagic Год назад

Oh man... I hate reshaping our xmas tree with only 12 branches so this would totally finish me off. Great video though.

@nicolastousignant9160 Год назад

CANADA! fantastic tree, i'll have to keep this technique in mind. It really does pruduce a great result!

@СергейДубоделов-ь8э 7 месяцев назад

Супер. Вы молодец. Спасибо за нереальный мастер класс

@blackcattrucking4907 9 месяцев назад

That's a beautiful tree! How long does it take you to make one of these? I realize that you are practiced at it (obviously) but I'm still curious. Thanks for sharing!

@sevencoloredmage8726 Месяц назад

You didn't exaggerate about it being tedious. But the result looks really good.

@DAzOPOs 2 года назад

Love it! Looks so realistic!

@Is_This_Really_Necessary Год назад

I've seen a lot of tutorials on how to make conifer trees, and though many of them look great yours is by far the best one.

@garfieldirwin Год назад

Way too perfect. Need some missing, bare and brown limbs.

@JamesPecora 10 месяцев назад

Hi Geordie, What a terrific tree. I am in o-gauge modeling. I am currently trying my hand at this tree. I have put shorter wires on the top, and longer ones going down the tree and then a little shorter ones on the bottom. I am waiting for the hemp to come in. On your tree ,you are cutting 1 inch of the hemp. What length do you think I would have to cut for o-gauge? My branches go from 5 in. on each side ,down to 2 in. Thank you and keep up the magnificent work. By the way my tree is 16 inches high.Too short for o-gauge?

@albertofranchi6408 Год назад

SUPER TALENT