My neighbor laughed at me when I said I could remove the haze in 1 second!  

The cheap ones are not coated.

​​@@duudsuufd lmfao dude didnt say a single thing about then being oem clear coated my guy, reading comprehension is key here

you said this way nicer than I would have @@moneybilla

Yes! Then no more "monkey hammered solar crap"! 🤣🤣🤣

​@@Fee.1same thing I'm wondering 😅

Just like painting nails 💅. If you don't sand them first, the polish doesn't stick very long.

In other words do both.

There isn’t any dust on them. It rains almost daily here.

@@TheNavagePatch Ah, ok, thank you for that.

If they wiped off the dust, they would have never gotten hazy. 😅

​@@platoniquedust doesn't cause plastics to go hazy

​@@platoniquelooks like hard water residue to me. Cleans of with vinegar

Not to mention the damaging overspray to EVERTHING within 3 feet of the solar light!!!!!

exactly

I used wd-40 and it still looks wet.

​@@gbaker9295yes, and WD 40 works great on windows too.

Imagine if you shelacque dirt to the surface.

YES! My thought as well! @@dudere

This guy definitely is trying to plow this woman

😂

🟡Tip: replace the cheap rechargeable batteries inside with…. Any other rechargeable battery. They’ll be far superior.

Lmao cackled

I don't recall the movie, but there was a strange neighbor it was... This crazy neighbor would play a guitar and sing in her yard. When asked about it, she said to ignore him because he actually enjoyed working on her flower garden. Fair exchange, I guess?

I swear, this new kind of ads...

I was thinking that, too. It's pollen season in Florida; if you don't clean off the neon yellow gunk first, no way will paint stick. 😊

Exactly! 😅

😆🤣🤣

😂😂😂😂😂😂😂😂😂😂

Yeah and they can't forget to record it and upload it to social media to get more kindness points. 😊

I did this once while house-sitting for a friend, their place was horrifying

I wish my neighbor would do that! 😂

I wish my neighbour would do that too…

A woman in wetlake Ohio used to do that actually. She would break into people's homes and clean then leave them a bill with her name and number on it. She said did it all the time until she was charged with felony burglary.

I was thinking the same thing!

💯

Would it be fine to do preventatively when new?

@@LeisureLizard that was my thought, spray the panels before you install them into their permanent home.

@@LeisureLizard , I say yes

a little lacquer overspray isn't going to hurt the plants

^ exactly. But dog urine will definitely kill your plans. I don’t see anybody wiping down their plants after dogs use it as a WC.

@@cameronblack8043 maybe not for my own, but if I did it for a customer life's gonna fuck me. Lol And it will hurt them, especially if it's a hard plant to grow in the first place. Don't paint your plants...

That would be my luck, I'd fix the lighting but destroy the flowers. Lol.😅

@@lynzki657 way she goes. Makin more work always sucks.

Now vinegar I have!! I’ll try it😀

​@@judithhileman-lj4ljGet some headlight coating spray and give the solar cells a small spray when you buy any new ones. 👍

Yeah go ahead and pour vinegar on metal. There won't be anything left 😂😂😂

​@@whatsthechannelnamex Vinegar is a mild acid in a very diluted dose. It's fine to use on metal.

Sounds like the contrast between NYC & Westchester County

if youre in america defintely look up elwoods organic meats. it's a niche market but really great produce

Around Where did u move that ur neighbors have bees?

That's how it should be

​@@mr.smitty1804 Amen to that!

Is it made for cleaning cars headlights?

@@MrAsifhu82 Yes, it comes in a kit with an abrasive pad and the clear coat spray.

​@@aaronpreston47 Thank you! I was just thinking today how to get mine clear again.

can i use that on my car headlights?

The uv blocking properties of the spray might prevent the solar panel from absorbing

I thought the same thing! It's great that they LOOK nice; doesn't mean anything!

…..😂. That right there

She? Kim is his Asian Male neighbor*

@@nekkoskrilla6750 she jinping*

@@SniqrsFFAComedy!

that is discoloured plastic, not crap ontop. The lacquer restores the color and provides a coat.

​@@JunkBondTraderIt looks like these were cleaned first. There will definitely be a layer of dirt on things that are sitting outside 24/7.

​@@JunkBondTraderlacquer does not restore color. He is sealing in whatever is underneath.... If you do not remove the top layer, which is discolored plastic, it will show through after drying. This is being lazy trying to make something look easier than it is... it needs to be sanded before coating to be done correctly.

​@@JunkBondTraderlooks like dust on them, to me

​@JuanSumChninezeFue looks like deposits from water sprinkler system.

Do you think that this would work on headlights?

​@@sonnylawrence-road-angelIt does, done it to mine. Just get some like 200-3000 grit wet sandpaper to prep with to get the worst of the scratches out first

EXACTLY!!!

Or just clean it. Nothing else.😂

It's fine man lol

As inexpensive as those lights are it would be cheaper to just replace them.

@@mynameishuman4582 this is the mentality that contributes to our overflowing landfills. To each his own, i guess.

​@@mynameishuman4582 your thought process (mindset) is a world problem 💯🤦‍♂️

Thats way to harsh of sandpaper. Go with 1000 then 2000 grit, then use a proper UV coating from someone like Mothers made for headlights.

​@@JoeZelensky I was just about to say this after restoring some headlights and starting with 220 grit and working my way gradually up to 2000 grit

I do too! I have my kids do it because it's "labor intensive".

How exactly? Do you clean them first?

Yes. I pray this kindness grows into a new trend. "It's cool to be kind!"

It's awesome to see people making obvious comments without adding to the conversation too

Ask first. It dose not need to be without consent. And if he would not give consent then it should not be done. its kind to impose your will on others and make a for profit vid. he used them. i recent act of kindness I experienced yesterday was the the air-conditioner repair man arrived unannounced and the neighbor wanting to help them into my house tried all his keys on our door and omg one of his old keys to his old house fit our brand new dead bolt. And to be kind let ppl into our home when we are not home withut our consent. We have 2 indoor cats and the AC ppl dont know or care so they left the doors open. thankfully one of them was a lazy guy who just sat in the doorway picking his nose. that's probably why the cats didn't run out instantly. thank god the house keeper arrive a few min later she also dose not have the key and she was able to yell at ppl and secure the cats in the house and call us that somebody had opened the door and let these ppl in. I will say that we had called the AC guys but they said they were to busy and would call us to schedule a time. I do have security cameras and that's how I know what happened. It could have gone bad these ppl could have been thieves the cats could have got run over or lost. we got lucky this time no thanks to random kindness. basically if it not to save a life or stop a disaster stay out! if you see water poring out under my door yes please shut of the water and leave a note, if you see smoke call 911, if you hear screams for help please come in. the feeling of violated space far outweighs the thanks of have function lights. and btw the spay clear coat is short lived. Well have a great day I have said way too much I'm still heated about yesterday.

That would have been hilarious if the vermin cats got out! I bet the dude picking boogers wiped them on your door and walls! 😂😂

it's not trespassing if you're a welcomed guest, even if not specifically invited that particular time... it seems blatantly obvious that the neighbors are quite friendly with each other; ergo, there wasn't any trespassing

Why is that? How come it’s only temporary? Also, how would you clean them properly?

@@JohnWick03 It's just the elements. Ultimately, all you're really doing is filling in all the little marrs and cracks with gloss, which is why it appears to be smooth and clean again. But since the chemical makeup of a headlight lens and gloss enamel are comprised of different molecules, they'll never actually bond into one covalent piece. So as humidity, heat, and the wind starts to have its effect on the gloss, it will start to detach itself from those little burrs and cracks. And I didn't even mention UV light, which turns all finishes yellow over time. The only real way to clean your lens is to hit it from the inside as well as the outside and never use fillers.

@@LeviBulger interesting, thank you very much.

Maybe so. But it will increase the usefull life of them. The thing to do is wetsand them with water and a fairly fine wet/dry sand paper first.

@@LeviBulgerhit it from the inside and the outside… that advice sounds amazing

Thats way to harsh of sandpaper. Go with 1000 then 2000 grit, then use a proper UV coating from someone like Mothers made for headlights.

Yeah I’m of the mind that you didn’t do me a kindness, you just added another layer to sand off. Do it right or not at all. 1000, 2000, 3000, plastic polish, UV protection clear coat.

​@@JoeZelenskyyeah can you imagine how many have fooked their lights up with that harsh grade, also use wet n dry, no need to go beyond 1000grit as well.

Use Dawn Dish Soap - you need to wet it..put the Dawn on..scrub a little. Might need to let it set for awhile before rinsing off. lol...I let it sit one time and forgot to rinse it off. It rained and it was clean with no rinsing! Works good.

I use diatomaceous earth.

Kitty litter and Dawn Dish soap. 🙂

Brake cleaner works, too. Lol

🙌

Would have made those rose flowers shine like new :D

Make sure you do it without letting anyone know

Will this work on headlights too?

​@@clarkatyI just thought the same thing 🤷‍♀️

I don't think everyone thinks of it.

the spray says uv resistant, suely it cant be resistant?

Liar

@rickmassey1272 excuse me? Are you serious or do you have some kind of mental health illness??

​@Cassieskins21 the type I use is krylon uv resistant clear satin. I use it on my paintings as well.

Im sure they know each other and are friends, this aint no poor neighborhood

He took it out when it was close to the roses

Lol. 😂

That's his own house 🏡. No one does that !!!

​@@ankkaproductions5822I know my neighbors also very well amd I still don't want them coming over to do anything unannounced

🤣 god i hope this is a joke comment

😂😂😂🤣🤣🤣🤣🤣best comment

😂😂😂😂😂

😂😂😂😂

😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂

Me when they trying to make me take off my swimshirt

But be extremely careful with break cleaner. Not even chemists use that for cleaning. Extremely toxic.

​@@SahnigReingeloetetmechanics use cans of that a day.

Chemists: "We must use extreme caution with this substance, it could be lethal." Mechanics: "IF IT WORKS, IT WORKS. NO QUESTIONS!"

Hydrazine is an amazing cleaning solution that also requires great care😅

@@Blitzkrieg_Wolf 99% of the time when mechanics use break cleaner, cleaning alcohol or benzine would‘ve done the trick as well. People are just lazy and are not aware of how dangerous this stuff is (it leeches through gloves and skin and gives you cancer).

😂😂😂😂

Just spray it on the grass and sidewalk instead

And ignoring that for the last one and spraying it on the evergreens

​@@yongyea4147the grass is getting mowed. It won't mind 😊

Yes, but the batteries and the can of clear coat costs more than new lights. 😊

​@@americansfirst1095 Okay but why keep buying something and just throwing it out to buy new ones instead of doing repairs? That is just so wasteful. Do you buy something to just throw it away every year and buy new ones?

@@dontworryaboutit4255 ....I never said any such thing about throwing anything away. I've been repairing them for many, many years......... and what I said is true.

@@americansfirst1095 My bad. I thought your comment was just pretty much saying you'd rather throw them out and buy new ones every year

@@dontworryaboutit4255 .... i gotcha. Just buyimg these things, using, then, dispising of them is incredible. I grew up when we fixed/repaired toasters, lamps, clpcks, wrist watches, bicycles, etc.....everything!

Was going to ask if this worked for headlights. Will look for Maguire. Thanks!

@BobbiGail maguire makes specific polish for headlights.. as long as they're just discolored it does amazing. If they're pitted the thing to do is wet sand them and spray them with 4k clear coat.. it's called maguire plastx

the comment I came in this section for thanks alot you guys 🤗

Can you buy Maquire at home depot or Lowes?

And polluting the ground and air

in florida it never gets that far thanks to our stand your ground laws

Some random spooning between them ended the litigation fast

“With the money and time we’ve saved, we can now afford the attorney”

He don't live next to Karens house. 😂😅😂😅

That would be way cheap

But does it take 1 second?!? 😂

The spray treatment will peal.

Its plastic oxidization that causes the film to develop. Alcohol will remove the lose oxidized plastic and make it look ok but will actually contribute to making it oxidize faster. Cleaning it well to remove lose debris, sanding to expose a non oxidized layer, and then clear coating for protection is the actual fix. Without a clear coat the problem isnt solved its just postponed. Exactly the same as on headlight lenses, or even your cars paint job.

​@@squidvisdont forget its also labor intensive.

same with TT!

RU-vid university! I've completed so many handy man and mechanic tasks just watching RU-vid videos. Saved a small fortune that's for sure!

It's your water it's hard..

Me too….

Spraying with lacquer ❓❓

How long does it last?

​@@Cali_Oasis_GardenI did this last year and it lasted for the season

I’m literally digging thru the basement storage closet cuz I know I put some in there a few months ago!!!😂

🙌🙌🙌

What is the UV protection name, and where is the best place to find it? Plz....?

I've heard from several reviews/videos that the Sylvania headlight restoration kit is also excellent. It includes a clear coat to lock in the shine.

@@Phoggbank I couldn't speak to that because I've never used the Sylvania kit. I'm just speaking from my experiences, and what has worked for me in the past. 🤷‍♀️

they eventually throw it away too lol . everything eventually goes to the trash. is the earth really going to turn into wallE movie?

​@@ArtOfTheWeldeventually yes, but it did get used for awhile longer

So that's what happened to the bicycle i was going to throw away when i realized it was unsafe to ride. Obviously joking thete but honestly i don't recommend giving other people's children..other people's garbage. You never know why something is being tossed.

​@gizmogremlin1872 some would repurpose into landscaping decoration trellis

@@wilsonk1464 The reason I responded to this specifically is in the past I have thrown away a bicycle that had brakes which only... kinda worked. It was a cheap bike that I didn't feel like fixing, basically if a family received this bicycle as a random act of kindness, they wouldn't be aware of the problem and somone riding it could get hurt.

You didn't notice the dirty panels?

@@usa5439 he said he’s tried cleaning them but it didn’t help. The whole fixture is black so he probably didn’t think about them getting hazy

gives new meaning to lazy hazy summer days 😉

That garden edging looks like monkey hammered crap too. Lol.

​@@gdan9923the batteries stop taking a charge after couple years tok

Thank you!😊

@@TheNavagePatch 👍🏻 You're very welcome.🙂

Does the lacquer stay clear for minutes or months ..? 😮

​​@@Naoj2024No. It will look worse than before in a few weeks at best. This guy literally just damaged people's property and then hired a bot company to make "wow so helpful" comments to promote his YT channel

​@@krippkeeperAnd could be charged for trespassing and vandalism. 😂

I usually just say "Chinese garbage"

Really? It was part of mine back in the 90s but I got tired of it

@@juliebraden6911 Where did the phrase start?

Unfortunately, this hack isn't one of them.

Unfortunately, in my experience, Karens outnumber the good neighbors (or is it just towards me?)

Thanks!

Thank you! 👊

​@@TheNavagePatchi wonder if you can use this on foggy car headlights?

Too lazy to use a wet sponge and rub? I'm sorry for the plants and animals where you guys live.

THANK YOOOU. 🖐🏼🙂

That's helpful thank you 👍

Anything oily, even cooking oil will work. Anything is better then sealing them in with laquer.

Curious where you got yours, that sounds very pretty!

@@tammytrew7256 Temu

Hahahah! I feel for you, had neighbours like that myself once.

You should be more accepting of inter-racial relationships

Be one

If you buy me the house next to yours, I'll be an excellent neighbor! 😉

I was wondering what else is he sneaking in? LOL

😆🤣🤣🤣👍🏽😆😂!!!

oh yeah lol he sprayed right by it too in the wind. In fact it looks like it got all over it in one shot haha.

I only have clear gloss, but I'm gonna try it anyway

Aren’t you just lacquering the haze on???????❓❓❓❓

@@wendyrodriguez5375 I washed the top of my UV lights yesterday with a wet rag and once dried I sprayed the clear gloss and it worked great. They look brand new

​@@wendyrodriguez5375I'm glad I'm not the only one confused. That is covering the haze but not actually removing it. Im guessing? It's cosmetic. I thought he was using something that kept them clean

​@@johannacundiff9764 Much of the haze is actually tiny scratches. When you cover them with something like spray enamel or clear nail polish, it fills in the scratches.

It does not. It merely restores the plastic to a clear state and allows more sunlight to reach the sensor.

​@@TheNavagePatch Wow, who knew? So happy about this tip! I have thrown out many bc of this.

@@TheNavagePatch interesting. I’ve read that UV inhibitors in paint can affect solar panel output but never looked into lacquer. With this theory one could easily restore an entire array with just lacquer! Nice

Would this work on clear vehicle lights??? Hummm... might give that a try!

@@rhondahambright4295 I would try regular toothpaste on a cloth and buff it on the headlights.

😁Absolutely!

Not really could use the mouth just may come with a little flavor

If it is UV resistant won’t it not let the UV light through to power the solar cells??! 🤯

Nothing like doing it right!

That’s exactly what he showed. Before-gunky / After-clear

​@@kenigma79it would have been cool if he showed before and after of the lights operating at night so we could see the difference in charge

What is ben Matte?

@@alynunez4421 Tung oil

​@@alynunez4421What is a search engine ?

Why not?

I think I saw somewhere that there is UV resistant lacquer.

Then what do you do?

@@franzinefr Don’t have a solution, I don’t use solar lights. I wired mine directly into my home so I don’t have to deal with solar. All I know is that lacquer will chip, crack, and haze.

Yep. It’s just like a poorly done 1 coat paint job. Especially when you don’t even prep the surface first

You can save them, the 3 dots on the top is a pull down menu.

@sarahl2481 When there’s a tip or something that I want to keep so that I can come back to, I line it up just right and then I take a screenshot of it!! Didn’t know if you had thought about doing that or not! And then in your photos, you can make an “Album”and label it for your RU-vid screenshots! Do you know how to move a photo from your main photo Album to one that you have created? If not, reply here and I will try and help you with it, if it’s something you want 😊

​@@deniseferree279If you like the short, it will save it to your library under liked videos.

@@CreationsByCharI have forgotten how to move pictures from one phone to another.😊

Psst... it'll be back to looking the same once it dries or a month at most