My Pelican Catch Mode 110

Просмотров 27 тыс.

% 357

Just a overview of my pelican catch mode 110. Just a walk around of how I set up my kayak and what I think about the pelican kayak.
Scotty 0133-16 Well Nut Kit, 16 Pack a.co/d/i89RQUH
Propel Paddle Gear Rubber Boat Paddle Holder Clips | Quick & Easy Mounting | Heavy-Duty Rubber Construction, 1.5in | 2-Pack a.co/d/g8ZMtvU
Pactrade Marine Adjustable Straps Black Gray Textilene Mesh Fabric Upright Deluxe Lightweight Kayak Seat Foldable Canoe Cushion Aluminum Frame Sit On Top Fishing Canoeing Boating Kayaking Rafting a.co/d/hg2Wdpe
MARINE BOAT BLACK PLASTIC DECK PLATE 4"D WATERPROOF INSPECTION BAYONET TYPE a.co/d/gVYk1D7
MotorGuide 8M4000954 Trolling Motor Power Receptacle, 2-Prong 12V, 24V or 36V Trolling Motors, for Bow-Panel Installation a.co/d/gIwM9G3
Attwood 8M4000953 Trolling Motor Power Plug, 2-Prong, Connects With 12-Volt, 24-Volt or 36-Volt Motors a.co/d/iZlCX6P
SPARKING 2FT SAE Socket Sidewall Port - Solar Panel Mount with SAE Quick Disconnect Universal Flush-Mountable Connector for Solar Generator Battery Charger with 8 Mounting Screws (SAE Cable) a.co/d/2LT3AnG
HiUmi Adjustable Black Fishing Rod Holder for Boat Kayak Swivel Side Mount Kits Tackle (2) a.co/d/8Z5uqQi
Garmin Striker Vivid 7sv, Easy-to-Use 7-inch Color Fishfinder and Sonar Transducer, Vivid Scanning Sonar Color Palettes (010-02553-00) a.co/d/7KES0ue
YakAttack Fish Finder Mount with Track Mounted LockNLoad Mounting System a.co/d/3ZhZSQa
YakAttack BlackPak Pro Kayak Fishing Crate - Multiple Colors and Sizes | Kayak Fishing Accessories a.co/d/bR0yhKQ
Power Wheel Adapter Battery Adapter for Dewalt18v-20V Battery Dock Power Connector 14 AWG Robot Power Convertor for DIY Ride On Truck, RC Toys and Work Lights Replacement for DCB205 DCB205-2 DCB204 a.co/d/5yaaB13
12V/24V Fixed Thread Cigarette Lighter Socket Extension Cable with Perforated Terminal, Direct Battery Type, car Cigarette Lighter Adapter. 14AWG 20A Heavy Duty Cable 10FT（Free Two Blade fuses） a.co/d/7aJ6EJM
lakesidemarineandservice.com/products/minn-kota-power-drive-depth-collar-kit?currency=USD&variant=14060753584194&Google%20Shopping&gclid=Cj0KCQjwt_qgBhDFARIsABcDjOd2zaK9G0YkIacLZ-Hjjd7Le06mB0qWD7NpdAIaiBbzwtRMPJuehoIaAt4uEALw_wcB
lakesidemarineandservice.com/products/minn-kota-power-drive-v2-drive-housing-assembly-2771826?currency=USD&variant=14060470534210&Google%20Shopping&gclid=Cj0KCQjwt_qgBhDFARIsABcDjOcHuot805B85DsmvnjAMVmJteAXEyoCSmfnil-CqU7zwM982F7pcJAaApiuEALw_wcB
ECO-WORTHY Heavy Duty 330lbs Solar Tracker Linear Actuator Multi-function (12V, 8") a.co/d/5JSd1CR
lakesidemarineandservice.com/products/minn-kota-quick-release-bracket-1854035?_pos=6&_sid=5c1c0e32e&_ss=r
battlebornbatteries.com/product/12v-lifepo4-deep-cycle-battery/?gclid=Cj0KCQjwt_qgBhDFARIsABcDjOdGImPlL1Hh8pkTk9tC3AQfxWxMcGKjy6ysGJ4R9DbxjTR8FWXuEgcaAnjuEALw_wcB
Minn Kota 1352230 Endura C2 30 12V 30lb Thrust, 30" Shaft Transom Mount Trolling Motor www.walmart.com/ip/15686718
pelicansport.com/products/kayak-catch-mode-110-mif11p102-00?variant=40484800987341&currency=USD&gclid=Cj0KCQjwt_qgBhDFARIsABcDjOczQD9JQt8or794JxTyeYzHw2gMf7GUmKxlEY3ynG3SHCPhDYDtcF0aAvoxEALw_wcB
IndusTec Wired DPDT 20 Amp 12 Volt (On)/Off/(On) DC Momentary Reverse Polarity 12V Toggle Switch Automatic Reset 3 Position 6 Pin Quick Plug a.co/d/1BXcL8Y
Minn Kota Foot Control 5 Speed Switch Knob - Newer Version 2280110 a.co/d/1VxYnTh
Forward and Reverse Relay Module for Motor/Linear Actuator, Reversing Relay Module (DC 12V) a.co/d/9ukxWCV
1pc Joystick Switch, 2 NO Bidirectional Reset HKA1-41Z02 2-Position Return Momentary Joy Stick Switch a.co/d/fXosQvo

Опубликовано:

26 мар 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 118

@meroski21 8 месяцев назад

this video is literally legendary status. this is incredible

@ARKAYAKFISHING 8 месяцев назад

Thanks! I really appreciate that! Hopefully this video has inspired alot of pelican owners out there.

@meroski21 8 месяцев назад

Not a pelican owner but your ideas/reviews and that motorguide thing is sick!

@ARKAYAKFISHING 8 месяцев назад

Thanks!

@skott1800 Год назад

Hands down best motor setup ive ever seen. Well done man

@ARKAYAKFISHING Год назад

Thank you Sir! Happy fishing!

@playpool12fyao Год назад

This is one of the clearest setup. Awesome job.

@ARKAYAKFISHING Год назад

Thanks!

@kodiakjack88 Год назад

Love the set up man! Would you be willing to do a more detailed video on your power drive setup on the motor? Been looking at tons of videos for ideas for my own and yours is by far the coolest and most functional. Subbed!

@ARKAYAKFISHING Год назад

Thanks I really appreciate that and the sub! Yeah I plan on putting a more detailed video together going over the trolling motor setup soon. Probably in the next 2 weeks.

@jimmycross5675 2 месяца назад

I’ve been looking at that same kayak for a couple months now trying to decide but after watching your video I believe I’m sold on buying one and definitely going to set me up a trolling motor setup just like you have when I get my pelican and for my jackson 360 angler really cool video liked all the cool setups ya have on yours

@ARKAYAKFISHING 2 месяца назад

Thank you Sir! 👋 I've really fell in love with this kayak over the years. It's just a really fun kayak for the money. I stand fish in it all the time now with the foot pedal setup. Super stable for a 10 footer. Drop a comment when your done. Love seeing other people's builds. Happy fishing! 🎣

@mikesanders1243 4 месяца назад

Nice job everything makes sense. Just bought the Pelican 110 today.

@ARKAYAKFISHING 4 месяца назад

Thanks! Nice! How do you plan to set yours up?

@charliemcabee4123 Год назад

Great review. I love mine even though I have no where near the mods you have. Hopefully in the future add ONS will come. I have made a brkt. and have my trolling motor mounted on the side. Thanks for all your ideas and expertise. Fish on !!

@ARKAYAKFISHING Год назад

Thanks I really appreciate that! It seems like the add ons never stop do they lol?! I've seen alot of people doing trolling motors like that. Seems like a good and simple way to add a trolling motor. I couldn't imagine doing without a trolling motor after having one for so long. Good luck!

@teotwawkitommy01 Год назад

The motor install was really slick!

@ARKAYAKFISHING Год назад

Thanks!

@tonyperic Месяц назад

Thank you for taking the time to make these videos. Your set-up is amazing and inspiring. Just purchased the carch mode 110. Ordered a lot of parts but debating on your front mount option. How is the flex of the hull feel with the motor being upfront? Also, do you think the 30 is enough thrust for the Minn Kota? Or would you go higher? Again thanks for the vids. Your basically sold me on the 110!

@ARKAYAKFISHING Месяц назад

No problem Tony. Thank you for watching. I love the motor being up front. Just makes casting to spots so easy. The minn kota 30 is more then enough for the kayak. I've ran 45s and 55s before. 55s are just a waste of money and battery. 45s are ok. I ran one for over a year on this kayak. I liked it. Just overall like the 30 the best. The kayak hull handles it great. Hardly any flex. Overall these kayak are built really well. I've just been really impressed with the durability of it. Hope that helps. Appreciate your comments! Happy fishing! 🎣

@puffpuffpikachu Год назад

Wow thats impressive man . I'm just happy if I get the stock one but I might have to take your idea with the seat raised up to start haha

@ARKAYAKFISHING Год назад

Hay thanks I appreciate that! Haha I understand. Have to start somewhere. Raising the seat up is definitely a must. Good luck and fishon!

@jbard8180 11 месяцев назад

I was able to raise the seat 4" with 1/2" PVC T Joints, 1/2" pvc pipe, and a heat gun to get it on the seat base ends. I spray painted it black, used a little PVC glue and friction taped on the T joints on bottom. Works great and really inexpensive. It does make the yak a bit more shifty but added Scotty stabilizers so fixed that problem!

@FishLite 11 месяцев назад

outstanding job!

@ARKAYAKFISHING 11 месяцев назад

Thank you Sir!

@unknown-tr3gk Год назад

I've got the same kayak and exploring different troll motor options, but boy I wish I had the knowledge to setup something as handy as this

@ARKAYAKFISHING Год назад

Thanks! Glad you like the setup. I plan on doing a future video just over the trolling motor. Maybe it'll help some on how to build a setup like it.

@stevenicholls8490 9 месяцев назад

Love your ideas thanks for putting this out there, look forward to more of your kayak adventures. You have inspired me and friends to do the same 😊 Do you have the details of the joystick and steering device please

@ARKAYAKFISHING 9 месяцев назад

I really appreciate that Steve. Here's a link to 2 videos I think will be helpful on wiring everything up. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OWEDx0FcYIY.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OGKPriMe3LY.html

@JamesRichardson-wr1me 11 месяцев назад

Definitely wanting to do this just not sure I want it on the front or back. Would love to hear you suggestions. I have a Perception Outlaw 11.5.--just got to the end of the video...going with the bow mount...thanks for the info!!! Still curious about the weight though.

@ARKAYAKFISHING 11 месяцев назад

Hey thanks for watching and glad the video helped out. I'd definitely go with the front mount from my experience. The back mount is good if your just wanting to use it for traveling to where your going. But the front is best for traveling and fishing. The kit I built in the how to build it video weights 24lbs with a minn kota 45. Should work great on that outlaw. Good luck! Happy fishing 🎣

@JamesRichardson-wr1me 11 месяцев назад

One more thing...not finding the exact same aluminum channel that you used...Finding similar options but not the exact dimensions. I did not see a link to that one in the description.@@ARKAYAKFISHING

@ARKAYAKFISHING 11 месяцев назад

@@JamesRichardson-wr1me yeah that particular size is harder to find. You can use 2"×2" instead. It will just be a hair taller overall. Here's a link to some I found on ebay. www.ebay.com/itm/2-x-2-x-1-4-Wall-6061-T6-ALUMINUM-CHANNEL-24-long-Mill-Stock-Cut-New-/284948032242?mkcid=16&mkevt=1&_trksid=p4429486.m46890.l6249&mkrid=711-127632-2357-0

@maxcoatlhunter4322 3 месяца назад

Man I love this. Great video, great set up! I want one!

@ARKAYAKFISHING 3 месяца назад

I appreciate that! 👋 Maybe I should be a salesman for Pelican 🤣

@maxcoatlhunter4322 3 месяца назад

@@ARKAYAKFISHING you should or you should sell kayaks set up ike yours

@garyw8530 Год назад

Really glad I found your channel. I look forward to more videos.

@ARKAYAKFISHING Год назад

I appreciate that. Definitely be more videos coming!

@Offthegridfishing Год назад

Just got my 110 as first kayak and it better then my friends old town

@ARKAYAKFISHING Год назад

That's awesome! Really stable kayaks for fishing. Going to put a trolling motor on it?

@alexmarnoch870 Год назад

That was a great review! Thanks for sharing all those tips and tricks.

@ARKAYAKFISHING Год назад

Thanks! Glad you found it helpful. I'm always trying to share some tips and tricks that could make life alittle better on the water

@FishLite 8 месяцев назад

hey thanks for all the rigging tips... how did you step down voltage from 20 to 12 volt in you battery box

@ARKAYAKFISHING 8 месяцев назад

No problem. Glad you found it helpful. The dewalt 20v batterys wire to a cigarette plug. Then I used a belkin car charger. The belkin charger can handle 20v in and fast charge my camera batterys and phone like your vehicle would.

@natcoman 11 месяцев назад

super cool setup, sir.

@ARKAYAKFISHING 11 месяцев назад

Thanks! 👋

@Manuel_Z_Kayaks 10 месяцев назад

You've got at least $1000+ in the kayak, battery, Garmin & trolling set-up right? You might consider a PWM motor control because the switch from the troll motor uses way too much power at any speed.

@ARKAYAKFISHING 10 месяцев назад

Yeah switching to a PWM setup has been on my mind along time now. I'll probably do it when I put a new trolling motor on this kayak.

@davidtrent2440 5 месяцев назад

Now that you have used it for awhile, does the steering seem choppy or jerky, or is t=it smooth to operate? I love the set up and want to do this to mine, but was just curious about how it does with the joystick steering!

@ARKAYAKFISHING 5 месяцев назад

I wouldn't say it's jerky because it doesn't move that fast when you hit the joystick. At first it'll seem sensitive too someone that's never used it before. But you get use to it pretty fast. I wouldn't won't it to go any faster or slower turning. To me it's just right. I think you'll love it when you get use to it.

@ychan0378 Год назад

Badass setup! Mind sharing diy for the powered trolling motor control?

@ARKAYAKFISHING Год назад

Thanks! I have a detailed video going over the trolling motor setup on my channel page.

@dmatc Год назад

Great video!! Thanks for all the details. I have been wanting to do something like this and this helps a ton!! Do you need 2 relays (one for the forward/reverse of the motor and one for the up/down actuator)?

@ARKAYAKFISHING Год назад

Thanks! Glad I could help and thanks for watching. You can use the factory speed control switch inside the head of your trolling motor for controlling forward and reverse of the motor. You just need 1 relay to steer the trolling motor left to right useing the relay and joystick. I use the small switch to control the up and down of the actuator to lift and lower the trolling motor. All the parts are linked in the description. Hope that helps

@OldScorpion Год назад

That's a really nice setup you have

@ARKAYAKFISHING Год назад

Thanks

@traviszettler Год назад

Very nice setup! 👍

@ARKAYAKFISHING Год назад

Thank you Sir! 👋

@robertbutcher4201 Год назад

Sweet AF set-up

@ARKAYAKFISHING Год назад

Thank you Sir! 👋

@auser752 Год назад

Love that transducer mount location!

@ARKAYAKFISHING Год назад

Thanks! I was kinda afraid to put it there at first but glad I did. Works great.

@cayennemist Год назад

Really thinking about building this same setup!

@ARKAYAKFISHING Год назад

Nice! I think you'll be happy with it.

@jbard8180 Год назад

Wow 🤯thats an awesome setup! I have Pelican catch mode 110. I liked & subbed. You wouldn't happen to sell one of these units that you built would ya? Or at least aluminum parts cut & drilled? I don't have the appropriate tools to machine that aluminum properly. I'd love to put one together though.

@ARKAYAKFISHING Год назад

I really appreciate that! No I don't sell them but I do have another video that's very detailed on how to build it from start to finish. You don't need any special tools. Here's a link to the video. Hope that helps. Happy fishing! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OGKPriMe3LY.html

@jbard8180 11 месяцев назад

Going with a Cayman Haswing Trolling motor with Remote and foot pedal. I am mounting a quick release on the bow like you have done with yours. How did you fasten it so secure to the front? What bolts and rubber boots did you use? Where did you get the rubber boots? And also when you ran wires to the battery did you use a port or cable gland throigh the hull? Any advice is much appreciated.

@ARKAYAKFISHING 11 месяцев назад

@@jbard8180 I linked another video below showing how I ran the wires through the hull using a fiberglass flag pole. I used 1/4-20 grade 8 bolts to mount the quick release plate to the front. I got the 1-1/2 inch rubber boots off ebay. I just searched 1/4 rubber boots to find them on ebay. Hope that helps. Let me know if you have anymore questions.

@jbard8180 11 месяцев назад

@@ARKAYAKFISHING Thanks. Ill def check out the video. I already have the wire running pole kit from running speaker wires in my house. Ill get the bolts and boots. Ill shoot you an update on how it all turns out. Thanks again for all your help.

@ARKAYAKFISHING 11 месяцев назад

@@jbard8180 no problem anytime! 👋

@redfeather9581 Год назад

This guy should be working at Pelican.

@ARKAYAKFISHING Год назад

Thanks! That would be my dream job!

@Micscardetailing Год назад

Nice set up!

@ARKAYAKFISHING Год назад

Thank you!

@koda284 4 месяца назад

Why did you mount it to the front instead of the transom mount on the back that’s made for it?

@ARKAYAKFISHING 4 месяца назад

It's kind of a personal preference thing for most people. But also it gives you alot more control over the kayak in any condition. Especially in heavy wind and waves. Also if you control the front of the kayak you can easily control the way your pointing to where your wanting to cast too. I put a trolling motor on the back of my first pelican. And after a few weeks it went to the front. And that's how all my kayaks have been since.

@JamesRichardson-wr1me 11 месяцев назад

Do you know what the total weight of the whole motor setup, including the deck plate, is?

@ARKAYAKFISHING 11 месяцев назад

With deck plate is 25lbs. That's with a minn kota 45lbs trolling motor.

@lilguylures Год назад

When you did the wiring is there, no foam inside the kayak? I’m looking at doing something similar and wanted to know why I’m getting into

@ARKAYAKFISHING Год назад

No foam that I could see or feel. I drilled a hole beside the seat and pushed all my wires through at once from that hole to the front using a fiberglass flag pole and never hit anything.

@lilguylures Год назад

@@ARKAYAKFISHING awesome thanks for the heads up!

@ARKAYAKFISHING Год назад

@@lilguylures No problem happy fishing!

@70MikeMike Год назад

Do you have to operate it in reverse? I figured it would need to be turned around… As you are talking about it in the video now lol…

@ARKAYAKFISHING Год назад

No I run it in forward like normal. I just had it backwards in the video because that's how I keep it when it's not on the kayak. That way my propeller doesn't get damaged.

@70MikeMike Год назад

@@ARKAYAKFISHING I like your setup. I’m still trying to decide if I want to put one on my yak….

@ARKAYAKFISHING Год назад

@@70MikeMike I think you'd like it if you did. Makes kayak fishing alot more enjoyable. An opens up alot more water to you as far as traveling wise

@stevealarid2689 3 месяца назад

Pelican catch mode 110, do you think I can install a motor guide x13 on front or a minn kota bow mount??? Thank you for helping 👍

@chrisallen875 Год назад

Where did u get the steering switch control and Ty for a great video

@ARKAYAKFISHING Год назад

No problem thanks for watching! Sorry I forgot to add those parts in my description. I just linked the joystick, forward/Reverse Relay, and the switch I use to control the up and down Actuator to the video description. All the parts came from Amazon. Hope that helps out.

@stevealarid2689 3 месяца назад

I have a pelican catch mode 110 , do you think i can mount a x13 motor guide, or mini kota on the bow, if i cut a hole out, and remove the front handle??? Thank you for helping

@ARKAYAKFISHING 3 месяца назад

Hey Steve. Yes I know you can mount either one on the front. I'll link another video below that might help you out with that. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OWEDx0FcYIY.html

@stevealarid2689 3 месяца назад

Thank you , brother, am just wondering what type of rudder tube you use, to level out the motor plate the quick release motor plate, I figure I just need to drill that hole to get access underneath there and put big washers and little metal plate inside so it's real strong

@ARKAYAKFISHING 3 месяца назад

No problem 👋 I found the rubber spacers on ebay. Just search 1/4 rubber spacers. Mine are about 1 inch diameter. You'll want to order different lengths to get it level. I just used oversized washers on the inside. That'll be strong enought.

@stevealarid2689 3 месяца назад

@@ARKAYAKFISHING great deal !!! Thanks alot for your help, looks like real easy install, i just got too find the 4 1/2" round opening cover, so that rubber must be super strong 💪 ?

@stevealarid2689 3 месяца назад

@@ARKAYAKFISHING the 1 1/2" or 1 " spaces , i found them on eBay, i will have too find what ONE i need, happy bass 🎣

@josephbrickles5082 Год назад

What did you use to cut the hole for the deck plate?

@ARKAYAKFISHING Год назад

I used a 4-1/2 holesaw bit. You can get a holesaw bit kit at harbor freight pretty cheap

@josephbrickles5082 Год назад

@@ARKAYAKFISHING thank you sir

@steventwining1893 Год назад

Why are you mounting the motor on the front rather than the back?

@ARKAYAKFISHING Год назад

I like it that way because it gives you alot more control over your kayak. And makes it more fishable. Especially in tight places. And also makes it safer in heavy wind and waves because it doesn't try to push your front around. Where ever that trolling motor goes the kayak follows. I've had all mine on the front for years now and come to love it that way.

@TheKingclayton87 Год назад

How did you get free shipping?

@ARKAYAKFISHING Год назад

They had a promotion the week I ordered mine. You can get the green one on Amazon free shipping. They also sell them at academy sports if you have a store close to you.

@sheldonstone5685 Год назад

I just bought the same Pelican model yesterday at Academy in Benton. I’d like to see your rigs in person if you are willing. I have several questions. I live between Hot Springs and Malvern. I don’t know how we can make contact outside of RU-vid. I will understand if you turn me down…I probably would.

@ARKAYAKFISHING Год назад

Yeah I hate to turn another kayaker down but that's a good trip from me. Hate to see you drive that far. I can definitely help with any questions you have or I can make a video going more in depth on something.

@Offthegridfishing Год назад

What did you do with the chair

@ARKAYAKFISHING Год назад

Sold it

@Mass_bigbaits Год назад

I just bought this kayak hoping I’d be able to stand in it with the awesome open deck. The seat is way too low to stand from the sitting posistion. I’m just starting the video so sorry if you answered this question. Are there any mods to make the seat higher?

@ARKAYAKFISHING Год назад

Yeah I didn't like the factory seat hight either. Way too low. I bought a different seat and mounted it useing Paddle holders and scotty well nuts. I still throw a boat cushion in the seat for even more hight. I linked the seat I bought and scotty well nuts down in the video description. Good luck and hope you like the kayak.

@Mass_bigbaits Год назад

@@ARKAYAKFISHING yea I saw it. I might try and do the same thing. I’m a bigger guy and I don’t think I’ll be able to stand on it. I may just buy a bonafide and give this to my daughter. I loved how open the deck was. That’s what sold me on it.

@garywhite93 Год назад

I mounted a MotorGuide 46lbs bow trolling motor on my catch 130 HD without drilling a hole in the kayak. It's done so redneck but works good in the fast Detroit River

@ARKAYAKFISHING Год назад

That sounds awesome. I bet that 46lb moves that kayak pretty good