My Rusty 1980 Toyota Pickup Truck Long Bed(s) Build Intro

Подписаться 124 тыс.

Просмотров 23 тыс.

50% 1

Here is my rusty Ohio 1980 Long Bed Toyota Pickup Truck that I purchased for just $600! It has the 20R engine and an automatic transmission. It leaks oil, gas, brake fluid and trans fluid, and the body is extremely rusty, but I look forward to the challenge of a full frame-off restoration/build to get this truck back on the road!
Oh and I also shipped another 1980 Long Bed parts truck up from western Oklahoma, because you can't have too many Toyotas!
My other Toyotas (present and past)
1985 Xtra Cab lifted 4WD • 1985 Toyota 4x4 Off-Ro...
1994 JDM Toyota Land Cruiser VX Limited • Differences between US...
1987 2wd rusty frame • Abandoned 1987 Toyota ...
1989 4wd rusty frame • 1989 Toyota Pickup Tru...
1987 4wd very rusty frame • 1987 Toyota Pickup 4x4...
1987 4wd SR5 clone • 1987 4WD Toyota Pickup...
1987 Lifted 2WD rusty frame • 1987 Toyota - Lifted 2...
1986 1-Ton rusty frame • 1986 Toyota 1-Ton Pick...
1987 4wd Turbo Cab broken frame • I bought half of a Toy...
1986 4wd Rusty frame • Breaking a rusty Toyot...
More videos of this 1980 project:
Rusty 1980 Toyota Pickup Truck Long Bed(s) Build Intro: • My Rusty 1980 Toyota P...
1980 Toyota Long Bed Rusty Cab Floors: • 1980 Toyota Long Bed R...
More rusty floor repair (shorter version) • How to Fix a Rusty Car...
Cutting & replacing rusty rocker panel: • How to Replace/Fix Roc...
Removing the Cab: • Disassemble & Remove C...
Removing the engine from bare frame: • Toyota 20R Engine Remo...
Toyota 20R Engine Teardown: • Toyota 20R Engine Tear...
Removing the Bed: • How to: Remove the Bed...
Prepare and Paint a Rusty Frame: • How to: Prepare and Pa...
Update Suspension to install Drop Spindles on 1979-83 Toyota Pickup: • How to: Update Suspens...
Installing Steering Components on Toyota Pickup 2WD/RWD: • How to Install All New...
Install Street Edge 3" Lowering Leaf Springs: • How to Install Street ...
How to install Mini C Notch: • How to Install Mini No...
Remove 20R from truck: • How To Remove 20R Engi...
My used OEM Toyota Parts for sale: yota.6thgeargar...
I don't have Patreon or ask for donations, but you can support the channel with some rad 'Yota gear from my store: 6thgeargarage.c...
Instagram: 6th_gear
6thGearGarage
Some other Toyota videos you may find helpful:
Remove 1980's Toyota Pickup/4Runner Dash Pad Cover: • How to: Remove 1980's ...
Rebuild Front Knuckles: • How to: Toyota 4x4 Sol...
Restore/Fix/Repair a Cracked Vinyl Dash: • Part 2: How to Restore...
Remove Toyota Truck Rear Glass Window: • How to Remove Toyota T...
How to clean/Restore Toyota Pickup/4Runner Door Panels: • How to: Clean/Restore ...
Toyota Door Disassemble: • How To: Disassemble a ...
Rebuild front knuckle & replace birfield joint 80 Series: • Toyota Solid Front Axl...
Remove an Entire Toyota Rear Axle Assembly: • How to Remove an Entir...
Install/Upgrade to V6 1" Master Cylinder on 4 cyl Toyota: • How to Install/Upgrade...
Install Toyota Rear Axle Bearing, Oil Seal - WITHOUT a Press: • Install Toyota Pickup/...
Replace Toyota Drive Shaft Center Support Carrier Bearing: • DIY: Toyota 4x4 Drive ...
Trail Gear Hi-Steer install: • Trail Gear Hi-Steer in...
Toyota Pickup Fiberglass Bed Review/Comparison: • Toyota Pickup Truck Fi...
How to Properly Repair Rusty Frame: • How to Properly Repair...
Repairing Toyota Frame - Cut Out & Replace Metal: • DIY: Repairing Toyota ...
Fixing Floor and Rocker panel rust: • Fixing Floor and Rocke...
Remove Headliner in Toyota Pickup Truck: • How to: Remove Headlin...
Remove Toyota Pickup & 4Runner COMPLETE Dash: • How To Remove Toyota P...
Toyota 22RE Engine Teardown: • $100 Toyota 22RE Engin...
22r Compression Test: • How to: Compression Te...
Remove Toyota 22RE Engine & Transmission: • Remove Toyota Pickup T...
Toyota Pickup/4Runner Vent Window Conversion: • How to: Toyota Pickup/...
Toyota 4x4 Transfer Case Rear Flange Oil Seal Replacement: • DIY: Toyota 4x4 Transf...
Replace Pinion Oil Seal in Rear Diff: • How to Replace Toyota ...
Remove Door Panel: • How to: Remove Toyota ...
LED Headlight Conversion: • How to: Install Toyota...
Repairing Toyota Frame - Cut Out & Replace Metal: • DIY: Repairing Toyota ...
Breaking a Rusty Toyota Frame in Half: • Breaking & Cutting Up ...
B-Pillar Trim Removal & Install: • Toyota Pickup/4Runner ...
How to disassemble Vent Window: • How to: Disassemble Ve...

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@treenopie Год назад

Love the "E-Brake"

@JimsEquipmentShed Год назад

Love the look of the blue truck as it sits. I’d make it look like that, but with less rust……

@shannonboatright4894 Год назад

I say keep it original ride high .. and keep it all original if possible.. that’s my opinion.. enjoy your video

@6thGearGarage Год назад

The deeper I get into these trucks the more rust I’m finding!

@ClassicGBodyGarage Год назад

Looking forward to this build!

@AkiraBenJ 8 месяцев назад

This E-Brake OMG xD

@bob_frazier Год назад

Well I'll be darned! Congrats!

@GavincredibleAU2 Год назад

These crusty Toyotas could tell so many stories 😅

@walterblackledge1137 6 месяцев назад

I bought a brand new 1980 SR5 Long Bed (beige color) for $5,995. Great truck, simple to work on but a bit of a rust bucket from Illinois winters.

@6thGearGarage 6 месяцев назад

nice! Rust really is the Achilles heel of these trucks.

@j73stuart Год назад

i had a long bed 81 in college great truck.

@mathieuhenry607 Год назад

This is very similar to what I did a couple years ago. Had a low mileage 1984 3/4 ton 2wd long box with a rotten frame that I frame swapped and built up with a donor 1987 2wd. You don’t even need a hoist to remove the body, I was able to sling the cab and box off with a regular engine crane. I would recommend you try and find the heavier front sway bar from a 3/4 or 1 ton model for better cornering at highway speeds with a load on the back. The parts for these 2wd trucks are super affordable, and their really easy to put together. Your going to have a great time with this project! Let me know if you have any specific questions, would be happy to help out 🍻

@6thGearGarage Год назад

Thanks!

@Reidinsonmedia Год назад

such a nice truck i cant wait to see what comes of it !

@6thGearGarage Год назад

Thanks! I'm currently working on replacing the cab floors. This one will be a long video!

@tedbastwock3810 Год назад

Nice, can't wait, really looking forward to watching this series

@Working4nothing 3 месяца назад

Are you still running the original toyota driveline on your lifted truck. I jist bought an 89 that's running the stock trans and axles, but it has a tbi 350 swapped in. I'm just wondering how strong the trans and axles are. So far, they seem to be ok, but I haven't driven the truck much since its a bit of a project. Thanks in advance.

@drewfleming7065 Год назад

Did Toyota ever make the 20R with a points distributor?? If so would it fit a 22R?? (thinking EMPs)Tip on rear main seal leaks...I chased them for years (been driving same 1987 since 1987, 1/2 million miles) till I figured out its the seal retainer gasket 90% of the time...silicone them (I use Toyota black, easier to take apart then autozone RTV) and timing chain cover gaskets, also helacoil 12mm threaded hole on top on timing chain cover (bolt through the head under dist. gear) allows for a tighter bolt and no leaks there. Great price on the blue truck. the Weber is $350 alone...I run a 38mm, .50 lift cam, stroked, LCE stage 2 motor (cost more then your blue truck)...Went from 103HP to 160HP...blew up a G54 trans and 4cyl rear end...Found a R151F turbo trans (cost almost as much as your blue truck) and got a V6 rear end...Getting 17city and 19hwy mpg.....Get your parts store updated so we can help pay for your rebuild....

@6thGearGarage Год назад

This is my first 20r, I’m still learning. I’m actually surprised how different the first gens are from the second gen trucks. So far just gutting the interior has been a new experience for me. I’m excited for this build though… and I’m working on the store whenever I get a chance 😁

@retro_88yota Год назад

looks like the parts truck has aftermarket a/c. if you have any interest in keeping that and making it work let me know. I have a few different 22r compressor brackets and all the stuff requited to make new a/c hoses.

@6thGearGarage Год назад

It does, I just pulled the evap box out this week. IM not sure if I’ll put it back in yet…

@retro_88yota Год назад

@@6thGearGarage the evap box is the hardest to find part for these trucks. its very easy and pretty cheap to upgrade all the under hood components to modern stuff.

@professorjenkins6244 Год назад

I absolutely love this body style 🥰 out of curiosity, have you ever owned or worked on the diesel version of this truck?

@6thGearGarage Год назад

I have not owned any diesel Toyotas, as they’re pretty rare around here.

@professorjenkins6244 Год назад

@@6thGearGarage that’s too bad, there was one near me but I didn’t have the cash to fix it up. Neat little trucks imo 😎

@JimsEquipmentShed Год назад

@@professorjenkins6244 I’d buy that, even if I couldn’t afford to fix it up. ;-)

@miguelabrego8192 7 месяцев назад

I have a truck similar to yours, mine is 1979 al so is blue and I'm looking for the Heater Hose Kit in case you want to sell it.

@6thGearGarage 7 месяцев назад

I wouldn't buy a part like heater hoses used. That rubber is 40+ years old and not worth the headache of a possible coolant leak.

@jaymoar3561 Год назад

How many miles does she have? Sorry if I missed it in the video if you mentioned it.

@6thGearGarage Год назад

I think it's around 106,000. Or it could be 206,000 lol not sure, these odo's only read 5 digits.

@nateschin5187 Год назад

Do you have any interest in selling the cap off the white truck?

@6thGearGarage Год назад

Yeah, I would sell it. It's missing the back door though.

@marcomorales4637 11 месяцев назад

I got a 1989 Toyota pickup and I need parts like bed and fenders please if some one have parts please let me know thank you 🙏

@6thGearGarage 11 месяцев назад

sorry, I do not have any 89+ body parts.

@EduardoJimenez-tz3iy 8 месяцев назад

Donde se encuntra

@6thGearGarage 8 месяцев назад

Ohio

@lesklower7281 8 месяцев назад

If there is anything to do with Toyota utes l will click on it because l live in Australia and own a 1997 Toyota's Hilux rear wheel drive ute with the 22R motor and with a five speed gearbox mine is running driving and registered and four years ago l paid aud $1500 for it and no rust at all been Australia not much snow also it has an aluminium tray l see the ones from North America will rust because of the salting of the roads and many other older cars rust in the rust zone and Toyota spent billions of dollars replacing rusted chassis not in Australia l do like the 20R motor it's similar to the 22R motor just a bit less capacity to the 22R motor and 1997 was the last year of the 22R engine l am so happy to have one and it didn't appear in the Toyota Hilux until the mid 1990s as far as l know l will be interested in how your Toyota ute project pans out

@6thGearGarage 8 месяцев назад

The 22r will live forever, but like you said it is the rust that kills these trucks around here. I wish the Hilux was available in the US. After 1995, US replaced it with the Tacoma.

@lesklower7281 8 месяцев назад

@@6thGearGarage Fortunately most Hiluxes don't rust in Australia because there is no such thing as the rust belt so the ones with the 22R engine will go for a long time l know my 1997 Hilux will out live me and any 1997 Hilux with the 22R engine manual air-conditioning an aluminium tray and under 500000 kilometres are actually worth aud$5000 to $6000 and l have seen them sell for that