My Salt Boatworks FRS-15 Build Slideshow

Подписаться 1,3 тыс.

Просмотров 114 тыс.

50% 1

I was gonna do voice over to explain everything with photos but I don't have time to with a 1 year old. It would also be a long split series of videos. I may do it later but I wanted to show you guys who are watching my channel on what the deal is with the skiff that I have been fishing on, on the last few videos. I don't kayak anymore so this is my main watercraft. I built this specifically to replace my kayaks to get to further distance areas that I never was able to get to. This has made my fishing days a lot more enjoyable.
The slide show will show almost 95% of the build from start to finish. I lost some photos through switching phones. If you like to see written detail of the build, it is on my instagram @Hoang.Nguyen82
Enjoy the slideshow video!

Развлечения

Опубликовано:

28 июл 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 140

@rockyrf3 2 года назад

Have been on the water all my life, build and rigged more boats than I can count, must say you did an exceptional, first class job !!!! Wish I could tell you it is time for a larger one so I could buy this one HaHa, but couldn't afford it. Nice nice job. Enjoy it. and Tight Lines to ya.

@FishingWithHoang 2 года назад

Thank You! I have thoughts of a larger boat. I've been looking into building a 17 - 18 footer next to take more passengers on the boat. I just don't have the space to build another or I would take on another project already. One of these days though!

@MTHPowerWash Месяц назад

From scratch in the garage Awesome bro 👍🍺

@Baluran_Fishing 2 года назад

very useful for those who watch it, greetings healthy and successful always.

@philrocket7951 Год назад

Just…absolutely stunning my dude!! Such a great job, and insanely fun Timelapse to watch!

@FishingWithHoang Год назад

Thank You Phil! It was one heck of a project!

@dominicnovotny1933 Год назад

A lot of work and a lot of satisfaction!

@giorgiodeconto2752 Год назад

Great job, very good handwork!!

@ralphgrima2515 Год назад

Watching this video made my day. I’m on my fourth boat, and unfortunately I’m not satisfied with the service and product. Companies seams to don’t give a “f” for costumers. I’ve been thinking about doing something (not close at yours) as soon as possible. Thanks for sharing your experience!

@FishingWithHoang Год назад

Thanks for watching!! Lots of companies are money grabbers with poor customer service nowadays. There are only a few Custom builders who have that type of service but them again, boat prices are outrageous! Building one takes time and effort, but you save so much money and you can build it the way you want it and in the end, you can say you built a boat out of the garage.

@oxyfee6486 11 месяцев назад

Beautiful!👍

@stevequate1797 Год назад

I’m 61, but full of energy look 45 I’ve been told. I wished I wasn’t a computer dink. I am building a little 10’ long catamaran pontoon type little boat just so I can get to a few of my fishing spots down on the Texas coast, hv to cross several ship channels and deeper water and the Bull sharks and hammerheads I don’t feel like messing with. So I designed a cool looking Sponson/pontoon, one on each side with a 3/4” marine plywood flat deck w/a chair on it basically a floating deck with a 74lb riptide trolling motor 24vl. My 21’ center console was stolen along with my 2,500 dollar rear bumper and led lighting abs just about all of my fishing gear electronics was locked up inside boat compartments. Insurance labeled as suspicious because of the cost they don’t realize how much fishing gear costs, especially when it’s top of the line Avet, Shimano, ABU, rids custom ordered hand tied, even with receipts so boat insurance people be aware they will screw ya. Anyway I know how to record on my iphone, I also hv a go pro, but damn if I know how to edit any of the vids I could make, or how to get a u tube channel and post or upload videos. I researched from ground up on building kayaks skiffs etc along with watching vids. Talking with fiberglass companies had to learn from bottom up, my right side pontoon what I’m calling them I made a lot of mistakes and wasted a lot of glass. My second one won’t take me half tge time along with not taking 4-5 showers daily from fiberglass dust, I beat that like a step child, there is a secret I learned from a Insulation fiberglass man msn so cool. No itch, thanks to total Boat and us composites taught me alot. After this one is done gonna look really cool with the side consoles I hv designed and made outta HD cardboard just needs to glass them and get some floatation foam in them to hold the 2”x 4” I’m mounting inside them for support. Your boat is super cool great work, I’m going to build a scooter boat with a 69 Hp on it next getting brave. But going to hv to find a heated abs Air Conditioned place I can rent or use for 1/2-1 year while building it. People out there hv some super cool ideas, I used every one I could, including designing and building my own shallow water anchors going to hv one on each pontoon 8’ fiberglass poles that will fold down o to desk of boat whine traveling. msnwished I could hv posted that video

@FishingWithHoang Год назад

Crazy story. Insurance is only good for small claims as we all know now right? Good luck on your builds. Sounds almost like a Craig Cat style build. Perfect for the saltwater flats. Do you not have space in the back yard for a covered awning? Ah you need A/C! I built mine over the winter so I didn't have to deal with the heat. But the cold temp made the epoxy less runny so it was difficult at times to wet out epoxy. The plus side was it allowed me a lot of working time. You ever need help with video editing, I could try and help somehow. It's not that difficult. It's really just cutting and pasting.

@redamor9182 2 года назад

OUTSTANDING EFFORT TO A METICULOUS BUILT GOOD O TO YOU

@FishingWithHoang 2 года назад

Thank You!!!

@andreb.7445 Год назад

Fantastic job!!

@FishingWithHoang Год назад

Thank You!

@andylimb 2 года назад

That cover thumbnail is great with the transition of pain and wood!

@FishingWithHoang 2 года назад

Thankyou!!!!!

@andylimb 2 года назад

Should have been paint. Not pain

@FishingWithHoang 2 года назад

@@andylimb blood sweat tears and Pain to build.. lol

@NewZealandAnglers Год назад

This is a Awesome build bro, well done.

@FishingWithHoang Год назад

Thank You!!!

@tbreaux_5736 3 года назад

I've been waiting for this! Hoping to get started on mine this winter.

@FishingWithHoang 3 года назад

Good luck on your build this winter! It's a very easy and fun build. Join us on Facebook @saltboatworks builders group. We got a bunch of guys sharing their builds with lots of questions being answered.

@tbreaux_5736 3 года назад

@@FishingWithHoang thanks for the heads up! I joined! Can't wait to get started. I'm thinking about building the frs 12 first for the local rivers and electric lakes

@FishingWithHoang 3 года назад

@@tbreaux_5736 12 or 14 will be a great build. All three sized skiffs build the same way. The 12 is on my list too. I want to see if I can replicate what I did with the 15 but with a shorter build time.

@racrx7 2 года назад

Amazing build! Truly inspiring and something to be proud of!!💪🏻🤙🏻

@FishingWithHoang 2 года назад

Thanky You! It sure is/was a proud project...

@samjoplin2069 Год назад

Wow, incredible work man. Looks like it came out of a high-end boat mfr.

@FishingWithHoang Год назад

Thank You!

@andrelupus4859 2 года назад

Nice video.. Thanks to sharing for your knowledge, and greetings from indonesia

@FishingWithHoang 2 года назад

Thankyou! Hey I was born in Galang Indonesia!

@inifilmbagus 2 года назад

nice work..! i like micro skiff

@imbranjamil4994 Год назад

Amazing plywood the best bos👍👍👍👍

@gameiroandre 2 года назад

Muito bom trabalho !! Parabéns 👏👏

@FishingWithHoang 2 года назад

Gracias amigo!

@srfNtoke Год назад

Awesome job

@FishingWithHoang Год назад

Thanks!

@mikerobo5940 3 года назад

Awesome video! Your videos inspired me and my boys to build the same boat. We are over halfway through and can't wait to put it in the water! Thanks again for the great videos :)

@FishingWithHoang 3 года назад

Mike, Thankyou! You guys will surely enjoy it. Good luck with completing it. Very easy to build! It's a very well design and rides really smooth!! I'll be posting a new video real soon. This time full walk around since I believe I have completed the boat to my liking.

@LanceCustomWoodcraft Год назад

Looks fantastic! Great attention to detail. Hope you narrate in the future as able, what you would have done differently, etc. Looking to build this winter myself! :) Nicely done.

@FishingWithHoang Год назад

Thank You! I briefly explain the modifications done on the video I did 7 months ago. It's the 5th video on my list. Check it out. I wish I could do a narrated version but my 2 year old daughter is a handful! Good luck on building yours. It's a fairly easy hull to build.

@LanceCustomWoodcraft Год назад

@@FishingWithHoang I'll be certain to check it out tonight!

@pakde8002 Год назад

It's fun to build your own boat. I probably would have beefed up the tow point on the bow and the bow stem in general for that size boat (well actually I did on my boat). But then I've seen a skiff with a sturdy bow stem get the entire bow section jerked off before so actually a break away point might not be the worst idea 😅

@FishingWithHoang Год назад

They're are as beef as I could get them. The bow eye has quite a few layers of glass on the inside of the hull. The outside has 2 layers of 1208 glass along the keel. The stern eyes have backing plates on the inside of the hull. I think the area that takes the most beating is the Power Pole mount which has backing plate inside of the hull too. Everything is glassed. Going on 3+ years and I sure hope nothing gets ripped apart!

@floydpros 2 года назад

Amazing. Good ideas on a few modifications to the design

@floydpros 2 года назад

Still trying to decide on kit or plans. Marine plywood hard to find in ft worth area

@FishingWithHoang 2 года назад

@@floydpros Thankyou! If you can make the drive, there is a lumber yard here north Austin that sells Meranti plywood. Same place I bought my plywood. It'll save you way much more if you buy the plans and cut the plywood yourself.

@billwallenstein3387 2 года назад

Nice work

@FishingWithHoang 2 года назад

Thank You!

@hardiansyahputra4549 5 месяцев назад

Hello sir, i am from indonesia. It is a good job.

@wertwyn 4 месяца назад

WOWZA!

@worldboatskiff8709 2 года назад

Boat looks great, I have a good idea how much sanding and mixing epoxy goes into that build , I’m trying to convince myself it’s worth it.

@FishingWithHoang 2 года назад

Thankyou... Sanding wasn't that bad actually. All the prep work done during glassing helps lessen fairing. I didn't spend that much time fairing and sanding the hull and it still came out great. Especially for a home built boat. Majority of the sanding was done with a orbital sander. Hard to reach or small radius areas were blocked. It was worth the time and effort spending less than $2k on the hull from plywood to paint. But that was before the pandemic. Good luck on your decision!

@ningken.barau30 10 месяцев назад

Nice boat i like you boat

@enzolopez6162 Год назад

Hi friend. Amazing work. Do you have plans to build this boat? Regards

@FishingWithHoang Год назад

Thank You! I bought the plans at Saltboatworks.com

@enzolopez6162 Год назад

@@FishingWithHoang Tank you. I subscribed to your channel. Regards of Argentina.

@gater308 6 месяцев назад

Hello from Mansfield just south of you. How hard was the process of getting your HID on this to get it titled? Did you have to show all these pictures to the game warden or how does that work? looking to start my 20' LYS this summer. excellent video looks great.

@FishingWithHoang 6 месяцев назад

After the game warden had already passed my inspection and stuck the HIN sticker onto my boat, they ask for reciepts of everything I purchased to build the boat. I also submitted copies of the plans. The guy didnt ask me for my build photos. I was in and out of there pretty quick. I would call them and ask them to be sure though. I doubt anything has changed but you never know!

@joshmaitie5954 4 месяца назад

Absolutely love the build.. where can I get the plan and measurements

@FishingWithHoang 4 месяца назад

Thank you! The plans were bought from Saltboatworks

@Kevinw4040 2 года назад

Great job sir, this build looks awesome.. Does it come with instructions I've never glassed before whatsoever how do you know what kind of glass to use and how to lay it, what direction, how much do you overlap the layers? I'd hate to build it and sink on the maiden voyage lol...

@FishingWithHoang 2 года назад

Thankyou! The plans only come with full sized templates for all parts of the hull. Transfer those to plywood and cut them out. After stitching and epoxying the joints, you glass all joints with either glass you cut out or you can use glass tape. The plans also comes with all building materials listed. Some can be modified. As you glass the joints, you'll learn how to work with the glass. Majority of the glass joints are inside and under the floor so you'll never see them when the boat is completed. Glassing the outside of the hull is fairly simple. I had zero experience when I built the boat. Overlap can be as much as you want but also limited to the width of the glass fabric. Join Saltboatworks Builders Group on facebook. All questions are answered by current builders. The group is pretty active daily. Saltboatworks youtube channel shows basic glassing too so you might wanna check that out also..

@josephryan1576 2 года назад

Beautiful rig. Awesome workmanship. How much water does the completed boat draft? How heavy is the hull after being glassed?

@FishingWithHoang 2 года назад

Thank You! The boat drafts around 6.5" inches fully loaded with 2 people. A little less with one person and light load. I built mine a bit on the heavier side. The estimated hull weight from the plans is 450# pounds. I never weighed my boat but I'm suspecting it's somewhat around 490-ish pounds with all the modifications I did to the hull.

@GoodJumpTitan Год назад

👍👍👍👏👏👏👏👏

@MrNickbode 2 года назад

Amazing! Congratulations 🎉 If I may ask how “wobbly” is it?

@FishingWithHoang 2 года назад

Thank you! It's pretty stable for one person. Having 2 people on board will need a bit of communication when walking around the deck. But everyone has their own sea legs so as stable as it is for me, it may or may not be for others. Out of the other few FRS15 skiffs built, no one has complained about stability.

@frankbalcer9022 Год назад

Starting on this build now. im still in the air weather to use a jack plate or just go with conventional transom well. Any thoughts from you on this option? TIA.... frank

@FishingWithHoang Год назад

Have a great time building! Every single build is different. I guess it depends on how you will be using the boat. A few weeks ago, I tested out lowering the outboard at the very bottom of the jackplate, then gradually raised it while running. The more I raised it up, the more performance I gained. We're not talking huge numbers, but if I can remember, the prop loosened up around 22-23mph and jumped up to 25-26mph instantly. Any higher, the prop blows out. You can hear air mixing into the prop. It also loosened up the sensitivity of the steering so it took less effort to steer the tiller. I use the jackplate a lot when I get into the shallow flats. We're talking a foot or so of water or less. Had a kid who built his and said his felt a bit sluggish with a Yamaha 25. We talked about jackplates. He added a non adjustable jackplate. He was getting 23mph. After the jackplate install he got up to 27mph. I'd say, go for it! If I had to do it all over again, I should have gone with a Bob's Machineshop jackplate. It was around $1100 at the time which steered me away. The Atlas micro jacker was around $700. I keep hearing bad things about the Atlas jackplate, but knock on wood, mine has been running flawlessly. One last thing to thing about which is not on this video is Trim Tabs. (There's a walkthrough video of my boat updated currently. Check out that video for more details on my build if you'd like to.) If you had to choose either trim tabs or jackplate, I would go with Trim Tabs. Since these boats are weight sensitive, the trim tabs help tremendously to keep the bow down depending on load and keeps the nose up in choppy water without porpoising. My boat porpoises like crazy if I don't use the trim tabs half down at 18mph+. But of course, having boat is a great luxury to have. You can really trim out the boat depending on weather, current, load, etc on the fly. Let me know if you have any other questions!

@stevequate1797 Год назад

At 3:04 what’s that aluminum block with a what looks to be a shaft with a block machined on it? Never seen that thing before, it’s not a shaft I don’t think I saw outboard on it

@jeff50901 2 года назад

Looks great! Any idea how many beers this ended up taking?

@FishingWithHoang 2 года назад

Thank you! Atleast a couple of 12 packs!!!

@forestjump3r516 2 года назад

Man this is such a nice boat how's it holding up? Love the channel to keep the content coming

@FishingWithHoang 2 года назад

Thankyou! And thankyou again!! I took the boat out for a run yesterday. My wife and my baby daughter tagged along. With the new 30HP Suzuki that we are breaking in still, got us up to 27mph into the wind. Used to be around 18-20mph with the 20HP suzuki. The boat road really smooth as always. I made some changes recently. Once I get everything all buttoned up, I am going to do another walk through video..

@stevequate1797 Год назад

I researched Kurt tools and it’s a vise but what’s the part in it? Used for what in boat building process

@FishingWithHoang Год назад

I copied and pasted all of my photos in the video editing software. Some of my actual everyday job photos snuck into the slideshow. There's one you see with grab bar in the vises where I was cutting a hole for running wires under the floor. The other was for a outboard motor strap. I need to go in and edit the video on youtube.

@soulcapitalist6204 2 года назад

Is that engineered floor underlayment?

@blakemorales3794 2 года назад

What did you use for the top flooring? The white grip Padding

@FishingWithHoang 2 года назад

It's seadek. I bought two rolls during black friday sale. Its actually Caribean Blue. It matched the color of the hull.

@rpb1961 2 года назад

Nice! 8k + 600 hrs at 50.00 an hour is 38k dollar boat. Now I see why boats cost so much.

@FishingWithHoang 2 года назад

Most of the hours was brain storming. Trying to put A and B together. Other times was waiting on epoxy to cure and paint to dry.

@frankbalcer9022 6 месяцев назад

Thinking about adding the Keel Guard strip. How many feet did you use on your build?

@FishingWithHoang 6 месяцев назад

Hey Frank! I think I used 4 feet of it.

@user-hr6qt1we6t 3 месяца назад

ฉันอยากใด้ความรู้ในการสร้าง มันสวยงามมาก

@user-dy3nl9pl1r 2 года назад

Great job~~~!!! How was weight of boat?

@FishingWithHoang 2 года назад

Thank You! Its around 227kg or 500 pounds.. I built it a bit heavier than the plans.

@texashillcountryadv9197 7 месяцев назад

Beautiful rig! But I gotta ask was the 600+ hours worth it over buying one ?

@FishingWithHoang 7 месяцев назад

Thank You! 600+ hours was hours of building a boat for the first time. I bet 2nd time around I could cut that in half. I spent around $10k on the whole rig. Trailer and everything. Minus the electronics. That was 2019 prices though. A commercial built 15 foot skiff is around $28k. Yes it was worth all the hours spent on building one and also its a perk of having a home built boat built to your own specs.

@sharonbraselton3135 7 месяцев назад

Wrong. Buy easy disevit

@FishingWithHoang 7 месяцев назад

@@sharonbraselton3135 You're right... Disevit is everywhere

@freshrain777 Год назад

Where did you get the plans? Great job

@FishingWithHoang Год назад

Thanks! Saltboatworks website is where I got it from.

@henryclark5486 Год назад

Very nice 👌 👍

@FishingWithHoang Год назад

Thank You!

@kayakfisherman100 2 года назад

Where did you get the wood for the sheer bumpers and the deck supports?

@FishingWithHoang 2 года назад

I bought 1 " x 2" Cedar strips from Homedepot.

@robaalvarez 2 года назад

Nice build. How tall is the grab bar?

@FishingWithHoang 2 года назад

Thankyou... It's 36" tall.

@LTZ_Z71 Год назад

Do you think building this boat with a small center console would be possible?

@FishingWithHoang Год назад

There is a few that exists and are being built as center console. There is also one with side console. You can build it however you like

@cartmanrlsusall 9 месяцев назад

Scarf joints and a splice?

@danisback2505 Год назад

Where did you buy your plywood at? And did you go with what they recommended? iE Meranti/okoume?

@FishingWithHoang Год назад

I bought my Meranti plywood at a lumbar yard in Austin TX. I called around all of the lumbar yards in the Texas hill country area and was willing to drive rather than paying for plywood to be shipped. You can use either type plywood you want. Meranti is heavier but stiffer and stronger. Okume is lighter, cost a whole lot more and i easier to bend. I think the weight difference was around 30%.

@danisback2505 Год назад

@@FishingWithHoang thanks man I really appreciate it!

@bennettbrazell5493 Год назад

does the build come with a motor?

@Max-Tv34 Год назад

İ want doing this

@quarrymaka8919 2 года назад

Can I get the boat plan and measurement please

@FishingWithHoang 2 года назад

Yeah.. go to saltboatworks.com

@Nated1900 2 года назад

How much did it cost you from start to finish?

@FishingWithHoang 2 года назад

Under $2k for the hull. This was 2019 prices.

@miftachulichwan 2 года назад

Amazing skift, can you share this skift design for me..

@FishingWithHoang 2 года назад

Thanks... I bought the design from www.saltboatworks.com

@billwallenstein3387 2 года назад

What was your total costs after everything?

@FishingWithHoang 2 года назад

All builds are different. Could be a range of around $5k to $10k or more. I don't know what my total build cost was but guessing around $8k

@danisback2505 Год назад

What did you do for a fuel tank?

@FishingWithHoang Год назад

6 gallon under the bow hatch. Watch my walkthrough video whdre I explain a bit of the setup.

@ramlandilan784 2 года назад

Boat size

@liemvotan3031 9 месяцев назад

Có thể xin bảng thiết kế được không? Cảm ơn

@robertpascua5432 2 года назад

Sir where i can get the copy of the template

@FishingWithHoang 2 года назад

Go to SaltBoatWorks website...

@JuniorSilva-kw1nd Год назад

Hello friend Congratulations for the video I'm Brazilian and subscribed to your channel would you have the mold of these plants for me

@FishingWithHoang Год назад

Hi! Thanks for watching! Plans are at www.Saltboatworks.com

@richardmauch1042 Год назад

Hey how long did it take to get your plans in the mail? I’m having issues getting ahold of anyone.

@FishingWithHoang 11 месяцев назад

I thought I had replied to you! I got mine within a few days. That was before Saltboatworks was popular. The only way anyone is able to get a hold of him is by email. You could also try messaging him on instagram or facebook. You aren't the only person with a bit of delay. Let me know if you have not gotten in contact with him. I will try and help out.

@richardmauch1042 11 месяцев назад

@@FishingWithHoang thanks and I did end up getting it today. And they where awesome. How did you go about getting the boat registered?

@FishingWithHoang 11 месяцев назад

@@richardmauch1042 Check with your local game warden office or boating registration office. They have all the info. The only thing I did on my part was to save all of the receipts that I got from making every single purchase for the build. I had a good turn out during inspection because they didn't even inspect my boat. The Game Warden was really cool. He slapped on 2 HIN stickers, I paid and gave them all of the receipts that they requested.

@user-dp1od9ih2p 7 месяцев назад

Какая килеватость на миделе и на транце?

@FishingWithHoang 7 месяцев назад

Sorry I do not know the deadrise angle. I am " guessing " it is around 7° degrees.

@ariszitter8933 2 года назад

Bisakah memberikan ukuran yg tepat semuanya pak?👍👍

@terryogletree2128 2 года назад

This is one of those " don't try this at home " moments

@FishingWithHoang 2 года назад

Tried and true!!

@bipedalhominid6815 2 года назад

Y not put the pics in order lol

@FishingWithHoang 2 года назад

They are in order by date and time.

@eddyhasbari8752 2 года назад

Apakah aku bisa mendapatkan salinan sketsa desain perahu buatan mu ini saudara ku ?

@FishingWithHoang 2 года назад

Get it here www.saltboatworks.com

@LTZ_Z71 Год назад

Again, great build and awesome video. One other question for you though. I also live in Texas and was wondering what plywood did you use and where did you source it? Thanks!

@FishingWithHoang Год назад

Thank you! I got my Meranti plywood from Fine Lumbar in ATX. Prices are very reasonable!