Wiring mess
The wiring mess is an item which can be found inside the garage at home. It is used to wire up the Satsuma's critical components as well as accessories. Wires can be attached by holding the wiring mess on top of a part/connector, pressing F when the check mark icon Check mark icon appears, then holding it on top of another part/connector and doing the same.
Note: Wires will only appear if the connection is correct, no incorrect connections can be made.
Wiring up Satsuma
There are a total of 26 wires that can be attached. They do not need to be attached in any particular order, and some wires are not required for the car to start.
After all the wires have been attached, bolt in the 8mm positive bolt on the battery (red), then the negative bolt (black). Tightening the negative bolt first causes sparking, and not disconnecting the negative bolt will cause the car to catch fire.
Warning: Make sure to always loosen at least the negative (black) side of the battery when attaching wires, as neglecting to do so may result in shorting the car or death by electrocution.
Connector 1 Connector 2
Rear harness connectorRear harness connector Fuel tank
(Fuel tank)
Rear harness connectorRear harness connector Rearlight left
(Rear light)
Rear harness connectorRear harness connector Rearlight right
(Rear light)
Headlights connectorHeadlights connector Headlight left
(Headlight, must be detached first with 2x7mm)
Headlights connectorHeadlights connector Headlight right
(Headlight, must be detached first with 2x7mm)
Headlights connectorHeadlights connector Marker light left
(Marker light)
Headlights connectorHeadlights connector Marker light right
(Marker light)
Headlights connectorHeadlights connector Main harness connectorMain harness connector
Main harness connectorMain harness connector RegulatorRegulator
Main harness connectorMain harness connector Positive terminal
(Battery)
Main harness connectorMain harness connector Ignition coil
(Electrics)
Main harness connectorMain harness connector Radiator fan connector
(Radiator)
FuseboxFusebox Instrument panel 1
(Dashboard meters, temp/fuel gauge)
FuseboxFusebox Ignition switch
(Steering column)
FuseboxFusebox Instrument panel 2
(Dashboard meters, hazard/cigarette lighter switches)
Radio harnessRadio harness Amplifier power
(Amplifier)
Radio harnessRadio harness Radio
(Radio/CD player)
Dash harness connectorDash harness connector Light switch
(Dashboard meters, wiper/headlight switches)
Dash harness connectorDash harness connector AFR gauge
(Fuel mixture gauge)
Dash harness connectorDash harness connector Extra gauges
(Extra gauges)
Positive terminal
(Battery) Starter
(Starter, bolted in with 1x5mm)
Negative terminal
(Battery) Battery ground connector
(Starter, front bolt must be untightened first with 1x7mm)
RegulatorRegulator Alternator
(Alternator)
Amplifier audio
(Amplifier) Radio
(CD player)
Audio out left
(Amplifier) Subwoofer left
(Subwoofer)
Audio out right
(Amplifier) Subwoofer right
(Subwoofer)
******************************************************
THANKS FOR WATCHING
ＬＩＫＥ | ＣＯＭＭＥＮＴ | ＳＨＡＲＥ | ＳＵＢＳＣＲＩＢＥ
#OGYGIA_VLOGS #My#Summer#Car#Wiring#mess#2020
26 авг 2024
