MY TINNY CAMPING SETUP ⛺️ 🎣 All the gear I take on a tinny camping adventure. 

I’d like to see that mate. 🍻

👍

Nice one steve I hope you have some mad adventures in the new tinny.

I’ll check the Silky out mate. Cheers

Thanks Jack. I was thinking of getting a new sounder so if that happens you will see a lot of the wiring. Other wise I have a USB install video which shows a bit of the wiring.

Thanks mate. Have you been getting out in your tinny much?

@@AusAdventure Unfortunately not. I’ve been doing a big reno job at home putting a new timber floor down. Almost finished so should be out in the tinnie in another week or so. Can’t wait. Your vids make me keen. 😃🐟🐟👍

Thanks.

Yeah your pretty much right on that one. It’s generally just the amount of fuel that changes. 🍻

Cheers Paul. There were a few people that were asking for this type of info so glad it was helpful. 🍻

No problem 👍

No worries mate.

Thanks for watching them mate. Cheers🍻

Hi Rob thanks for the sub. I definitely enjoy getting out in the bay. I was supposed to be on a trip right now but cyclone Seth put an end to that unfortunately. Hopefully it won't be too long before I'm out again. Cheers Shannon

Cheers steve. Only ended up getting a couple of small flathead unfortunately but the main thing I go out for is to relax so in that case it was a success.

Cheers Joel.

Sweet mate. Hope you have some mad adventures when you do.

Thanks Matt

Cheers Marty. Pretty sure this vid was your idea.

@@AusAdventure yeah I did suggest this kinda vid 👍. Sounds a few people have asked similar. Good to see other’s set ups & going by the comments, the video is well received 🤙 Cheers legend 🍻🎣

That sucks about the wrist mate. Hopefully you won’t be out of action for long. 👍

@@AusAdventure Cheers bud

Can’t wait to have a beer with ya Timmy. 🍻

That’s awesome mate. You will be able to have some mad adventures in that. I hope to organise a camping weekend at the Pin at some point for anyone that wants to come so keep an eye out for that. 🍻

Thanks mate. Generally I wear a shimano or Diawa fishing shirt. I do like those Columbia pants that have the zip off legs as they can be shorts or long pants and they have lots of pockets.

Hey mate. There is no law in QLD saying they have to be out of the plastic that I know about.

Thanks mate. I had the casting deck frame and the bow mount plate done by and engineering company in Hervey Bay. Sorry but can’t remember the name of the business.

Cheers mate. My storage box is 460mm high. Brand is pelican case.

Hi mate just found out I need another surgery on my ankle so will be out of action for a little while again which sucks. Glad the vid was helpful. That is the only esky I take even on a longer trip. I store my camera gear in a smaller pelican case. I probably could have shown that but most people wouldn’t carry around the camera gear like I do. 🍻

@@AusAdventure oh that sux re ur ankle👎 I’m writing this sitting in my surgeons waiting room to hopefully get signed off my shoulder reconstruction?? Yeh I’m looking for a good waterproof container for my gopro and gear etc. Just flew back in yesterday from a trip to NZ so took heaps of footage so going to have a vid done soon as we had an epic trip in the Sth island but bloody cold 🥶 Anyway stay safe budd an look forward to ur nxt vid🤙

Hi Travis, I use google earth a lot to find camping spots. Otherwise I’m always looking while I’m out in the boat. I also ask other boat campers what their favourite spots are. Bribie island and pumicestone passage might be a good area for you to go explore. Thanks for watching my vids. 👍

I do take a small shovel but I forgot to show it. If you check out the video where I go tinny camping in the Tweed River you will see it.

4.2m. Thanks for watching Debbie.

Hi Oliver. At some point I want to upgrade the sounder in the boat so I might do some stuff on wiring then. Probably not till next year though.

Hi Jason, Its just a spare jacket mate so all is good. Thanks for watching mate.

I had the casting deck made as the boat didn’t originally come with one.

Thanks mate. Well that depends on a lot of things like wind and sea conditions, how much weight is in the boat etc. On average it lasts a couple of days but if I use it all day it more like one day. I recently upgraded the battery to lithium and that doubled the run time and halved its weight so I would definitely recommend a lithium battery.

🍻

Hay Dan. External dimensions are 54cm x109cm. 👍

No worries Bee. The brand of mine is a Quintrex Topender but it’s name is Fish Fingers. 🍻

Hi Ian not a bad idea mate. I’m super busy with kids and building a house that it probably won’t happen so you might have to keep doing the stop start. Sorry mate. Thanks for watching though.

Nice work on getting your licence mate. Just get fresh bait and anywhere can be a good fishing spot.

Hey James I’m sure I saw alloy boats in Bass Pro shops when I was last there but not sure where you would get one similar to mine.

Mate in certain situations like crossing some coastal bars or in rough weather I have the bag out right next to me so it’s easy to access. But otherwise I want all my safety equipment in the one place and I am comfortable with it all under the casting deck. From my experience in a lot of emergencies like a capsize or collision there is not enough time to grab anything so people usually have to swim under the capsized vessel to retrieve the Epirb and safety gear. In a perfect world I would like it all stored in a Lifecell on a float free cradle but they take up a lot of room. Hope that explains why I do it that way. Thanks for watching.

No worries mate. My wife complains about the ride of it when there is chop so it’s not a good size if it’s rough. So my advice would be to stick to good days or buy a bigger boat.

Most of the time no it isn’t. Only when I go more than 2nm offshore is the Epirb required. It is a good idea to have both though.

Quintrex 4.2m topender. 🍻 cheers mate.

Hi chris I got the esky 20 years ago so can’t remember the brand. You might have to measure the area you have then do some shopping around.

@@AusAdventure Had another watch and actually it was the "pelican case"' I'm interested in, not the esky. Cheers.

Hay Peter I was actually thinking about organising a tinny camping weekend at the Pin for anyone that wanted to come at some point. So I’ll keep you posted. 🍻

@@AusAdventure I’ll be the first one there 😀😀😀

@@AusAdventure if you don’t have anything on weekend of 11 June we’ve organised a camping fishing trip at south straddie (the bedrooms ) so if family and life allows come join us !!

Hi mate thanks for watching the vids. I do still like the position of my rod holders however since installing the bimini it has made it a little more difficult to get them in and out. But I can’t think of a better spot to put them. Hope that helps. 🍻

​@@AusAdventure hey mate, great vid. What brand are your rod holders? Are they slip on or welded on? Looking for a way to store my 4 rods vertically on my tinny. Cheers

@@tomnz3620 sorry mate but not sure what brand they are. Got them 10 years ago. I just looked for ones that have rubber on them to protect the rods. I have riveted it to the side pocket.

Not sure if you mean about the video or my boat set up so I’ll answer both. I did forget to talk about a couple of things that I take every time which is a folding shovel, a head torch and a Leatherman multi tool. In relation to the boat I wish I had a small console in which I had a place out of the weather where I could charge things like my phone and go pros. Also I wished it had a plumbed live bait tank. I’m pretty happy with the camping gear though. Thanks for watching and the question.

@@AusAdventure I meant the boat sorry for not being clear

thankyou

30hp. 👍

It’s a Holden and I’m sure you can guess the model by some of the stuff hanging on the walls. My Minn Kota install video will give it away I think if your interested.

Hr? Have to do a video on that surly

@@coreyhaskard6222 I might get it out one of these days.

Mate I actually have no idea.

Hey Rex, I take a couple of screw drivers, spanner’s and a spark plug socket. Also a pair of pliers. Pretty basic. Depends on the engine you have and how complex your electrical system is.

30 mate. Wish it was a 40 though.

4.2m mate. Cheers for watching.

Since 2018 mate. I just make one whenever I have an opportunity. No regular schedule or anything.

I just bought myself a Lithium battery for my electric motor so Im pretty pumped about that. My start battery I have an external USB on the battery box.