Step 1 - deflate the tyre by removing the valve core
Step 2 - Remove the motor cable clips
Step 3 - Remove the calliper
Step 4 - Remove the wheel nuts and washer being careful to support the wheel
Step 5 - Heat the disc screws and then remove them as well as the disc
Step 6 - Break the tyre bead
Step 7 - Insert the tyre levers and use the scissor technique to remove the tyre
Step 8 - Make sure the new tyre is the right way round before fitting
Step 9 - Use tyre paste to lubricate the bead
Step 10 - Press the tyre down over the rim
Step 11 - Use the tyre leavers to ease the tyre onto the rim at one end
Step 12 - Repeat the process until the tyre is seated
Step 13 - Now replace the valve core
Step 14 - Inflate the tyre to near maximum PSI to seat the bead
Step 15 - Reduce PSI for personal preference
Step 16 - Clean up the wheel before refitting
Step 17 - Replace the disc making sure it is facing the right way
Step 18 - loctite disc screws before fixing
Step 19 - Replace the washers and slide the wheel onto the swingarms make sure it is the right way round
Step 20 - Add Loctite to both sides of the axel and torque axle bolts to manufacturers guidelines
Step 21 - Replace motor cable clips and use Loctite on the screws
Step 22 - Replace the calliper and use Loctite on the screws
Step 23 - Replace the dust cover on the valve and you are finished.
13 дек 2022
