I like screw post when mounting switches. I buy cheap plastic toys or keep nerf shells so I can steal their screw posts and I use acetone mixed with some of the nerf shell to get a plastic putty or glue and glue a post wherever I want a post. The acetone and nerf shell acts like welding so the added post is nice and strong and will work.
While I applaud that you made this great to follow mod guide - seriously: only 99fps on 3s lipo is not worth it. The stock motors must be wound like the mk3 DZ ones for high voltage and low amp draw. I think it would be worth experimenting to run this on a 4s lipo instead. If I went from 9v on a Nemesis at 95fps up to a 3s lipo (12v give or take) with about 125-130fps thats a 33% increase in voltage and roughly in fps. If we have stock 12v here thanks to eight alkalines used (yes, voltage drop under load) - going to 16v on a 4s lipo is again a 33% increase in voltage - and would likely result in according fps. That is so spot on to what I predicted on Facebook when you first posted about this. Or actually even worse. :/ Considering you have now decent new flywheels for Rival in store and hopefully someone creates a 130 motor cage for this - as soon as I get one or two imported to Germany (which will as always be a pain) , THAT is what I will test out.
@@SolaR_FlarE910 still have not managed to get it to Germany. Mirage yes, challenger still elusive over here. But once done, it will be on the owlnerfcommunity RU-vid channel for sure.
I take a drill bit one size larger then the wire size and slowly drill out the holes on the switch terminals. It makes putting the wire ends through much easier before soldering.
Other Batteries? was hoping you'd show some test numbers for different batteries. like how's it do on 2s Lipo? or a Nimh 9.6 Pack? or the Stryfe X Pack?
Hello I am in need of assistance. I bought your guises nemesis mod kit and watched the video and connected everything correctly. The fly wheels do not spin but the gears and the track do run. I don’t understand what I did wrong please help.
Have you seen the mirage? I haven’t heard or seen anything about it. Saw one at store the other night. Looks like a nice blaster. Like a really refined version of the Apollo.
Does this thing handle 3rd party magazines at all? Pathfinder jammed on every one i used after the first shot and i never bothered with any of the accurival weapons after that.
Well the blaster is not near optimized yet. He just upgraded the wirings and the power. That was a lot of work. But necessary if you plan on running more powerful motors and higher crush cage. Which should put you around 120fps. Plus these balls don't fly as straight when being launched at high velocity.
