Hi Darac, i used this one: amzn.to/3KwOfOw i don't know exactly, what kind. But it work's good! ✔ In this set, there are also the "membran".. If you doesn't have the the Video with the simple trick, to get a better accelaration, maybe this could be interessting for you! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-vuWdonY33rc.html regards Volker!
@@daracroky8457 Sorry no.. The Kedo set use some people in Germany. Also look for the keyword (tag) "Swiss - Schweizer Bedüsung" - they used smaller main nozzles. I, however, have done that with the jet needles, these hung lower. Important to know: Nozzle needles wear out when they oscillate in the airflow in the nozzles. Since the thinner over the years, thus the mixture in the load range richer. - But I'm not a car mechanic. All only "half-knowledge". And I always checked the manifold temperature as well. If the mixture is too lean, the manifolds get hot. I even believe that you can use it to approximately synchronize the carburetors if you work accurately, and compare left and right.... If you don't have gauges. Laser temperature gauge