Never Imagined It Would End Like This 72ft Yacht

Подписаться 12 тыс.

Просмотров 48 тыс.

50% 1

Never imagined it would end this way for our clients beautiful 72ft Luxury Yacht that sank a few months ago. We tried to get estimates for the systems that needed to be replaced but it was difficult to get people to come here to take a look at the yacht. So it was in our clients best interest to get it towed up North.
Watch as our team of experts meticulously assess, disassemble and restore the these boat/yacht projects. Join us in our journey to prove that with hard work, dedication and a little bit of magic, anything is possible. Don't forget the best compliment is to leave a comment and subscribe to our channel for more incredible boat projects!
Subscribe - / @willfixthat
72ft Luxury Yacht Never Imagined It Would End This Way • Never Imagined It Woul...
Boat is Sinking ... This Was The Worst ... • Boat Is SINKING ... Th...
Can You Believe E-Bike Burn Luxury Yacht • If They Only Knew ... ...
Sinking Luxury Yacht Repairs Are Worse Then ... • Sinking Luxury Yacht R...
Would Have Been TOTAL LOSS! Temporary Fix • Boat Would Have Been T...
**NEW VIDEOS UPLOADED EVERY SUNDAY!**
Send all inquires to MobileMarineKW@gmail.com
So thru the years many of our clients have asked us how we "manage the chaos" of Our Boat Repair Businesses! Our videos are made up of projects we are currently work on! You may also see food and drinks sprinkled in since we LOVE to eat! 😁
We look forward to hearing from YOU leave us a comment below!
Thanks for watching, share, like and subscribe 😁!
#boatrepair #yachtrepair #undertow

Опубликовано:

30 сен 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 79

@scottmaz4063 9 месяцев назад

Job well done good morning

@WillFixThat 9 месяцев назад

Good Morning Scott .... how's this Florida weather treating you? We were just working outside this morning and it feels like 99' sweating our butts off STILL

@WillFixThat 9 месяцев назад

Have you ever had a dock line snap? We just had one get a bit tight and you can see Matt scrambling to get it loose! Yup our clients beautiful 72ft yacht got towed North for the repairs after it starting sinking a few months back ... if you have questions about it leave them below.

@WillFixThat 9 месяцев назад

@@abcgang8048⁠ugh sorry to hear about your wife’s family. That sucks … yes lines are no joke! You see Matt scrambling to free the line since the head boat didn’t know we had an issue at first!

@themarineking 8 месяцев назад

Nice job getting her back in the water.

@WillFixThat 8 месяцев назад

Thanks back in the to head north for the over haul!

@themarineking 8 месяцев назад

@@WillFixThat Nice

@jimlimberakis8115 2 месяца назад

I learn something with every video.

@WillFixThat 2 месяца назад

Awesome Jim glad to hear it!

@mennoboon8037 9 месяцев назад

Nice job back in the water and good to see it getting worked on again👍

@WillFixThat 9 месяцев назад

Yup unfortunately had to send it away … it’ll be back when it’s complete!

@paulkersey2179 9 месяцев назад

Nice work.

@WillFixThat 9 месяцев назад

Thanks Paul …. Just trying to manage the chaos 😊

@simongreen247 9 месяцев назад

6:25 you can see in his glasses how close his wife was to fall in the drink lol

@WillFixThat 9 месяцев назад

LOL ... Yes almost went for a swim ... I tripped on hose and dock lines cause I was trying not to get the boat in the scene.

@Clint8551 9 месяцев назад

You are awesome!

@WillFixThat 9 месяцев назад

What makes you say that Clint? Do appreciate the feedback. 😊

@RStout59 9 месяцев назад

Awesome and interesting. Seeing these problems makes me consider where i would spend my money regarding yachts. They seem to be an ongoing maintenance problem.

@WillFixThat 9 месяцев назад

You have no idea .... keep watching we can't make this sheet up! All we do is manage other peoples chaos!

@lb7wade518 9 месяцев назад

Nice job!!

@WillFixThat 9 месяцев назад

Thanks Wade.

@SteeledJester 8 месяцев назад

Great video team... perfect length and very informative! 😉

@WillFixThat 8 месяцев назад

Lol perfect length … too long for us 🤣 thanks for sharing!

@ericbarriga39 9 месяцев назад

You do great work. Wish you was in New Jersey.

@WillFixThat 9 месяцев назад

Thanks sooo much but it’s a bit too cold there in the winter!

@user-ji6sd3ou8b 3 месяца назад

Nice work

@WillFixThat 3 месяца назад

Thank you! Cheers!

@Fv-OnCall 3 месяца назад

That tow boat looks a lot like Dave Marcianos old boat the falcon from wicked tuna

@WillFixThat 3 месяца назад

Not sure if its his boat or not.

@johnmurphy6366 9 месяцев назад

Maybe added a valve on the new strainer body,so you don’t have to reach over to old strainer body to service the strainer.2nd,no one uses that blue block without getting it all over whichever hand touches it,kuddos for neatness

@WillFixThat 9 месяцев назад

That’s temporary till we haul the boat and replace it all.

@shawnwood9875 8 месяцев назад

You have a lot of faith in the nut driver. I have a tendency to over tighten those clamps-out of abundance of caution.

@WillFixThat 8 месяцев назад

The driver Matt uses is spring loaded!

@JJP72095 9 месяцев назад

Install an electro sea dismantle the reverse cycle heat sensor on the chiller. Probably bad

@WillFixThat 9 месяцев назад

I like electro sea but part of the problem is mud. The bottom is less then a foot off bottom during low tides. Sucks up mud.

@davidduner9562 9 месяцев назад

Thanks for the videos...did you make up the descaler fitting on the sea strainer,...

@WillFixThat 9 месяцев назад

Yes homemade.

@ValorSailing 9 месяцев назад

Great video, one of the best. We were planning on putting a descaling kit together today in the seemingly more common method of hoses to a bucket with sump or bilge pump moving descaler through the ac for a few hours, but liked your method of using a strainer flush cap so much we used it on both air conditioners and it worked great with better water flow and cooler temperatures at the ac vents as the result. We now have a simple kit on hand for future use that doesn't take up much space, and simpler means we'll probably do it more frequently. Also, we used a $.99 spring clamp from HD to clamp the hose. Thanks again for the great video.

@WillFixThat 9 месяцев назад

Thanks was watching Valor Sailing! Now you can keep your units clean 👍 what made it one of the best videos?

@ValorSailing 9 месяцев назад

@@WillFixThat Perfect timing (for us), and great explanation.

@WillFixThat 9 месяцев назад

@@ValorSailingglad it’s going to help you in your boat maintenance!

@wallacejeffery5786 3 месяца назад

Crazy how small that strainer was and really poor location. On the 72, most people have no idea how small a failure will sink a boat. I am a retired shipbuilder. Amazing how much water can get into a destroyer thru an open valve/sea cock. I appreciate y’all’s patience, professionalism so much!! Bonking your head in a tiny engine room is no fun either

@WillFixThat 3 месяца назад

The guys bang their heads … sometimes pretty hard 🥴 I know Matt has seen stars a few times! People don’t realize that once the water starts it comes in fast! If those bilges can’t keep up you’ve got a real problem.

@conradlogan5201 9 месяцев назад

I’d be a bit surprised if the coast guard doesn’t raise eyebrows with the strainer placement on top of the hull ID numbers. (Hopefully I’m wrong)

@WillFixThat 9 месяцев назад

I made sure there is another one. The builder rounded out the screws so you would have to drill them out to get it off.

@leonphelps123 2 месяца назад

Funny stuff. Been boating my whole life, never had hull id numbers checked.

@Jerrynov13 2 дня назад

About. 21:33

@jakejacobson2999 9 месяцев назад

It’s crazy to think that people can afford a yacht like that AND a house 😂 man I’d just live in that

@WillFixThat 9 месяцев назад

People do live in their boats when they are away from home.

@salneri9034 8 месяцев назад

Great work and nice video. Is there a previous video showing what you work you did on that 72' Marquis ? I'm looking at buying a 65' Marquis. What are your thoughts on that boat? Did builder do a good job with all the systems? Any negative comments/concerns? Thanks!

@WillFixThat 8 месяцев назад

Buy from a boat company that is in business! There is no customer/technical support for this boat! Yes we have a few videos! Did you see the sinking one?

@lawnmowerman25 9 месяцев назад

The Thermocouple on the AC is likely bad and giving the incorrect temperature.

@WillFixThat 9 месяцев назад

It’s the water temp sensors and they got a bad batch of sensors.

@kenwest2699 8 месяцев назад

If you bring the spinnaker in behind the mainsail it is so easy to handle can't believe you don't do this.

@WillFixThat 8 месяцев назад

Hey Ken … what part of the video are you referring too so I can share it with Matt?

@Harrybollox 9 месяцев назад

Those strainers with just two screws at the top are tricky when you have to undo a stiff cap , as the turning force on the cap tries to pull one of the screws out. Either remove very regularly so as not to get stiff or maybe brace it with a strap

@WillFixThat 9 месяцев назад

Ya those old Perko strainers are not the greatest.

@r7boatguy 9 месяцев назад

What was wrong with the AC? Just the undersized strainer?

@WillFixThat 9 месяцев назад

Main problem is the builder put both chillers, 9 air handlers and main battery charger on 1 shore power leg. Draws to many amps and trips breakers. Need to spread out the load.

@jeffconley819 8 месяцев назад

@@WillFixThatomg that’s a huge load for one circuit . What were they thinking .

@doug2202 9 месяцев назад

What descaled do you recommend for outboards and what is the best procedure to do it

@WillFixThat 9 месяцев назад

We use barnacle buster and we pump it thru!

@doug2202 9 месяцев назад

@@WillFixThat So you pull the lower unit and just pump it up through the motor

@doug2202 9 месяцев назад

Got ya. Would you recommend pulling the thermostats and just keep circulating the descaler for some time and then replace with new thermostats

@Jerrynov13 2 дня назад

What was the liquid from the gallon that you put in the system? I know it was quite a while ago but I just found this video. Thanks

@WillFixThat 2 дня назад

What minute are you referring to in the video?

@Jerrynov13 2 дня назад

About21:33

@lindagray1488 8 месяцев назад

Where can I purchase those hose clamps ? Great channel !

@WillFixThat 8 месяцев назад

We get ours from West Marine.

@stephenscott963 9 месяцев назад

Great video, do you do the same thing basically for the mains, gens etc, and how often? At one point when you started pumping in descaler, u said you were opening up some valve “ a little”? Just curious if you didn’t open up all the way when putting in descaler? Great stuff as always!

@WillFixThat 9 месяцев назад

The way I descale I use the thru hull shut off pump to throttle the pump and create a suction to draw in the descale fluid.

@stephenscott963 8 месяцев назад

Don’t mean to be nutty, but do you de-scale mains, gens any other items? If so approximately how often, and I would guess it depends on where u are located, and how often used? Thanks again and any chance of doing a descale from top to bottom with every single thing involved for us beginners?

@WillFixThat 8 месяцев назад

@@stephenscott963email us we are traveling the next few days!

@ericgregory3005 9 месяцев назад

These marine airs really remove heat more than cool. I guess it's a space constraint to not have normal home a/c. Seems these marine a/c's are maintenance hogs.

@WillFixThat 9 месяцев назад

You're right they absorb heat ... salt water is tough on a/c units and everything else.

@Velislide 9 месяцев назад

I'll never understand why anyone trusts any type of hose clamp over a T-Clamp, any day. Something you're almost never changing, and not installing a million of. Why not spend the extra few dollars and get something that will absolutely never loosen or fail.

@WillFixThat 9 месяцев назад

Things are built cheaper these days so we have to buy more and more.

@Velislide 9 месяцев назад

@@WillFixThat the cost of a few extra dollars on any boat, is worth it when the outcome could be it sinking. It’s kind of like the difference of using a plastic thru hull, versus another material.

@WillFixThat 9 месяцев назад

@@Velislide exactly we would never use plastic thru hulls cause your asking for trouble. Agree with you completely spend a little more for a 1 time fix and not have to worry later. Above I was just saying that companies have been taking a cheaper route and it causes us to have to buy more.