New 1/24th RC Drift Car!!! Rhino Racing RTS Unboxing and Setup | RTS Part One

Подписаться 5 тыс.

Просмотров 4,9 тыс.

50% 1

Join me as I check out the newest Mini RC Drift chassis to the market! The Rhino Racing RTS 1/24 RC Drift car is a scaled down version of the 1/10th scale Rhino Racing Shark chassis and its bringing some heat!
In this video we unbox and build my new RTS and get it almost ready for the track. Subscribe so you dont miss the next video's on this car, also check my channel to see if Part Two has been uploaded!
I reached out to Rhino Racing to see if I could get my hands on a chassis to test out and put through its paces here on my channel and they agreed to send me one. They did not ask for anything but an honest review and Ill be completely honest in all of my discussions about this new chassis here on my channel! I just wanted to make that clear to all of you who watch and support.
Buy your own RTS from here! or check out some of the other cool stuff Super-G has to offer at supergdrift.co...
If your looking for the best info on RC Drift check out this link!
supergdrift.co...
Mini RC Drift Electronics I Use:
ESC and Motor Combo: www.avantlink....
Servo: amzn.to/3XbQG0o
Gyro: amzn.to/3X7p9Nq
My Favorite Tools:
1.3mm Wrench: amzn.to/3KwDtrs
.9mm Wrench: amzn.to/3Vp2meJ
4.5mm Nut Driver: amzn.to/3X9B8Kp
Wheel Nuts: amzn.to/3RcXln6
*These are Affiliate Links that help support the Channel at no cost to you! Thanks for watching!

Опубликовано:

10 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 65

@Thunder-xo1cx 5 дней назад

That looks like a really nice kit ,I like it a lot

@SeanLewisMedia 4 дня назад

@@Thunder-xo1cx It has been great so far👍🏼

@davidhess3320 3 месяца назад

Jesus Christ that thing is a work of art. My hands cramp up on 1/10th scales and I don't want to imagine it with this scale chassis.

@SeanLewisMedia 3 месяца назад

Its pretty spectacular that they were able to engineer everything so small. Its kinda of a pain to adjust but they did a really good job making almost everything easy to adjust. Thanks for watching!

@akura2 3 месяца назад

I work on 1/32 scale Orlandoo trucks all the time...LOL... and I've built 1/87 scale crawlers from Herpa Military miniatures.... now THOSE are a PITA

@SeanLewisMedia 3 месяца назад

@@akura2 1/87 is crazy!

@hvnspd5 3 месяца назад

I just finished building my V1. Learned alot though while building at this scale. Quality tools is a must. Great video man. 🤙

@SeanLewisMedia 3 месяца назад

Thats awesome! I got lucky, and unlucky with it coming built. I definetely am going to have to really learn it for the first time if I ever take it apart. I appreciate it!

@VS666 3 месяца назад

Wow the quality is off the charts. I’d love to build a 10 scale Shark someday, no point right now since my closest track is 3.5 hrs away. 24 scale opens up a lot of opportunities though!

@SeanLewisMedia 3 месяца назад

Its very impressive! I really like the idea of the 24th being perfect for those far from a track. I could also see other tracks making some space for them as they get more popular!

@dillonnrc 3 месяца назад

My batch 1 came completely unassembled LMAO. I'm jealous

@SeanLewisMedia 3 месяца назад

I got lucky lol!

@Gwirisarius 3 месяца назад

Thanks for this amazing vidéo ! 😋

@SeanLewisMedia 3 месяца назад

Thank you!

@deniselewis2724 3 месяца назад

Great build Sean

@SeanLewisMedia 3 месяца назад

Thank you so much! I’m really excited to be able to drive this little guy!

@alboneMS3 3 месяца назад

Guess I know what my next build is going to be. Already in my cart at SuperG!

@SeanLewisMedia 3 месяца назад

Its a sweet little car! Take your time setting it up and it will feel legit like a big car. I was just doing some driving in back yard and I didnt want to stop haha

@akura2 3 месяца назад

My version 1 was a fiasco... I'm so pissed that they come almost completely assembled now... I shoulda waited.. oh well.. I thought I was gonna miss something not getting a V1 (I have a V1 RhinoMAx 1/10 and it's super rare now)

@SeanLewisMedia 3 месяца назад

Thats unfortunate for sure and Im sorry you had to deal with all of that! I know they were trying to make it right with everyone who had issues but i for sure got lucky getting it built! Ya the Rhinomaxs are crazy!

@akura2 3 месяца назад

@@SeanLewisMedia If I had known there would have been a V2 I would have waited... but if the V1s would have been a one-time thing I woulda kicked myself if I had missed it.... it's a shot in the dark...LOL

@SeanLewisMedia 3 месяца назад

@@akura2 I totally understand that! You never know!

@donavinmoller2432 3 месяца назад

Man I love 24s the only downside is price but to me it's worth it to buy a shark SO AWAY I GO

@SeanLewisMedia 3 месяца назад

They really are cool! More fun than I realized too! Have fun with either!

@hvnspd5 3 месяца назад

Does that battery fit in the stock battery location?

@SeanLewisMedia 3 месяца назад

Yes it fits across the chassis as intended. The battery fits better sideways so it put the leads facing forward or backwards so I would have had to add loner leads to the esc. I just dont have any extra wire so i got createrive to keep the battery terminals close to the esc,

@DabbathaHut 3 месяца назад

This one had a rough launch from what I seen on the small scale drift Facebook page. But they seem to have helped everyone and tried to make it right. I got my first mini drift car 3 months ago. Bmrx evo is what I got and I really wish I had went a different route lol but it sucked me in being almost ready to run 😂

@SeanLewisMedia 3 месяца назад

Yes you are correct these did have issues in the first run. This batch seems dialed in though. Its for sure tough with the rtrs, I always want to keep it simple but end up changing everything lol

@OldeSchoolRcUk 20 дней назад

Where do you get those electrics from please. Can you send me links buddy

@SeanLewisMedia 20 дней назад

I have the links in the video description👍🏼 The battery is the only one I do not have a link to but it’s a Reflex Racing micro 2s

@SC4DR1 3 месяца назад

Thanks for sharing new content in this genre! Grew up racing 1/10th scale, and futaba/spektrum radios. Can you recommend a decent transmitter and micro receiver combo for these things? Getting ready to pull the trigger on a dumbo cheapy on Amazon. Thanks man!

@SeanLewisMedia 3 месяца назад

Your welcome! I was the same way racing 1/10th buggy out door in high school! So much fun, and finding the drift side last year has reignited everything for me! So Im currently running Futabas lower end 4pm Plus, for the rc drift side of things they are the king of the game. If you think you might want to go a bit deeper into the hobby again I would suggest starting there if you can and want too. Its around $250 without a reciever and you would only need to grab a micro reciever for around $50. Its not cheap but you can add 20+ cars to it so if you caught the bug again you would be set for a while. Mine has 8 cars on it at this point and I just got reback into rc last year lol With the micro receivers that are available your kind of locked into that radio price point across the board with either futaba 4pm, sanwa/airtronics mtr, or the Flysky Nb4. I shop at super-g for most of the drift stuff because they have the best selection of those kinda hard to find bits and almost every kit on the market so if you want to see the mini stuff available I would check there to just see what stuff cost🤘🏼 Hope this helps!

@SC4DR1 2 месяца назад

@@SeanLewisMedia Thank you! I just got myself a kit from super g!

@SeanLewisMedia 2 месяца назад

@@SC4DR1 let’s go🔥🔥🔥

@4367436 2 месяца назад

Notice you changed the connect to 2mm bullets for the battery, do you just cut off the current jst connector and solder on the new 2mm bullets!?!

@SeanLewisMedia 2 месяца назад

Yes you are correct. I just cut them and solder the 2mm bulltets.

@4367436 2 месяца назад

@@SeanLewisMedia awesome man! Thanks for the quick reply

@SeanLewisMedia 2 месяца назад

@@4367436 no problem!

@Danny.fb6 2 месяца назад

Can I use that servo right out the box or do I need the programmer?

@SeanLewisMedia 2 месяца назад

I’m using it right out of the box with no issues👍🏼

@Danny.fb6 2 месяца назад

@@SeanLewisMediafuck yeah lol 👊🏽 thanks. Just using endpoints huh on remote?

@Danny.fb6 2 месяца назад

@@SeanLewisMedia I’m also running the same set up on my car lol 👍🏼

@SeanLewisMedia 2 месяца назад

@@Danny.fb6 it’s a great setup🔥

@Danny.fb6 2 месяца назад

@@SeanLewisMedia I’m having trouble setting up my gyro 🙃

@calvinwolf7107 3 месяца назад

May I ask when ya ordered this, I've kept up a bit but last I heard they pulled them from the shelves until the batch #2 was finished, Have been seriously wanting to order one 😅 Awesome to see build videos on these smaller scales 🤘🤘

@pavlestamenovic2437 3 месяца назад

Yeah, they had massive QC issues at first batch distribution. Several issues with high frequency of failures, issues like crap instructions, to missing parts, to parts not being drilled properly etc. Since then, various stores have been working with Rhino racing to assist customers who received those earlier kits to sort out their issues. For the next batches, rhino racing is being a lot more careful with QC. For me for example, I preordered early, but from Australia, and I live in NZ. We are slower to get things down here and the store I purchased from basically told rhino not to bother sending them the kits to distribute until all QC has been fully checked over. Hence, because we receive things slower down here, the store was able to step in before the first batch was distributed. We are still waiting though :D

@SeanLewisMedia 3 месяца назад

Yes exactly as @pal es above mentioned. They had issues in the first batch and are starting to get the second round out now. They did have issues with batch one and have made it right with everyone that had issues so far. This next batch so far has been good from what I’m seeing and hearing from the guys at the track. They should be back up soon for orders, Super-G is the best place that I know of and they will help you if you have any issues! I’m glad you enjoyed the video!

@SeanLewisMedia 3 месяца назад

@@pavlestamenovic2437 I’m glad you were able to put them on hold until they got it all sorted!! You should be getting some super dialed kits in! Thanks for the comment explaining everything as well!

@corymckenzie4078 3 месяца назад

@@pavlestamenovic2437who in Australia did you order through I'm in NZ aswell and would love one

@HOUSECAT47 27 дней назад

Where do I get the spur gear for the motor?

@SeanLewisMedia 27 дней назад

You'll want to look up "Pinion Gear"

@HOUSECAT47 27 дней назад

I mean pinion gear sorry

@SeanLewisMedia 27 дней назад

@@HOUSECAT47 I have a bunch of losi pinions, I’m not sure what size I’m using though. I have a bunch of different sizes from my racing days that fit if I ever need to change it. I think I’m using a 19t pinion

@HOUSECAT47 27 дней назад

@@SeanLewisMedia thank you for that and actually hunting for one I found that furitek makes brass pinion gears for their 1/24 scale motors so ima try that but liked to talk about it here incase anyone else is on the hunt

@SeanLewisMedia 27 дней назад

@@HOUSECAT47 Ya its a little harder to find the small ones and mine is just a press on. Sorry I was slightly confused that this was for the mini lol!

@drzaizenko555 3 месяца назад

Cool ！！

@SeanLewisMedia 3 месяца назад

Thank you!

@RCfanAddict 3 месяца назад

Over $500 for a 1/24 scale drift what a joke

@SeanLewisMedia 3 месяца назад

People are allowed to spend their money how they want and this is in the exact range of the rest of the market. The chassis is $200, the 1/10 scale version of the Shark cost $1200 for a roller so its pretty reasonable when you compare it to the rest of the market. I hear you though, its still a lot of money.

@Danny.fb6 3 месяца назад

You don’t have to buy it if you don’t want to, but don’t fuck it up for me lol I’m spending the 500.

@JordanColeman-r8w 2 месяца назад

Yeah........ people have hobbies they enjoy and are willing to put THEIR hard earned money into it as they want. Unfortunately broke people will always laugh at them........