NEW 330oz HIGH PERFORMANCE Servo from TRAXXAS!!

Подписаться 74 тыс.

Просмотров 22 тыс.

50% 1

The servo took some abuse and lived perfectly
Traxxas High torque 2250 Servo
traxxas.com/pr...
To fit the UDR sand tires on the truck here is the parts list:
XO1 Castor blocks ( 1 )
traxxas.com/se...
Steering Block ( 1 )
traxxas.com/pr...
Outside bearings ( 2 )
traxxas.com/pr...
Inside Bearings ( 2 )
traxxas.com/pr...
Front Driveshaft ( 2 )
traxxas.com/pr...
Rear Driveshaft (2 )
traxxas.com/pr...
Rear Axle Carriers ( 1 )
traxxas.com/pr...
UDR Paddle Tires (2 )
traxxas.com/pr...
UDR Wheel Hubs ( 1 ) ( Cut the backs off )
traxxas.com/pr...
UDR Wheel Pins ( 1 )
traxxas.com/pr...
If you feel you want shims to be safe you can get them from ebay for cheap
rover.ebay.com...

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 93

@douglaselliott8298 5 лет назад

Having my servo fail on my Rustler just this morning this tutorial is both hugely appreciated and very well done. Thank you.

@STEVOD313 5 лет назад

Reminds me of the amazon $20 servo with a traxxas sticker on it

@STEVOD313 5 лет назад

U could’ve took the steering link off from the other end of the rod, there’s a hole u can fit the hex driver in to re attach the steering link n then u wouldn’t have to fumble putting it back together

@STEVOD313 5 лет назад

I just looked at mine n ya u could’ve disconnected from the bell crank

@ExocagedRC 5 лет назад

well awesome I have learned something, thank you

@Megasty15 5 лет назад

I'll keep the $20 Amazon servo. You can buy 5 of them & they're faster.

@DB-qm4jx 5 лет назад

Exactly, that why I posted the question up top. Is this "just as good" as the Amazon ones or is it made my a reputable company? Anyone in the industry welcome to respond. Thank you

@minnesotanice369 3 года назад

I also put 3m silicone around all seals it works great

@DirtBike12oClock 4 года назад

Servo horn should be att 1 o clock on Rustler 4x4 vxl

@CSL33 6 месяцев назад

Exactly, as apposed to the 12 o'clock position shown here, which is quite clearly depicted in the manuals. Same thing with the Slash 4x4 LCG. BTW, much easier if you just remove the screw to the linkage from underneath that goes to the servo horn BEFORE removing the front assembly from the chassis. (one screw that connects to the spring loaded bell-crank)

@john3music 2 года назад

My servo just failed me. I really like how you describe the steps. Can’t wait to give it a try.

@majorroberts3198 5 лет назад

I recommend putting aluminum shock caps because in that very uneven sand most likely I think a shock would bend our the shock cap would come out, that has happened to my Rustler 4x4 vxl a lot. And nice 👍 video man

@ExocagedRC 5 лет назад

It’s got GTR shocks on it and so far I’ve had no issues. Thank you for watching bud.

@majorroberts3198 5 лет назад

Exocaged RC thanks!

@majorroberts3198 4 года назад

Lockdown spinning well if you are having issues with the shock caps breaking or popping off, or the shock bending and breaking, then I would get some.

@majorroberts3198 4 года назад

Lockdown spinning yeah I think 4x4s with a VXL will have problems with shocks.

@GeddyRC 2 года назад

Love the explanations and detailed breakdown. Really high quality video, thanks.

@krashkingrc9715 5 лет назад

Another great video wicked slow motion clips some killer bashing nice upgrade

@micronrc3856 5 лет назад

Way more better. Should take the abuse better than the stock servo.👍👊😎

@stpbasss3773 5 лет назад

I put a savox SC 1201mg in my ruslter 4x4 and I put a losi 22 aluminum servo horn on it and it works amazing and not too pricey at 55$.

@ExocagedRC 5 лет назад

Did you have to cut the horn down any?

@stpbasss3773 5 лет назад

@@ExocagedRC no the losi 22 horn is the only one I've found that fit in my slash 2wd LGC chassis so I knew it would be a perfect fit for this rig, it's really short a hair shorter than the stock plastic one and I've used it on a couple rigs including my ecx barrage.

@MrtipRC 5 лет назад

I just installed a JX servo on my rustler , 280 oz @ 08.sec and $15 . Looks just like a Savox , but awesome video 😎

@ExocagedRC 5 лет назад

Yeah I just put the Savox 1258 back in for a race this weekend. I needed the speed and this servo is best suited for a scaler.

@cwatson42785 5 лет назад

I love jx servos. Got one on my maximus and can't beat the value. It's a really good, powerful servo. I don't see the need to buy a high priced servo strictly for my bashers.

@kendesign3622 5 лет назад

$18 amazon servo is definitely a bang for the buck. Plus you get a clamp style aluminum horn.

@ExocagedRC 5 лет назад

which one?

@kendesign3622 5 лет назад

@@ExocagedRC Just surch B073M3X86S on amazon ( second character is zero) I've used these in everything from crawlers to drag cars and they work well with AVC/ TSM Systems too. Love your channel man, you're always to the point with all of the information we're looking for. Keep up the great work!

@stpbasss3773 5 лет назад

@@ExocagedRC it's red and just has a big 20kg and they have a 25kg for 20$ as well they are awesome.

@GreatLakesRC 5 лет назад

Nice video 👍 I have to replace my stock servo. It is doing weird things, not centering then slowly going to center. Just strange, lol!

@JackJurgielewicz 4 года назад

Holy shit you should work for traxxas this video was really well explained definitely worth subbing to, just did👍🙏🏼

@InvisiMan2006 5 лет назад

Powerful, but are they reliable? I've burned through several expensive Traxxas servos and not one $20 Amazon "20kg" Servo.

@ExocagedRC 5 лет назад

We will see because it will end up in a scaler soon.

@stpbasss3773 5 лет назад

I've bought four of those 20kg servos and had them in 2wd, 4x4, and crawler's and they are awesome I even got one of the 25kg ones the same brand for 15$ eBay and it was even more amazing I recommend giving that one a try if you like the 20kg.

@oimate3 5 лет назад

@@stpbasss3773 Yup, installed one of the 25kg servos into my outcast today. Very nice!

@srtallday3655 5 лет назад

I've had the stock slash 4x4 servo for a year and it's been working fine but I still think I'll get this new one

@ExocagedRC 5 лет назад

This is geared more for crawlers IMO but also in this video it was on 6v not 7.4v like it can do.

@Bawla187 5 лет назад

Great video 👍🏿

@ScottzillaRC 5 лет назад

Great job on the video 👍

@dpla9752 4 года назад

Looks like a good match for my revo 3.3

@gadgetmantwincities 5 лет назад

Traxxas also has a 400oz I put them in my 2.0

@ExocagedRC 5 лет назад

How did it work out? I’ll be trying this one in the erevo before too long. Volted up of course.

@coreyroyster3750 4 года назад

Just got it today see what it does

@hanskristianknudsen9485 5 лет назад

I hope you read this and aswer. At 4.10 you say that you are puting the horn back on in the same posistion as on the stock, but look at it, the horn is of to the left on the stock and you put it on straight on the new servo. dosent that efect the steering?

@ExocagedRC 5 лет назад

The old servo arm wasn’t exactly in the center position in that clip. It moved a little. Usually the horn on any will be off by a tiny bit but steering trim can get it corrected.

@LRCR 5 лет назад

That is some hard bashing on that Servo and on the whole truck Great Video ✌️😎 👍 HFLPRCING

@minnesotanice369 3 года назад

connect the drive shaft then screw horn to servo much easier

@cwatson42785 5 лет назад

Will a glitchbuster help with that noise? Great video exo.

@jasonharris630 5 лет назад

Savox!

@DB-qm4jx 5 лет назад

I asked on your other video as well . Does anyone know who is making these upgraded aluminum cased servos for Traxxas. They kinda look like rebranded savox but I can tell by the specs or the top of the casing.?

@ExocagedRC 5 лет назад

Copied and pasted. I honestly don’t think they are made by anyone other than traxxas, the reason I say that is they are big enough to have a servo made on their own and shouldn’t need to rebrand anything at this point.

@DB-qm4jx 5 лет назад

@@ExocagedRC right on thank you for the response. Im sure your right. They are so expensive I was wondering if we could get the "off brand " with the correct length leads.

@ben_way1 3 года назад

how did you put those paddles on the rusler

@ExocagedRC 3 года назад

I have a whole video showing the install and driver with them. But I used X0-1 stuff

@curtishall5910 4 года назад

I'm looking to put a servo in e revo vxl 2.0 what would be my best option??

@Bawla187 5 лет назад

Hey Exocaged, has TP come out with a water proof motor yet? I've been looking, haven't seen any thing on the net yet. Experimenting with my udr..😊

@ExocagedRC 5 лет назад

you can get them with a vented can or a sealed can, I don't think anyone has a truly sealed motor, water gets everywhere

@tag180rotax 11 месяцев назад

Replaces steering servo Drives in a straight line Lol

@johnwagner4559 5 лет назад

For bashing, its a waste of 💰. Just my opinion. Perhaps, spending 100bucks on rpm parts for strengthening suspension would be more advantageous. But, good video!

@mcattee1983 5 лет назад

How come you put the stock ESC back in?

@ExocagedRC 5 лет назад

sometimes its best to test with stock equipment, if someone buys this servo they can see the stock esc can handle it. It will once again be transformed beginning tonight.

@jbird9062 5 лет назад

Thanks for the video. But you can get a stronger/faster $40 servo.

@Megasty15 5 лет назад

You can get a stronger/faster servo for $15.

@mr.boombastic8612 5 лет назад

He said only traxxas parts

@Megasty15 5 лет назад

"only traxxas parts" usually means only working 10% of the time & blowing money left & right.

@HustleGang911 5 лет назад

on my Servo

@TacticalJackalope 10 месяцев назад

Without a BEC you did not get 330 for torque.

@1elaijah 4 года назад

That looks exactly like a 25kg core less for 28 on Amazon

@mpfoote 5 лет назад

$100 for that? It's slow as molasses too. My $20 Turnigy servo is like 240 oz., has metal gears and is twice as fast. I know you're trying to keep it "all Traxxas" but why pay a premium for inferior parts?

@ExocagedRC 5 лет назад

There are those out there that really want to keep their vehicle a certain brand so this will show them what’s available. As it sits right now with mine, all that is out and it’s in racer mode complete with Ebuggy wheels and tires. If I have time this weekend I’ll see if I can video it.

@JKZ103 5 лет назад

Those are way overpriced for the specs.... you could get a refs rc or holmes hobbies or savox for less with better performance. Or even the hk mg959... I absolutely love your channel though!!!!

@ExocagedRC 5 лет назад

I've got a reefs and its awesome, Traxxas has lowered the prices on these so that helps but yeah other servos are faster and better suited to this one.

@jumpstartrc1571 5 лет назад

just buy a jx brushless servo. best bang for your buck

@HustleGang911 5 лет назад

I need help

@ExocagedRC 5 лет назад

ok whats the issue?

@HustleGang911 5 лет назад

Cuz i got a new servo and i put it and it won't keep straight the Wheels

@ExocagedRC 5 лет назад

did you power up the servo and center the horn before installing?

@HustleGang911 5 лет назад

@@ExocagedRC I'm like cunfusd now lol..

@mpfoote 5 лет назад

10 minutes? LOL. Hold one tire. Slowly turn the other tire with your hand. That driveshaft will pop right in in 2 seconds.

@ExocagedRC 5 лет назад

I haven’t broke it yet

@mpfoote 5 лет назад

@@ExocagedRC The "10 minutes" I am referring to is the time that you said that it took you to get the front end lined up and put back on. Do like I explained and it'll go MUCH easier for you next time.

@ExocagedRC 5 лет назад

Oh ok, chances are good I was exaggerating on that a bit. I do know I had to take it apart and adjust the drag link for some reason, I guess I must have turned it somehow

@JKZ103 5 лет назад

Traxxas should be charged for highway robbery $115 at my local hobbyshop for this turd with only 330oz/in at .19 speed, that's horrible speed for the price and the performance a joke. Go with a savox, protek, or even a jx eco boost servo and most of them are half the price and outperform the "traxxas" by a mile. Also exocage all 1/10 servos are "direct bolt in" dont be trying to push this turd on your viewers bro come on man.... good bash

@ExocagedRC 5 лет назад

The direct bolt in part is there because traxxas has a slightly wider bolt pattern and the Savox and other brand servos servos I’ve used required me either trimming the tabs or just picking a side and using large washers on the other side so for that reason these are a direct bolt in.