Тёмный
No video :(

NEW Dirty Dingo Mounts! Has the engine sitting RIGHT! 

DEADBEATGARAGE
Подписаться 70 тыс.
Просмотров 16 тыс.
50% 1

Be sure and show some #dbfam love to fabBot for taking care of us!
Be sure and let them know you're #dbfam if there's anything they can help you with!
Visit FabBots website 👇
www.fabbotfab.com/
FabBot on Instagram
fabbotfab?igshi...
FabBot LS into Colorado mounts we're using.
www.fabbotfab.com/products/fa...
FabBot adapter plate bundle we're using
www.fabbotfab.com/products/fa...
FabBot Power steering adapter kit we're using.
www.fabbotfab.com/products/07...
in today's video we install the 5.3 l third generation LS out of a 2001 Chevy Tahoe into my son's 2007 Chevy Colorado. huge thanks to Fabbot for the conversion kit! The AR5 to LS transmission adapter made things super simple! especially bolting the LS into the Colorado using the fabbot LS conversion mounts made it seem like it belong there, we also don't have to go through the hassle of figuring out how to run the power steering lines thanks to the Fabbot power steering conversion kit. just about everything was a direct bolt in, only thing that had to be trimmed was the engine cradle to clear the LS into Colorado conversion mounts. LS swapping made simple! thanks once again to Fabbot. highly recommend using their products in the links above for any of your LS into Colorado / canyon needs!
Want to help with the builds?? Follow the links below!
Become a Patreon here
www.patreon.com/user?u=22862832
Buy merch here
deadbeatgarage.myshopify.com/
Send Me Stuff Here
Bravus Jeffries
P.O. Box 23398
Phoenix AZ 85063
Follow me on social media
Facebook
RU-viddeadb...
Instagram
deadbeat_ga...
Built Not Bought group on Facebook (fixed the link)
/ 768216480031651
Thank you all for the love and support you have shown, it is greatly appreciated!
Check out all the links below! Help support the companies that support the channel! #dbfam
MPC Motorsport website! Full of badassery!!
www.mpcmotorsport.com/
MPC Motorsport on Instagram
mpcmotorspo...
Looking for some custom fabrication!? Get ahold of Sic Industries, LLC.
Facebook
/ sic-industries-llc-529...
Email
sicindusrties@hotmail.com
Visit Finish Line Factory for all of your AN line needs!!
Finish Line Factory Website
finishlinefactory.com/
Enter "deadbeatgarage" at checkout to receive 10% OFF!!
Finish Line on Instagram
finishlinef...
Finish Line on Facebook
/ finishlinefactory

Опубликовано:

 

5 июн 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 56   
@thatfiek3027
@thatfiek3027 Год назад
That steering shaft is so gonna smack that header under load. If you can I’d trim down a tiny bit of metal off the shaft..
@Mr.Wongburger
@Mr.Wongburger Год назад
May have to clearance the header the old fashioned way.
@trentdawg2832
@trentdawg2832 Год назад
BFH
@cbdreamer1709
@cbdreamer1709 Год назад
This project is the best ever! Going to be super cool. Can’t wait!
@Low89jr
@Low89jr Год назад
Build is looking so good. Thought I mention oil pan is safe from speed bumps based on it being in line with the front wheels, a rock or a pot hole would be my concern
@promotiveeng
@promotiveeng Год назад
What’s up with the ef sedan?? You get that thing running yet?
@BETdaF250
@BETdaF250 Год назад
Keep em coming! Love the DBFam
@willmatic84
@willmatic84 Год назад
💪🏽😤 this bulid is official loving the uploads 🤙🏼#dbfam
@shawnjacks3505
@shawnjacks3505 Год назад
One of my favorite parts of your videos is seeing the dogs
@tavio5574
@tavio5574 Год назад
Nothing like getting home from work to some DBG, time to chillax!!
@LooseFab
@LooseFab Год назад
i just got some dirty dingo mounts for the LS swapped datsun im building over my channel. glad to hear they fit up well for you!
@SuperPanza
@SuperPanza Год назад
Dang that fight 🎉
@75rdube
@75rdube Год назад
Pick up some 90° ends for your plug wires.
@tegnando2697
@tegnando2697 Год назад
Yes sir 💯💪🏼
@rico55pr1
@rico55pr1 Год назад
You want ptfe for the high presure side of the PS regular 6an can burst
@yagerontop4103
@yagerontop4103 Год назад
Please put a sign skid plate would fit u from your past
@GlassWerx
@GlassWerx Год назад
Find u some plug wires that have 90 or 45 degree boots on them. I had a square body s10 blazer like yours with 350 swap and that's what i had to use bc same issue woth steering shaft hitting the plug wire booy
@madscientistmotorworks7621
@madscientistmotorworks7621 Год назад
Can’t wait to see this and the Colorado running. By the way, quick question. I was one of the hat winners from the Ruckus raffle. Just wondering if you shipped them out yet cause I may be moving soon so I wanna make sure it goes to the right addy.
@reginaldgarcia6699
@reginaldgarcia6699 Год назад
Yeah DBF
@josebeltran702
@josebeltran702 Год назад
MSD plugs will work for the LS swap
@cbdreamer1709
@cbdreamer1709 Год назад
Pro tip on the an line. Tape it
@Juancho0524
@Juancho0524 Год назад
Need to get your zinc coating perfected and freshen up all the bolts. Looking good tho!!!
@AntonioEscobedononidajesus_
You should have parker make the hose for the high pressure side
@rico55pr1
@rico55pr1 Год назад
Or ptfe 6an
@AntonioEscobedononidajesus_
@hector leon yes the regular an hose will burst
@janvos4375
@janvos4375 Год назад
Its coming together. ✌🏻🇳🇱
@MegaSpool
@MegaSpool Год назад
I didn’t have any luck with those valve covers. Mine leaked bad, bad. I would up getting a set of summit cast ones.
@victorwilks88
@victorwilks88 Год назад
I'm here for puppas!
@Irrelevantskill
@Irrelevantskill Год назад
Vibrant makes 90 degree stubby 6an adaptors for under 20
@mahdialsadiq349
@mahdialsadiq349 Год назад
Look in to motion raceworks breathers
@drdeath8179
@drdeath8179 Год назад
My boy had a 350 in a s10 blazer back in the day shit was lit
@Fackler91
@Fackler91 Год назад
Motion got the value covers
@kylesteigerwald7325
@kylesteigerwald7325 Год назад
Hey bro you can get a coil relocation kit, moves the coils off of the valve covers.
@justinguarino201
@justinguarino201 Год назад
Multi deleting the break booster since the valve covers will stick out an additional inch causing that rear spark plug/coil pack to make contact with the booster?
@life.is.to.short1414
@life.is.to.short1414 Год назад
Bro, you should of zinc plate your bolts.
@ricardorey5
@ricardorey5 Год назад
Those an fittings are rated for the pressure in the p/s system
@Dragonfabb
@Dragonfabb Год назад
You can get a valley cover with a vent
@deadbeatgarage
@deadbeatgarage Год назад
🤔🤔 oooh really? I'ma look that up
@bobfeber1099
@bobfeber1099 Год назад
You're gonna need to put heat shielding on that brake booster from all the engine heat so close
@trentdawg2832
@trentdawg2832 Год назад
Are those AN lines gonna hold up to that pressure from the power steering😮😮😮
@4475sk
@4475sk Год назад
#dbfam
@nicholasstringer8025
@nicholasstringer8025 Год назад
Just get a coil pack relocation kit and spark plug wire clearance problem solved
@andresaguilar9016
@andresaguilar9016 Год назад
Paint match the crank pully gold or black
@danielramsay2680
@danielramsay2680 Год назад
Be good for hardware to have a electroplated setup aye
@nicholasmacausland
@nicholasmacausland Год назад
Motion race works has bolt on catch can ports that are baffled
@fernandocordoba-silva4858
@fernandocordoba-silva4858 Год назад
First comment db fam
@trailerTrash104
@trailerTrash104 Год назад
What happened to the big dog
@montemoe
@montemoe 7 месяцев назад
Link for the -6an kit
@davidsilva2318
@davidsilva2318 Год назад
we need a daily toby cam
@101CLOUD
@101CLOUD Год назад
Look up at ATI the do v8 parts
@acef_performance8416
@acef_performance8416 Год назад
Looks like you could of just cut them down and redrilled the holes
@Mrs3Diddy
@Mrs3Diddy Год назад
Anyone else catch that the valve cover didn’t have a oil fill
@DXsal1
@DXsal1 Год назад
It does actually
@GlassWerx
@GlassWerx Год назад
Awesome. Was bored lookn for something to watch
Далее
LS Blazer Converted to ALL AN fuel Lines!
34:39
Просмотров 14 тыс.
Dirty Dingo OBS 88-98 Trucks Chevy Install
18:12
Просмотров 6 тыс.
Top 5 Mods To Make An LS Engine Reliable.
24:02
Просмотров 826 тыс.
Torana Hatchback LS Swap EP.1
13:46
Просмотров 3,3 тыс.
Dirty Dingo Motorsports on "Truck U".
5:08
Просмотров 6 тыс.
KAYLEE'S S10 LS SWAP BUILD the DEATHWISH LS10 | DW18
29:36
DIY Stand Alone LS harness for my S10 Blazer!
35:51
Просмотров 13 тыс.
LS Swapped S10 Blazer is looking BEAST!!
32:03
Просмотров 21 тыс.