Тёмный

New Milwaukee Power Tool Accessory That 99% OF PEOPLE DON'T KNOW ABOUT! 

VCG Construction
Подписаться 611 тыс.
Просмотров 705 тыс.
50% 1

New Milwaukee Power Tool Accessory That 99% OF PEOPLE DON'T KNOW ABOUT is the Milwaukee tool M18 & M12 Super Charger (48-59-1811). We put the new Milwaukee Power Tool Accessory (M18 & M12 Super Charger) Through a timed test to see how much faster and cooler Milwaukee's M18 & M12 Super Charger could charge the REDLITHIUM HIGH OUTPUT HD12.0 battery (48-11-1812) against the Milwaukee tool M18 and M12 Rapid Charger (48-59-1808) Wait till the end for special information about the new Milwaukee power tool accessory that 99% of people don't know about!
Use these links below to buy M18 & M12 Super Charger & VCG Construction may earn a commission:
shrsl.com/1onyb
homedepot.sjv.io/JvYPR
Get #VeryCoolGang Merchandise here! : vcgconstructio...
The Milwaukee tool M18 & M12 Super Charger (48-59-1811) was sent to us for review by Milwaukee Tool

Хобби

Опубликовано:

 

5 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 647   
@mikemills8765
@mikemills8765 4 года назад
I'm all in on Milwaukee Fuel cordless - didn't need a Milwaukee commercial.
@TRUESTHEART.
@TRUESTHEART. 4 года назад
💜💜 you read my mind but the m12. 1/4 haVe different models. What's the diff babycakes,
@mikemills8765
@mikemills8765 4 года назад
@@ar-sithf.austin3744 You stated the Fuel was only for "Industrial Maintenance and Industrial/heavy equipment maintenance". and "General everyday applications will never need the FUEL system". That's what I take issue with. But if all you use is M12 - you wouldn't know what builders use in the real world. Stick to your Craftsman cordless.
@mikemills8765
@mikemills8765 4 года назад
@@ar-sithf.austin3744 If it's not "what I Stated" how did it get in your post?
@kikenium1
@kikenium1 3 года назад
👏👏👏👏👏👏👏👏👏👏👏👏
@petecarroll3949
@petecarroll3949 3 года назад
Whose going be the first to come out with a corded/ cordless line of tools.
@jmwarden1
@jmwarden1 2 года назад
Hey Vince, when Milwaukee first came out with the Super Charger I order one from Northern Tool, they had a special deal, the charger plus I believe a 9 amp battery for the price of just the charger, it was on order for months and they finally gave up getting it and so did I, After seeing that demo I'm content with my 3 Rapid Chargers. Thanks for the great videos
@jfloydsea
@jfloydsea 3 года назад
Just remember that the faster you charge a battery, the fewer cycles you’ll get out of it. For the most longevity, use your slowest battery charger (lowest amps). Only super charge if you really need it quick.
@andrewcaballero6288
@andrewcaballero6288 2 года назад
Damn how do you know this?
@chicoandthem4n
@chicoandthem4n 2 года назад
@@andrewcaballero6288 this is common knowledge, all batteries work like this.
@imashbuttons1734
@imashbuttons1734 2 года назад
@@andrewcaballero6288 charging them faster heats them up more
@truthserum9157
@truthserum9157 2 года назад
Your all wrong, it’s heat that destroy’s batteries not how fast, if the charger has a fan then you can increase the the amp rate charge with shorter time.
@jfloydsea
@jfloydsea 2 года назад
@@truthserum9157 chargers have fans to cool their internal components. I’ve never seen a charger that cools the batteries.
@draytonPW
@draytonPW 5 лет назад
I have an old Black and Decker drill/driver. It has a puny 1.3ah battery. The charger is painfully slow, 4-6 hours for a 1.3ah battery slow. Over 6 years later the 1 battery it came with still works great and still has over 1ah of capacity. My point, if you don't need "Supercharging" stick to standard. Maybe invest in an additional battery instead. Your battery packs will last longer.
@VCGConstruction
@VCGConstruction 5 лет назад
Thanks Drizzy!!
@mjc8761
@mjc8761 5 лет назад
Very informative! Super charger looks awesome I will need to get it for my husband 😊
@VCGConstruction
@VCGConstruction 5 лет назад
Sounds good MJC!
@kmacnumber2
@kmacnumber2 5 лет назад
MJ C wish my wife would buy me power tools.
@trolling4dollars816
@trolling4dollars816 5 лет назад
I respect Milwaukee tools, especially the corded version. As a business owner, too many batteries and tools walk off the job site. For my business (and for homeowners) Ryobi is the way to go for cost effectiveness. I still have a corded 30 year old Sawzall, and a 25 year old 1/2" corded drill, as well as a 25 year old Bosch jig saw. Buy quality tools if you can keep it from walking away, buy cheap for ones that walk away, or just die early (4.5" grinders). There is a place for quality tools, and for Harbor Freight type tools.
@dustymanjuiice4445
@dustymanjuiice4445 2 года назад
this is a terrible piece of advise 🤣.. if you have issues with your tools being stolen then maybe you should rethink your strategies.. telling ppl to buy cheap because of theft is not the way 🤣🤣
@joseperz27
@joseperz27 4 года назад
I've gone through 3 m18 fuel sawzalls and 2 m18 super hawgs as a plumber I use my tools daily and I found that their electronic components are their weak point because I have the corded versions and haven't had any issues with the corded versions
@mickeyhenderson7704
@mickeyhenderson7704 4 года назад
I am super V.C.G. fan here! Just my input on charging times. If you used a power strip to power those chargers it might have played a role in charging times. Surge protector power strips will slow down the amp draw that power strip can process. The other thing to look at here is which charger was plugged in closest to the power source because it will become primary on amp draw. Maybe try two completely separate circuits with no power strips and same size/brand/length 10 gauge Extension cord. I’m only speculating, but maybe I’m not. Wonderful videos, awesome insight and amazing energy! Stay true!
@dan69golf
@dan69golf 4 года назад
Maybe at the 1hr blinking, it took 14 min and cooled down from 102 to maybe 90 degrees. You should have checked temp at blinking vs solid green. BUT let's retest 😎love the info KEEP IT UP.
@jerrysmith9935
@jerrysmith9935 3 года назад
There's nobody else that explains or test as spot on as your channel keep up the good work always in real life use then hear say facts always 💯 percent getter done
@shalebieber6111
@shalebieber6111 5 лет назад
Been using 12 amp hr Bart and charging with rapid charger . I use it in the small shop vac !!! Unlimited performance 1supper long run time2 I charge it at night ! Love that they now have super charger!!!! As always love your video and your character 💪 keep on rocking VCG👍
@rainman5438
@rainman5438 3 года назад
I watch these videos at supercharged speeds, 2x, so I can cram more videos in a given time. Best YT feature yet..
@bubonictheory1
@bubonictheory1 3 года назад
im a up and coming electrician and just spent like around 700$ and im still not even half way with buying all the tools i need... if trying to donate to a great cause that be amazin! thanks and keep coming with the videos!!!
@jeffstone7912
@jeffstone7912 4 года назад
Battery’s have a certain shelf life. I stopped buying cordless tools. With the exception of a drill and I still use corded drill’s. Do you want to charge your batteries as low as possible to preserve the life of the battery. I think the Best strategy for going with battery tools is to have lots of batteries. Charge them at home at a slower rate after work for the next day.
@LynxStarAuto
@LynxStarAuto 3 года назад
That's what I do.
@kingofthecrease30
@kingofthecrease30 5 лет назад
Vince is supercharged all the time...milwaukee looked at him and got the idea for it 😂
@VCGConstruction
@VCGConstruction 5 лет назад
🤣🤣👍🏻
@TexasBuyer2001
@TexasBuyer2001 5 лет назад
I think Vince's vest was blinking green during the video at the 20 minute mark. Ha ha ha
@joejoe6949
@joejoe6949 5 лет назад
I’m glad to see Milwaukee is sponsoring you brother.
@sklxfrtmuzik6000
@sklxfrtmuzik6000 4 года назад
for real i love everything Milwaukee an this guy takes the stuff i wanna hear favorite channel on RU-vid
@AntonioClaudioMichael
@AntonioClaudioMichael 5 лет назад
Keeping the battery cool as a high ampage is going into the battery is key to keep the cells from dying out
@VCGConstruction
@VCGConstruction 5 лет назад
Yes that is my understanding as well!
@acespark1
@acespark1 5 лет назад
The biggest problem on any site is theft of you brand new $300 battery and maybe the charger aswell
@josephmcdonald1257
@josephmcdonald1257 3 года назад
Does the one key not track the batteries as well I know they have the little signal symbol on it but does that mean you can track just the battery without the tool
@jackjkantrowitz50kantrowit12
@jackjkantrowitz50kantrowit12 5 лет назад
Thank you Vince for helping to keep us informed on both the pro’s and con’s of new products.
@gtm624
@gtm624 4 года назад
Now we just have to fight over receptacles and charging areas 😂
@malan828
@malan828 2 года назад
Always thought of getting one of those inverters in my van and leaving a charger plugged in so while im riding around my batteries will charge.
@paulw9732
@paulw9732 5 лет назад
Awsome vid vince! The super charger seems pretty cool but for 180$ I rather have another battery maybe 2 more batts and keep my rapid.
@VCGConstruction
@VCGConstruction 5 лет назад
I won’t disagree, quite frankly I’d like to see this included with two 12AH batteries in the new 12” miter saw kit!
@paulw9732
@paulw9732 5 лет назад
VCG Construction we’ve seen 2 9’s for 180$ u can get 2 6’s right now for 220$ at acme tool I’m sure there’s a ton of other batt deals around 180$
@dantheman9395
@dantheman9395 5 лет назад
I hope by the time you read this you’ll be at 100k. Congratulations I’m glad you get this kit to get to the bottom of it. 👍👍
@VCGConstruction
@VCGConstruction 5 лет назад
Thanks Dan the man solderholm we appreciate you!!
@ToolReviewZone
@ToolReviewZone 5 лет назад
Awesome, informative Overview bro. Very well done
@VCGConstruction
@VCGConstruction 5 лет назад
Thanks TRZ we appreciate it!!
@johnholland3476
@johnholland3476 3 года назад
My new m18 skilsaw & hammer drill combo out of box charger flashes green / red and won’t charge .it’s the 7 1/4 saw kit
@aaronrepper7649
@aaronrepper7649 5 лет назад
Coptool got 58m and 29 seconds, charging the 12.0 on the supercharger. Guess it depends on the temperature of the battery/ room temp. Also if you could run some more test to see if those times are consistent or if they change. Great video
@VCGConstruction
@VCGConstruction 5 лет назад
That’s probably a good idea!!
@zzmalone6720
@zzmalone6720 Год назад
Vince, you called it 3 years ago with the High Output label below the 12v receptacle, “Optimized for high output batteries”. 👍🏻😎
@VCGConstruction
@VCGConstruction Год назад
I have to rewatch this video now… didn’t remember saying that! Thanks ZZ!
@zzmalone6720
@zzmalone6720 Год назад
@@VCGConstruction right around 25 minutes
@muddybadgers5205
@muddybadgers5205 5 лет назад
Vince they have a patent out for HO M12 batteries using 18650 and 21700 cells. I don't see them making it though. It's very hard to keep the voltage balanced when you have different cells in parallel like that
@nismo4x4n
@nismo4x4n 5 лет назад
not really you can get bms that'll handle a few amps that are smaller than your thumb nail.
@Roblecop
@Roblecop 5 лет назад
Shot in the dark here, maybe the Supercharger's time was averaged over let's say ten charges to account for any abnormalities. Just a thought lol I do think the fan would turn on for the M12 port. I cant see why it wouldn't lol Great video guys!
@VCGConstruction
@VCGConstruction 5 лет назад
Maybe Joshua!
@nicksrandomviews1296
@nicksrandomviews1296 2 года назад
Just started my milwaukee cordless tool addiction yesterday I picked up the 3/8 drive m12 fuel ratchet and it's awesome I wish I had your collection bro but it will come with time lol. Very cool video thanks for the informative video. 👍
@codyramos3200
@codyramos3200 2 года назад
Holidays . Or black Friday , fathers day etc.. best times to invest in Milwaukee tools.
@sklxfrtmuzik6000
@sklxfrtmuzik6000 4 года назад
Milwaukee never seem to stop upping the game love this brand so much am like a Milwaukee ambassador on my site all red and black all day best brand ever
@gagemosley8365
@gagemosley8365 3 года назад
It would be nice if you did the battery breakdown comparison with pictures, or even the actual battery's. It's nice to be able to visualize
@kevindaak859
@kevindaak859 5 лет назад
The blinking green light on the super charger is the cool down period. When the light is solid green it is ready to use.
@mattturner8753
@mattturner8753 5 лет назад
One Milwaukee commercial after another now
@VCGConstruction
@VCGConstruction 5 лет назад
Yup, Milwaukee has so many new offerings its hard to make enough videos quick enough to keep up! Enjoy!
@makaynchealhalibbealkhooo9673
@makaynchealhalibbealkhooo9673 5 лет назад
Nobody:..... Vince: here’s the deal 😂😂
@musicman692
@musicman692 5 лет назад
I have had an M18 HO 12.0 battery for a few months, but have only charged it once. I got it free from Northern Tool with my kit which included a sawzall, hammer drill, and a 1/4” hex impact driver. The 12.0 battery is too heavy for my taste on any of my hand held tools. It would be great for the table saws. The fan in the new charger is to cool the rectifier and voltage regulator circuit on the inside of the charger. If it helps keep the battery pack cool at all, that would be nice, but my guess is, as an electrical engineer, that would be an unintended consequence.
@UnderHisYoke
@UnderHisYoke 5 лет назад
Thanks Vince. Always watch your videos before I go buy my next tool for the school district.
@VCGConstruction
@VCGConstruction 5 лет назад
Thank you for the support Mark!
@coppertop1875
@coppertop1875 2 года назад
Man…I was about to fork over the $$$ for a super charger specifically for my m12 tools. I appreciate the info given I already have a rapid charger.
@user-bq2py9tl5l
@user-bq2py9tl5l 2 года назад
Vince very good info, although fast charging rates will lower the amount of recharging cycles and total capacity of amps of each battery. Just buy more batteries and charge them at a slow rate. Rabbit Vs the Turtle.
@smitty2jones
@smitty2jones 4 года назад
I don't have any of the big batteries, and my M12/18 tools are more intermittent-use type tools (like a 3/8" or 1/2" impact), but my 40v lawn tools definitely have to cool before charging. My first cordless lawn tool was a Worx 18v trimmer. It said it'd charge the batteries in like 30 minutes, but... it took an hour for them to cool down. I had 3 batteries just for that trimmer, and by the time I drained battery 3, it would just be finishing the charge on battery 1. I had a little desk fan blowing over the charger to help cool it faster!
@kingofthecrease30
@kingofthecrease30 5 лет назад
quite frankly...i gotta tell you...that super charger is $170 on sale...$287 list price...and it can only charge either a 12 volt or 18 volt and not both at the same time...thats kinda disappointing...if it has 2 ports it should charge both at the same time
@VCGConstruction
@VCGConstruction 5 лет назад
If it did that would be a huge bonus!!
@mattheweustis9506
@mattheweustis9506 5 лет назад
Have over 12 m18 batteries I use the 6 way charger and break them down in two groups cycling them on my truck. 4 battery’s are 5 or more years old no issues
@TMCX113
@TMCX113 5 лет назад
CONGRATS @VCG Construction ON THE 100k! Yall hit it before July 4th, nice work! 🤘🏻 Keep up the great content and here’s to the next 100! 😎👍🏻👍🏻
@VCGConstruction
@VCGConstruction 5 лет назад
Thank you the minimalist explorer!
@ruggiero1371
@ruggiero1371 4 года назад
I love Milwaukee tools I have over a 100 different Milwaukee tools and they have always performed or should I say out performed what they say it can do I just had Milwaukee at my job site and that is a cool experience
@rvega91722
@rvega91722 3 года назад
yes it does turn on with the m12. I got one from COP Outlet last year
@richoverton493
@richoverton493 4 года назад
I would love to see a corded battery option for when all batteries are depleted and you still have work to do. Is anything like this available?
@AntonioClaudioMichael
@AntonioClaudioMichael 5 лет назад
Super charching is great for productivity and getting back to work faster but could kill the cells in the batteries hopefully the super charger protects the cells as its charging
@kwmiked
@kwmiked 5 лет назад
I'm sure they tested all that with 3yr battery warranty!!! Think they are 1 step ahead of your thinking!! Or they'll be replacing slot of batteries. Cmon
@VCGConstruction
@VCGConstruction 5 лет назад
The red link intelligence is supposed to mitigate those issues Antonio!!
@Badass_Rooster
@Badass_Rooster 4 года назад
That funny that you mentioned the sizzle sound. I mounted 2 of them tome metal divider wall I my van between the cab and back. Now that sizzle sound is magnified behind my head. I picked my wife up at work and she asked what the noise was.
@VCGConstruction
@VCGConstruction 4 года назад
Thanks for sharing your experience
@whattheheck5083
@whattheheck5083 5 лет назад
Damn! I just bought a new rapid charger now they come out with a super charger! I’m getting tired of being nickel and dimmed. Vince can you run a test with a hot battery? Thanks!
@scottsyverson4260
@scottsyverson4260 2 года назад
Cordless tools are great for certain jobs but I rely on corded tools most of the time. Either way, you still have to get power to a site, be it generator or temp power pole to run your battery chargers and compressors. So there is little extra effort to run heavy duty cords as a branch line to different floors or rooms where you'll be working. Additionally, cordless tool just don't have the continuous torque of a corded tool. Sure they'll do fine for the first half dozen cuts, but then the power starts to draw off.
@williamabaker12
@williamabaker12 Год назад
I can rip 2x PT over and over and over again with my milwalkee m18 7 1/4 circular saw with a 12 Amp hour battery, and never have a drop in torque. I've got several batteries and the charger charges a dead battery long before I can use one up. Cordless has come so far, they can be used in all but the most intense scenarios. Well, the expensive cordless tools can. Lol
@sugargoldy
@sugargoldy 5 лет назад
Good video Vince I wonder what the longevity is on charging those batteries that fast and do you think they'll ever make a bigger battery than the 12.0
@robgarcia4426
@robgarcia4426 5 лет назад
18 min in i realize.... dang hes got the milwakee phone charger cord too haha nice
@VCGConstruction
@VCGConstruction 5 лет назад
😂😍😍👍
@ftlaud911
@ftlaud911 5 лет назад
For my needs I use the standard charger. Have many rapid chargers, but want to charge at lower amps which will prolong battery life. I have plenty of batteries to do any job so no rush for me. Yet to kill a battery yet.
@markchidester6239
@markchidester6239 3 года назад
My rapid charger charges both at the same time. Love it! Problem is that I'm done with the m12 tools. The #$&@(+/ batteries don't stay in the tools that have vibration such as the multi tool and hackzall. I specifically bought the m12 version of the hackzall over the m18 because it has a shorter stroke. Works great for the tight spaces. Was fine for a while, then the battery lost its grip and vibrates out. Impact tools are ok, for now. Wish they would fix the problem because they worked great before this happened.
@jmwarden1
@jmwarden1 2 года назад
I must have improved M12 batteries because I have a real struggle getting them out of the tool to charge them. I also believe my Rapid Charger will charge both M12 and M18 at the same time.
@ericarmstrong2412
@ericarmstrong2412 5 лет назад
I can’t be the only one wondering if the run time is lowered by using the super charger over the rapid or basic charger. That would be a test I would love to see.
@ryleynoyes
@ryleynoyes 5 лет назад
Run time should be the same, it just charges at a higher amperage or voltage. Battery longevity (how well the battery life is over multiple charge/discharge cycles) may be affected
@ericarmstrong2412
@ericarmstrong2412 5 лет назад
Well for example charging a car battery for say a trolling motor on a boat... if you do a fast charge it usually dies quicker than if you put it on a trickle charger. I’m not sure if the PCB or the type of 18650/21700 battery in the pack counters this or not. I believe it’s worth a test. I do agree on the longevity statement.
@getbetterben4312
@getbetterben4312 4 года назад
@@ericarmstrong2412 Car batteries are lead acid. When Milwaukee used to use NiMH batteries, they were affected by the charge rate and also if you let the battery go to zero percent - they used to cell battery conditioners to fix this. Lithium Ions aren't affected by charge rate or depletion like the other two.
@robertkwiatkoski1292
@robertkwiatkoski1292 2 года назад
I thought the same thing about my cell phone battery. thought slow cordless charge was better. Clerk said slow charge creates too much heat. when using the rapid charge I seem to need to charge it more??
@ar-sithf.austin3744
@ar-sithf.austin3744 4 года назад
Milwaukee Fuel is the best you can get for power, charge time and holding, and overall average length of service for your dollar. You'll generally burn out an Dewalt XR especially with the 60V flex Fuel battery long before the Milwaukee. Even if you don't invest in the FUEL grade Milwaukee stuff all their others are great too. As a person who has worked in industrial maintenance as a Millwright and now on tractor trailers you can't beat them. Their new 1" Impact with the 9 amp battery that hits at an incredible 1850 lbs of nut smashing torque only weighs 10 lbs! Compare that to lugging an air powered Ingersoll Rand 1" impact around and you know what I'm talking about. Busting off 40 nuts on a Kenworth and replacing them in a tire change out on a the rig will wear even the best inshape man down whose pushing over the hill age after 4 out of service jobs plus other work in a regular shift. That's taking off and putting on a total of 320 individual movements with the heavy IR impact. The new Milwaukee will bust nuts off a 40 year old front end loader rusted tight like it isn't shit. There is a video that proves it.
@AntonioClaudioMichael
@AntonioClaudioMichael 5 лет назад
Nice batteries and the new super charger
@monroekunz2070
@monroekunz2070 2 года назад
I have the 12" compound & the table saw with stands. Wish Milwaukee would have made them with cord option & built in charger like they did my light.
@caps741
@caps741 5 лет назад
Charge times can change if you use a power strip as well. Not all power strips put out the same power to all ports. If the super charger isn't getting the full power it needs, charge times will increase.
@ЕвгенРепка
@ЕвгенРепка 5 лет назад
Hello, thank you for interesting reviews tool Milwaukee, it is a pity that new items can not be bought from us in Russia.
@jonnygarland4741
@jonnygarland4741 3 года назад
These are MUCH better tools that any DeWall tool's really last much longer and much more durable and tougher Makita tools really is a great GOOD tool 👍
@djcarkhuff
@djcarkhuff 5 лет назад
TL, DW: Milwaukee makes a super charger for your batteries that charges quicker than the rapid charger
@MrWzeljunior
@MrWzeljunior 5 лет назад
Not the hero we deserve, but the hero we need.
@mikey111482
@mikey111482 4 года назад
Now what am I supposed to do with this extra half hour of free time?
@BluCappy419
@BluCappy419 3 года назад
Bonus round: M12s charge the same on both.
@joedillon159
@joedillon159 5 лет назад
If heat kills these batteries then isn’t the smaller cooler charger better in the long run if you’re not in a hurry? Your own tests on this video show very high temps that not even a fan can help. All things considered for more years of battery life I’ve got to believe cooler charge is better.
@justtrinalynn
@justtrinalynn 5 лет назад
It would be nice if they would have made the Super a little more compact with only an M18 port. Good video!
@VCGConstruction
@VCGConstruction 5 лет назад
you don't like the ability to charge M12 on this charger? Thanks Trina!
@justtrinalynn
@justtrinalynn 5 лет назад
VCG Construction ... I like the charger regardless, but if you have an a M12 in it and you are charging a M18 it’s temporarily useless. I thought that they should have made proprietary for the M18 platform but that is only my opinion! Personally I like having a separate gang M12 Charger like the 48-59-1204....I hope that they make at least a dual Super Charger for the M18 platform or even an even larger one that can both charge and or be a 2000 watt power supply. Definitely not the last charger that Milwaukee will bring to market!
@mz7242
@mz7242 5 лет назад
I believe fast charging shortens the overall battery life , so batteries would not last as long meaning having to buy batteries more often......the house always wins
@EricSmith-lj7ln
@EricSmith-lj7ln 5 лет назад
Not with the biggest batteries.
@kalinbanks144
@kalinbanks144 5 лет назад
Congrats on 100K Subscribers guys love your work
@VCGConstruction
@VCGConstruction 5 лет назад
Thanks Kalin we appreciate it!
@Stareingattheson
@Stareingattheson 2 года назад
This guy is in love with his own voice and can easily take 30 mins for a 5 mins talk.
@jasonbourne949
@jasonbourne949 3 года назад
Looking forward on the arrival of the cordless blow jet as a gearbox rebuilder.
@irmaztamal21
@irmaztamal21 4 года назад
11:38 very useful product number explanation. Here in South East Asia the product number sometimes differ from that are advertise.
@klew6147
@klew6147 4 года назад
This guy is great.I can put on mute and understand what he's saying with his hands. Channel is awesome.
@bobchambers5948
@bobchambers5948 5 лет назад
Hey Vince - If the battery is already at 100 degrees coming off the charger, how hard can you run it before it overheats & goes into thermal shutdown? Imagine being on a jobsite in August when it’s 100+ outside so the air isn’t going to help the battery cool down.
@G__Mason
@G__Mason 2 года назад
I love all my Milwaukee power tools but I still got Dewault’s table and miter saw. I would love to make the switch but I wish they had a cord with the option of using a battery. I’d make the switch today if they would do that
@genrock6756
@genrock6756 4 года назад
I would be impressed if they make some kind of adapter you put in the battery port then plug it in the outlet. Or a nuclear powered line up. That would be the best.
@phillipsmith5013
@phillipsmith5013 5 лет назад
I always have a high velocity fan flowing on my battery and fast charger every time I charge my batteries. They stay alot cooler, never even warm to the touch. And they do charge faster because the battery and fast charger are cooler.
@VCGConstruction
@VCGConstruction 5 лет назад
Awesome!!
@dannylee557
@dannylee557 5 лет назад
I actually do the same thing and it does make a difference at least to me it does
@francocalcagni7290
@francocalcagni7290 5 лет назад
I have most cordless brands, Makita, Milwaukee M12 & M18, Flexvolt and others. My Metabo I bought 6 years has a fan on the charger and my first Makita 611 cordless saw bought in 2008 had a fan on the charger. Why has Milwaukee taken so long to cool batteries when charging?
@baddecisionsoff-roading3243
@baddecisionsoff-roading3243 4 года назад
Ps. Milwaukee sold me with my first USED 3/8 impact. Older yes. So what? Did a great job. Broke on me, f it I want the high torque 3/8. BEAST of a gun. All the tools have impressed me. Can’t work without them. I’m lazy lol.
@12GaugeLeadSalad
@12GaugeLeadSalad 5 лет назад
I just got two HO CP 3.0's. They are just as powerful as the standard 5.0 XC but lighter and shorter in height. A little longer and wider, but that is no big deal. I wanted a more compact battery but with the HO CP 3.0, I don't have to sacrifice anything but maybe a little run time vs the XC 5.0.
@VCGConstruction
@VCGConstruction 5 лет назад
What tools do you use the HO 3.0 on?
@12GaugeLeadSalad
@12GaugeLeadSalad 5 лет назад
@@VCGConstruction Impact driver and drill driver mainly. My only other Milwaukee tool is the brushed Hackzall. I know from your video the 3.0 isn't a huge weight savings, but I like how it gives a lot of power for the size. For my needs, two XC 5.0's and the two HO CP 3.0's are enough. Once I grab a QuikLok trimmer, I'm sure the 9.0 HD will be enough for that. I'm just a DIY'er.
@Neur4xis
@Neur4xis 3 года назад
Gotta say, in a pinch ya gotta go with the supercharger. But if you have time, the Rapid charger maintain long life for your batteries since they charge cooler than w the Supercharger.
@MrDmadness
@MrDmadness 4 года назад
Green flashmob super charger is when the battery is doing an internal diagnostic, it does this at the end of every charge.
@kennethkuhlman8864
@kennethkuhlman8864 5 лет назад
So after looking at the Milwaukee chart that shows the charge times for various batteries and chargers, it seems like the super charger must charge the HO 6ah, 8ah and 12ah cells separately. The HO 3.0 doesn’t charge faster from the rapid charger to the super charger but it’s only a single row of cells. So does the super charger charge rows of cells separately which would make sense as to why the charge times are so much lower.
@gotjuice7160
@gotjuice7160 3 года назад
When the light holds to a slower blinking, that is the 'balance check of all the cells in the battery pack. For max life, leave the battery on the charger until you get the solid green.
@DanCurrier
@DanCurrier 5 лет назад
Congrats on 100k! You are killing it!
@VCGConstruction
@VCGConstruction 5 лет назад
Thank you Dan we appreciate it!
@garrettgiuffre5653
@garrettgiuffre5653 2 года назад
Development of the product shows it's demand from the people. Not to long ago very few consumer cordless power tools could easily remove the lugs off an avg vehicle. Now for 200$ you can leave a big rig on bricks on a single battery
@LaCatHTF
@LaCatHTF 5 лет назад
Thanks for the “inside scoop” at the end. You know I hang around all the way through! 👊🏽
@noaholiver8163
@noaholiver8163 Год назад
So my only question in regards to the super charger is why did they bother with an m12 port on it and not just two m18 ports? Looking at the comparison between the rapid and super charger the charge time for m12 batteries doesn’t change.
@meagaindave2049
@meagaindave2049 5 лет назад
Great video and very informative! Thanks, Vince, for making us part of the 1% ers. That's why we ring that bell like it's 1776! May God bless the VCG!!! 😁
@VCGConstruction
@VCGConstruction 5 лет назад
That’s right thanks again me again!!
@chrisrhudy2000
@chrisrhudy2000 4 года назад
I think the difference in promised charge time and actual result is caused by how you had the chargers mounted. I'd like to see you try again with them on a shelf sitting on the included feet.
@cabbyhubby
@cabbyhubby 5 лет назад
The job site is not full cordless......the first thing the cordless boys do is plug in their battery chargers 🤔
@VCGConstruction
@VCGConstruction 5 лет назад
🤣🤣
@gmburzynski68
@gmburzynski68 5 лет назад
But,,,,lol,,,Milwaukee does make a 12v charger that plugs into your truck
@mrniusi11
@mrniusi11 4 года назад
except you're not tripping over or rolling up chargers
@NoBody-ro3xj
@NoBody-ro3xj 4 года назад
@@mrniusi11 you have not seen chargers from 5 trades plugged in lol
@davemontano3790
@davemontano3790 2 месяца назад
@@gmburzynski68yes and it’s the best method to charge off of 12 volts because dc to dc appliances do not waste energy. Unless it’s an inverter charger or something. I doubt that because why invert an already 12 v battery. I’m gonna look the charger up now! Thanks
@ultraorange1
@ultraorange1 5 лет назад
So if you’ve got one chop saw and one table saw we need 4 batteries and two chargers. And an electrical source to charge the batteries. So you might need a generator. Or just use the generator for standard saws. Cordless makes so much sense until the tool doesn’t move. Big Milwaukee fan here but I’ll stick with the Bosch compound and a generator.
@wilkowr23
@wilkowr23 5 лет назад
100,074 subs congrats gentlemen
@VCGConstruction
@VCGConstruction 5 лет назад
Thank you ron!
@amoscardoza5253
@amoscardoza5253 5 лет назад
Congratulations on the 100k gentlemen!!! Well done!! #VCG4LIFE!!!! Great vid ,hope they come out with a 4 and 6 port supercharger.
@tomassoyweyvon4902
@tomassoyweyvon4902 2 года назад
Mui Bueno Vicente'....:).....your channel is Bravo!...happy to have found you!
@jasonrojas2176
@jasonrojas2176 4 года назад
I have a 12amp on my Milwaukee fuel backpack vacuum. Lots of power 🔋
@michaelc7283
@michaelc7283 5 лет назад
Hi Vince, It would be nice to see a new version of the milwaukee 10" sliding miter saw. It should have that same style like the new 12" sliding miter saw. I know it's not out yet, but you tried it out at the NPS19. Do you think or anyone else think that the milwaukee 12" should have had two battery slots? Just to have that extra power to run that 12". I still like my corded DeWalt 12" and 10" table saw. I know it's not cordless but on every jobsite i do have power for those stationary items. I have to say i do love my milwaukee m18 sawzall.
@baracktrump1410
@baracktrump1410 5 лет назад
What's the part number of that "M18 Upgrade Kit" in the packout case, that's what I want.
@VCGConstruction
@VCGConstruction 5 лет назад
Tweet at Milwaukee and tell them you want to buy one
@bobedwards7927
@bobedwards7927 2 года назад
Ingenious for Milwaukee. buying new batteried forever instead of a one time corded perchase.
@AntonioClaudioMichael
@AntonioClaudioMichael 4 года назад
I noticed the rapid chargers are only loud when charging high output batteries larger then 6.0ah batteries and high demand batteries they are not loud charging cp batteries or xc batteries @vcgconstruction
@TexasBulldog74
@TexasBulldog74 3 года назад
Lithium batteries don't love being charged above 1C for safety/longevity of the cell. which is why you were confused on the heat difference between the batteries during their charge cycle. For battery longevity and unless you absolutely need that battery right that second id still prefer to use the Rapid Charger at its lower amp charge rate to reduce the stress/heat on the cells which will increase its lifespan.
@Metzger23
@Metzger23 5 лет назад
Silver Play button is on its way soon.
@VCGConstruction
@VCGConstruction 5 лет назад
🤞
@eag8999
@eag8999 5 лет назад
I’ll buy the triple m18 (plus triple m12) rapid charger for the same price.
@syzslakmoe
@syzslakmoe 5 лет назад
That’s a nice battery packout set. (Early) Congrats on hitting 100k!
@VCGConstruction
@VCGConstruction 5 лет назад
Thanks Dane we appreciate it!!
@joshurmetal420
@joshurmetal420 5 лет назад
What is going on 100k 😱. We were just at 30k. Congratulations brother. That happened quick.
@VCGConstruction
@VCGConstruction 5 лет назад
Thanks Josh we appreciate it!
Далее
这位大哥以后恐怕都不敢再插队了吧…
00:16
Cheese grater HACK
00:22
Просмотров 1 млн
Тренд Котик по очереди
00:10
Просмотров 317 тыс.
I don’t get why no one knows what these numbers mean
13:28
Not Just Fake but Counterfeit Power Tools
17:09
Просмотров 410 тыс.
Milwaukee Tools You Probably Never Seen Before
27:10
Просмотров 492 тыс.
Murdering Milwaukee w/ Increasingly Sketchy Batteries
17:06
You Should Buy 12V Instead of 20V… HERE’S WHY!
23:43
EPIC MINI REAL PISTOL
0:15
Просмотров 6 млн
ТАМОЖНЯ БЕЛАРУСИ
0:19
Просмотров 6 млн
#saiho
1:01
Просмотров 1,4 млн