New Milwaukee Tools 7-1/4'' Rear Handle Circular Saw **WARNING** (PROPER SETUP REQUIRED) 

Just drove two hours to go to direct tools and let me say that place is awesome. Got a Ryobi hole saw kit a 7 1/4th miter saw and a 7 1/4th circular saw all for $91. Worth the drive thanks VCG for showing me that place

Vince I've had mine for a week and still haven't opened it. But everything I've seen it's a beast . Update finally got to tear into some 3/4 " osb yea its seriously a beast. Its my experience that this saw is better than a corded saw . Use it on 2x4 , 2x6 . Plywood, paneling. It dosen't matter . Eats it up .

Just bought mine on a Super BMSM Deal at HD for 113 bucks 🤯. I can’t wait to give it a spin. Thanks for vid Vince! You Rock!!

The screw driver on the end of the wrench is for twisting out the diamond knockout on a new blade.

You should do a Makita vs DeWalt vs Milwaukee test. Plus there battery life and cost.

Very nicely done Vince !!! I appreciate your time and effort to help us the VCG in making better and more informed choices when buying tools and accessories. Thanks again for sharing your thoughts and videos, Rodney

If memory serves me correctly, a standard corded skil saw is around 14.5 pounds and the mag 77 is a little over 12.5 pounds. So this hit right in the middle which is pretty good since the DeWalt cordless felt heavier than the corded skil. Even with the extra heft, the time saved by not rolling out or relocating a cord or hose makes these cordless tools total game changers. As long as the weight is distributed properly it has little effect on usability. FYI for the uninitiated the rafter hook we call a sky hook and the “base plate” we call the table in the field. The notch in the blade wrench served two functions, one as stated to unscrew the brushes for cleaning or replacement and it also can break the diamond center out of the blades when required.

these saws are awesome. I love my flex volt worm drive saw. make sure you keep a corded with you. better to have and not need then need and not have.

Whoever mentioned the reason for the tip on the includes tool as the way to pry out the diamond arbor is a boss genius like me.

I think this is my favorite video of you. Funny as hell.

Vince, I understand your love for a left-sight saw, but as a lefty, I thought the manufacturers finally thought of me with the right-sight circular saws. Lol!

With your enthusiasm for power tools and video quality you guys should be blowing up as you very well deserve.

the screw driver on the wrench is also used for the rip guide that slides into the side of the deck. use it on the daily for multiple rips

CONGRATS TO VCG ON 105,000 SUBSCRIBERS !!! 👍👍

Is it just me or does Vince look like a Ghostbuster with that saw in hand and vac on his back?

This RU-vid channel comes threw with information you need to get the job done been in the union 7 in a half years and always wondered about the power of cordless now a days

Defenetly going to buy AND I cant wait for TTR Dewalt vs milwaukee worm drive saw

yeah, I bought it.. it is pretty cool to be cordless on the roof as you over-frame a log home.

Yes, I ordered mine yesterday, 100 CDN $ off, couldn't let go by 🤩

Omg this is the first time I have seen Vince without any facial hair!!!

Unfortunatelly i'm from Italy and HD doesn't ships worldwide, but I bought this beast from Ebay for 229 bucks +shipping and import fees, total of 358 bucks. Can't wait to have it in my hands! 🖤❤️

Great unboxing & video I’m sure my husband will add it to his birthday list!

Corded wormdrive is KING, that one can be queen especially with that purse🤫

Hey Vince as a physics guy the hole is there to provide more suction at the point of entry for the dust. Think of it like an air vent in your plumbing. Air is going to take the path of least resistance so the air channel is going through the house, the dust moving through isn't going to want to escape that path because it would take more energy to exit the air channel than just follow it (eventually ending up inside the vacuum). Great video, love how you test tools.

Shine bright like a diamond!

I have this Milwaukee rear handle and I love it and it’s light..

The 3.0 battery works as well just not as long.

If this saw is half the saw my Milwaukee Fuel 7 1/4 sliding miter saw is, it will be absolutely amazing!

I NEEEEEED IT!............ Ok I want. I’ve also been waiting years for this saw.

Hey Vince. Although, I'm in the Milwaukee 18 volt line and use them often. I bought the 48 volt Skilsaw rear handle wormdrive saw. Have been using almost everyday. I can't believe how much power this machine has, but its power is there when I need it. Thanks for the video 📹...

I love the white blade so much

GO Vince! Had to watch your unboxing as I found an "open box" deal for under $200. 😃 Been a while since I've seen that clean shave, lol.👍🏻 Update 6/10/2024 Just saw one in unopened box for $100 😮

I initially bought the right side blade m18 7 1/4 circular saw... i will tell you this... i loved it but was really interested with the worm style so i ended up returning the right side blade and bought this worm style circular saw.... these are my pros/cons for it... love the ways it cuts (like butter), weight is a tab bit heavier but it has the well balanced feel even with the battery on... i dislike the dust port... wished the additional port attachment didnt have a hole. They should have it closed instead.. So unlike the right side circular saw where dust isn't blowing on you... i will tell you this... with this worm style circular saw and the way Milwaukee outfitted it's dust port.... dust will surely be blowing on you....With that said i still have no regrets with adding this beast to my line of milwaukee tools.

Oh man thank you for making cuts with the saw!!! I was scared u you weren’t going to. Cut everything. My dad has been waiting for this saw since forever

Haha I'm still on the board, awesome! I like how saws are starting to make the blade guard handle shorter so as not to block the saw dust vent.

I use a Milwaukee white blade on my miter saw. No complaints about it.

Great video, great saw.

That bag would be a perfect gym bag

Time to TTR some Circ Saws!!! 🙏😉👌

Cool vacuum. You look like a ghost buster.

Cut some 6x6 green treated and LVLS any good saw should be able to cut sheet goods and 2x4s all day i have the 6 1/2" left and want to get the 7 1/4" but i have a skill saw and want to know that im not going to be stepping down in power

Love your reviews. Has helped me in purchasing tools easier. Keep up the good work

Only because no one has done it yet. Tool and 12.0 HO battery is 14lbs. Pretty good in my opinion. Great video VCG. For a test, I think you got to rip a piece of 4X8 on the 45 degree angle. Does anyone use the cordless band saw? if so, how well do it work?

I use the screwdriver end of the wrench to remove the diamond on anew blade

Hey Vince while I was watching your video on the new w saw something funny happen... the RU-vid commercial in the middle of your allocution... guess by who? De Walt !!! That was funny ! Good day Vince!

I'd like to see run times / performance with the HO 3.0s since i have a lot of them now

I love new toys. Yes, I play with them. I guess we never grow up. 🤷🏽‍♂️

Definitely test with materials that kill most cordless circ saws; such as 2*12 lam beams.

When it comes to worm drive cordless i’d go #1 Dewalt flexvolt #2 makit 2@18=36 v and last Waukee. Just my preference

Shnugg!!! Very Kool!! I can’t wait to get mine!

You look about 15 years younger took me 5 mins to realise why 😂

That friggin' ad right as you are about to make the first cut. 😂 Even if the dust collection wasn't perfect, you could see how much it caught in the backpack vac! I have the DeWalt 7-1/4" XR circ saw, and I wish it was left side line of sight.

Works well with the 3 in 1 vacuum

Milwaukee Ghostbusters... Vince ain't afraid of no ghost

Left facing blade circular saws are the best

I have mostly Milwaukee tools but I went with the battery powered true work drive skill saw.

Joey from Friends long lost brother!

I have a corded left hand circular saw, made by Porter Cable...bought it new in 2001...now, I can't find one. "Left hand" saws just make sense for right handers!

I would love to get my hands on one of these bad boys, I would like to see how well it does cutting through 4x4s at an angle

dust collection never really gets all the dust, just keeps it down so cleanup isn't so bad. It seems to do as good as if it was corded. I like worm drives they seen to allow for more control and straighter cuts. Probably most because of the change in leverage points when operating them.

Lmfao at the singing like a diamond and let our guard down lmfao

I got this saw last month and it's a beast. Tho I'm always covered in saw dust and you'd be surprised on how much saw dust I manage to get in my pockets

That wrench also takes out diamond hole on saw blades

The screw driver on the end of the wrench could possibly be a tool to break the diamond insert from the standard blade. Like the dewalt rear handle has built into the angle adjustment. Black and yellow all the way !!!

got mine a few days ago and i love it just cut some 2x4 with the 4.0 batt did ok need to get that 6.0 HO batt for sure!!

They need to make a track saw.

Thx for the demo vince just ordered mine cant wait to try out when it gets here.

I'm curious why the run time on this saw is listed as 570 cuts per charge when last years 2732 model is rated at 750 cuts per charge with the same battery and what appears to be the same motor. I have the 2732 and have been happy with it, I would prefer a left line of sight saw but have gotten used to using sidewinder style right line of sight saws and don't think I would purchase this one especially if its rated run time is a lot lower. The dust collection seems to work about the same as the 2732 and the table saw, which is to say not very well but definitely better than nothing. I think Milwaukee missed the boat by not expanding onekey functionality to allow a hypothetical onekey vacuum to wirelessly link to any onekey tool and auto start/stop the vacuum when the tool is being used.

🤔 I think they should have a remote on switch on the vacuum with Bluetooth communication to the saw, so vac comes on only when saw is on!

I can't wait for the Ryobi rear handled "worm drive" saw. It's going to be lime green, plastic shoe, running on a very cool 18V system AND powered by real worms. $129 with a 4ah battery BAM!!!

My mag 77 blade wrench has a tab like that and the book says to use it for popping out the round harbors from a new blade to give you the worm drive diamond harbor.

Vincent "I will say this" Carneglia Love this channel, bro. Great info

Milwaukee Kit $449, Dewalt Flexvolt Kit $300, Makita 36V (2x18V) Kit $250

Thank you

Intro cracked me up dude.

14lbs 4oz

Just like I asked!!! Thanks

The hole in the dust port induces a venturi effect. You get the same effect when you leaf-blow by backing over leaves, and they get ejected.

Great stuff. Loving this tool. TTR TIME!!

I got one from HD online and it's awesome lots of power

Bad ass saw Vince! Just cut anything with it! Get to ripping! I want to see more!

TTR it! If you can use some maple and oak and all saws with the same finish blades that would be cool.

Gotta tell you....You might have sold me on the rear handle. Never thought I would have said that.

Great video Vince you look like you’re ready for a bowling match ha ha ha ha ha ha ha ha😂😂😂

YKK, not KKY. You're right, blade on the left is the only way to go. I don't know why you'd want it on the right.

Amazing tool. The best

I think it's pretty darn sick man. Sexy looking tool...not to be weird. Love it man. Wish it was in my price point and I'm on the Mikita platform. You are solely the one who makes me want to switch completely.

Vince, I’d like to see the following tested if possible: Dimensional lumber OSB 1/2 & 3/4 plywood 3/4 Baltic Birch plywood, taped cut line (prevent splintering/tear out) I’ve been thinking this is the circ saw to pick up, glad I waited!

Looking good brother!! Great vid!!

Sweet thanks.

I like this saw but I'll stick with the 6.5" for now as if i need to cut anything bigger I tend to use the 305mm mitre or table saw.

Ive been watching for serval weeks now. Got used to the beard. Never shave!! Great video!!

Do a video of your tool set up in your truck ,and your tools you use.

Look at that baby face 2 years ago... I love my 2830-20 saw. It works awesome. I hate the damn cord getting in the way on my old circular saw. How many of you guys have a taped cord on your circular saw? I always wondered why my dads had electrical tape on the cord. This saw is a damn good tool. No cord to get in the way!!!!!! I started out with the 5 XD battery. It is lighter than the 6 amp hour and 8 amp hour batteries. With the 5 XD battery, it last a long time in this saw. You don't need the 12 amp hour battery for use in this saw. It's a heavy beast!!!! Saw with blade weighs 10.4 pounds and 12 amp hour batter weighs 3.3 pounds. That is 13.7 pounds total. I like running mine with the 5XD and single hand on ply wood, peg board, 2x4's, 2x6's etc... This saw cuts straight effortlessly and the light works great. Milwaukee hit it out of the park with this one..

i wish milwaukee would sell those contractor bags separatley...the one that comes with the M12 tools in the kit...i could use some of them for the milwaukee bare tools i buy

I own it. I like it. Nuff said

when you got the skills you need a saw that has the skills also you need a skill saw and that what you got brother skills

Test: Ripping wet pressure treated 2x4x12ft at 45°

Liked the vid, & honest thoughts....about dust collection. When saw NPS, was thinking same thing. Congrats on the saw & looking forward to the test results afterwards! Wish able to buy, but not in the cards just yet; still rocking my corded Skil circ saw, which is great. Thanks for the vid✌🏼

Thanking about getting it haven't made up my mind already have Milwaukee 7 1/4 18 V