New Stump Grinder! Low Cost! Let's Try It! 

Grew up playing on an old 720 (non-working) parked under a tree on family farm. Great time with good memories.

Nice. Enjoyed the ending. My dad had his John Deere “60” restored years ago. He drives it through the parade every year.

That was an impressive tool and video. It was nice to see the other John Deere tractors too. I would imagine you have helped a lot of people pick out the proper attachments they “need”.

When I first started watching the video I was like there’s no way that grind is going to do a good job on that small tractor but I got to say I was very surprised. Looks like it worked really well. I rented a 35hp Vermeer grinder a few years ago. One of the ones you stand next to. But man that thing was a handful to control if you cut down too much she would dig in and pull the whole machine forward. Love the old John Deere at the end nothing like the sound of a Johnny popper.

Seems like a handy attachment. My dad has an old john deere like that. We used it on the farm when I was a young kid

IT's hypnotic watching it work...it is amazing how tools have progressed. Thanks for sharing.

if you ever turn wood on a lathe you'd find that hardwood is much easier to shave than softwood. Softwood just comes out in noisy chunks; hardwood peels off. Try turning a piece of pine on a lathe........nightmare! You could also try carving maple vs. pine and see which one works better. The pine just chips apart because of the softness and big airy grain structure. My 2 cents. cheers.

I love those 2cyl John Deere’s We used to use A 720 with A single bottom plow in people’s backyard vegetable gardens where there wasn’t room for the bigger tractor

We've got a Shaver MV50 for the 5320, which I had at my house for a couple weeks a year and a half ago. Traded my neighbor him using his bucket truck to take down my pine tree (can't drop it any direction in one piece) for taking out 6 Ash stumps in his yard. They were all 2-3.5ft diameter. Even with that setup, it took a whole day to grind them all up. The dead Ash was suuuuuper hard! So much repositioning on those big ones!

Good morning Tim, Thanks again for making these videos. Your first video on the first version was the reason I bought my stump grinder. I went with the woodland Mills Version. I've only gotten to use it once so far but was super impressed. Its reassuring to see someone use it on a similar tractor (I have a yanmar 424). I was alittle worried about the size of the machine. Again thanks for the great tips and advice. Keep up the great work.

That 720 is one of the coolest things you're ever had on your channel. Thanks for showing that!

Nice work with that new grinder, Ya'll. If ya had to use that thing on a daily basis, ya would end up shaking the tractor apart with all that "bouning"! I sure could've used something like that with my 1025R "Johnny"🚜, but I was able to dig out several tree stumps with the H120 backhoe. Thankyou Mr. Tim . . . . .as you to were also an inspiration in purchasing my FILB 1025R back in summer of 2017. My tractor has been a Godsend for sure. No matter what i do with my lil Johnny, i call it "TRACTOR THEROPY"! We did a full pyhsical restoration on our J.D.720 a few years ago & got it complete about a year before my dad was diagnosed with gleoblastoma brain cancer. He did get the opportunity to drive the tractor up & down the road to his cousin's house for visits, who was also in bad health. Both these fine, oustanding, men passed away & went home to be with the Good Lord in 2017. . . . .My dad in January & his cousin Chet in March. These 2 men were more like very close brothers during their lifetime with each other than they were cousins. Thankya'll again for this video. i really enjoyed it. Great job in the stumps. Take care.

Another great instructional/informative/relaxing video. Makes me want to get outside and get to work. Thank you

Can't WAIT to finish the restoration of grand dad's OLD 720 loved hearing that one

That worked better then I expected may have to look into getting one thanks for the video

Yeah your customer is right, I am one of those guys you have helped out. You deserve all the wealth, health, and prosperity you have put in the time and entrepreneurs are always tired but we keep moving forward AVANTI!

Tim, my neighbor has a 2025 r with backhoe and I'm lending him my old Howard rotovator if he wants to purchase. That 2025 handled that tiller better than I thought.

For the price they work pretty good. Price out even a small commercial unit and they are way up there! I bought the woodland mills version, looks to be very comparable to this unit. Works awesome of softer trees like pine. I've done harder trees, and even a few black locust's. Those take a while. I'd recommend having a hydrostatic tractor for this to get the best use of it.

That grinder did a good job. I'm very impressed. Have a Great Day ,GOD Bless

Nice old JD 720 at the end! But, I was looking at the barn framing too. I need to restore my old hand-hewn post and beam barn soon. I hope to post a video of that.

Love the sound of an old popping JOHN

Thanks again for a great video. Interesting to see you use the same cutting techniques as machinest use on metal...they avoid "climb cutting" unless it is for a very fine cut to produce a finish...and their mounting is much more fixed. The slip clutch looks like the same kindve had on our mowing machine...adjust it now and then and no troubles. Replaced the clutches now and then...no problem. The Bible verse was absolutely perfect. These seem to be those kinds of times...ecclesiastical...time to for all seasons...when we figure out what season this one is, we can move forward in faith.

Great product Tim. Thanks for the video. Stay well.

Great job Tim and Cristy!!! Love spring time. Can't wait for the spring to start though lol.

Keep healthy Tim and family, enjoy the videos

One of the most satisfying sounds on Earth. Love the old 2 cylinder Johnny! Or is it Grand Johnnys

Almost like Classic Tractor Fever! A channel I watch! Love old tractors!! I grew up with old tractors!

I would love to see the other grinder I have a gear Tracter so this type won’t do me any good still love to watch y’all’s videos

Good demonstration Tim👍

God bless you, Tim! I would be lost in tractor world without you.

I have one of those Power Brooms from Shindaiwa, gas powered from 1998 I believe. Much easier to use if you flip the unit over and pull towards you, even though it'll fill your boots with everything ! Thumbs up !!!

What a cool video, especially the 720 at the end. Thanks Tim👍

Now that you have ground them down, pile up the chips and light a fire to them. They will burn down a lot further so as not to rot and keep sinking. Great new product Tim. Nice tines on Jason's grapple!

Enjoy the video...thanks for the work you folks do to entertain us 👍

Another great implement allowing these little tractors to get things done. In my situation it is hard to offset the cost for a few stumps but at least I know that I do have options. Thanks for the video and bringing some sanity to our quarantine.

It almost looks like a blower attachment would be nice. That way you can actually see what you are doing.

Would definitely like to see a 3P24 on the 2038R and an explanation of why it works on that tractor but not on the 1025R - I think I get it but that sounds like a big deal in deciding between the 2 as I'm trying to do. I like the idea of being able to swing the grinder side to side & wasn't aware that was an option except on something like Vinny. Will keep an eye out for that video hopefully.

I just purchased a very similar grinder from a different vendor.... works great. I have 300 stumps to remove on my lot.... Maybe 280 to go.

i bought the 1p24 stump grinder from green dealer because of tim and his wife. i wish i could really get across to them how much i appreciate their hard work in putting out videos and helping people like me get a better deal on an implement. i also really appreciate the bible verses at the end. it blesses my heart. i pray that the good that you sow will reap ten fold.

I have a bamalight on my 1025R as well. Most of what I’ve used mine on is hedge stumps and it works great. I wish I had that clutch system on mine.

Moore on that 720 JD. Lift the hood, show the engines, pull something whit it. After all you are the Tractor Time channel😉.

Been wanting to get a grinder, and a few bucks later it is being shipped. Will have a real test of it with a 6'+ diameter oak stump once it's not a mud hole outside! Thanks for getting these accessible online Tim.

Thanks guys for sharing.

Great channel Tim you’re awesome and so is you’re family. Really good content and amazing camera shots!!!!

Pretty cool power sweep with the huge battery. Jason kicked butt on his stump. I'll be looking into this for my kubota compact.

Power sweeps r great for rocks in grass after winter plowing

Pine is stringy and likes to lay over when grinding, the first pass will fray it then it is tough to cut especially if the teeth have any wear on them. The hadwoods chip nice and go faster and easier. Does the shroud on the wheel lift up or shift from side to side. I ask because the mud can really pack in those areas and be like concreat to get out.

Great video , I loved the JD720, Thanks Tim

Love the sound of the 720

Looks like a good stump grinder for the price. And that old 720 sure sounded good!

Loved seein that 730 and we got to hear it runnin!

This makes a ton more sense to me than digging one up with a large excavator. Maybe not quicker, but much better for the surrounding area and way cheaper!

Beautiful sounds from the 720!!!!!!!!

the big toys start at the other side of the stump. Nice shots Christy 👍

Tim great with a cab it would be harder but sill would beat doing it by hand God Bless PaK

Love to see one of the bigger ones!

nice job, like this video, always have great videos

Aw man...and after I bought a non-quick hitch compatable one last year for my 1025. Actually, the first thing I did was make a easy rolling cart for the Stump Blaster out of a 2x4, plywood and 4 heavy duty casters. Makes hookup almost as easy as a quick hitch. Gotta go...more stumps to grind!

do not see many them 720 with a wide front like that super cool find

When i was a youngster 60+ years ago before the country got crazy my dad would blow stumps with Dynamite he used His 730 John Deete Diesel to pull the stumps to the Burn pile

Please let me lend some advice. That Stihl powersweep works great for alot of things. Used like this, is not one of them. A pitchfork would've won the match. For cleanup and sweeping it back up of the turf, it's fine. For removing gravel out of grass, like from plowing, there's nothing better for cleaning ditches and stuff. Now, for the advice. Loosen the attachment end up and rotate it 180 degrees so it runs backward. Now you are pulling it. When you pull it, you're now able to stand up straight, you're not wearing yourself out pushing and lifting it, and it pulls with essential the resistance of a leaf rake. You only need to run these about 1/4 to 1/3 throttle (on the gas models). These things are worth their weight in good when used like this. 😉

must been a great day for you Tim! :) seems to be a lot of fun driving this 720.;)

I love that little backpack thing!!

I'd like to see the 3p24. I've got a bigger tractor with multiple remots, so it'd be an easy fit for me.

Hey guys. I’m sure you must have considered this; but what about installing inexpensive cameras (front and back) and a screen by your seat. I have a terrible back with two major surgeries under my belt now, and I can only twist and look behind me with with difficulty and limited movement. I realize that you have to with some implements as part of it, i.e. this stump grinder ( which I’m probably going to buy thanks to our tornadoes this year. Yep. Tornadoes on Cape Cod, MA! LOT of stumps left.) Pretty sure that’s what I’m going to do to help out. Anyway, thanks for your videos; they have been a true joy. God bless.

Question. For a 1025r with an iMatch quick hitch did you have to shorten the driveshaft of the BaumaLight 1P24 Stump Grinder?

I purchased a Woodland Mills stump grinder for my 1025R 2 years ago. Does a very good job and is quite similar to the Baumalite in function and operation.

This one seems to grind smoother than the woodland mills from the videos I've seen.

That's a great attachment, if you have a lot of tree's...And if you can trailer your tractor around you would only have to grind 50 stumps to break even at $50 a stump. Tim , how many stumps do they rate those cutters for?

Good morning Tractor time with Tim

I myself would love to see the 3p 24 operated

Any chance to see that larger model? My Kubota has 3 rear remotes.

I have a 2038R and I’m trying to decide between this stump grinder and the 3g24 version

Looks and functions just like my Woodland Mills grinder.

It looks like you found the sweet spot on that stump grinder. They are designed to only take so big of a bite at a time. If you watched close you can see where it goes through a stone, or gravel trapped in the roots. If that sweeper gets too heavy you can add wheels to it. I put wheels on mine.

Love the old Deere we had a old tractor that had a pony moter on it an a old bulldozer that was the same way hard to start but would work all day and never stop 🚜🚜🚜🇺🇸🇺🇸🇺🇸🇺🇸

@1:16 love your reference to Tool Time haha

You guys show some great equipment

I know you don't have many rocks over that way but any word on how that would handle hitting a rock beside a stump? In western Pennsylvania almost every tree has pushed a rock or 2 up along side it's stump. I would really like one but I feel like the cutter teeth wouldn't last /handle hits like that.

I would like to see one of the bigger ones work. Would it be able to go on your 5 series?

The Sthil broom looked like it worked well. Great video Tim!

i would like to see the larger stump grinder in action

That 2 cylinder brings back sounds of my childhood, hearing the farmer next door mowing his 50 acres. Unmistakable. 👍

Glad to see where I can buy the stump grinder. Last year went to a local dealer did not know they were a baumalite dealer but baumalite web site said they were took a day to call me back was given price over 4000 dollars

I have a gear shift Mahindra 35 , If your a good driver on flat ground it works as advertised , it can do commercial work ! You won’t be disappointed

Nice job. Very nice tool. Somewhat affordable.

I've found if you have another person with a backpack blower moving the chips away as you grind...its a bit more efficient😀😀

seeing that jd 720 pony motor reminded me of the old pony motors i had run on some dozers yrs ago.

A much better chipper in the fact it goes thru the stump rather than chipping from the edge and go through the entire stump. Much better concept.

That's a nice chipper. It went through those stumps easily.

That’s a good John Deere tim plus we have owned one before our 1958 ford 601 workmaster 640 gas I4 farm tractor

Dude, I envy you the 720. Stuff like that is what I learned on. Spent many hours on an international 1260.

Tim sales tax is like a bug to a tree, it kills it. I am liking this video, didn't know there was one for a compact tractor, and would be great for tight areas that a big commercial one couldn't get in.

I have a woodland mills WG24 stump grinder on a 2032r which is the same pull behind with no extra hydraulics needed. Love the thing. Over the course of a weekend we easily went through over 200 Pine stumps

Hi Tim, Awesome review of the stump grinder. Christy get a A+ for her video work! Looks like a nice unit. I'm curious about how the teeth are to sharpen. Did you get a chance to see how dull they got after these six stumps? The Stihl power broom looks like a neat tool. First time I ever saw it moving heavy dirt and chips.

I wonder if these will fit on a deere 420 garden tractor with hydraulics

Hi Tim and Christy nice video but i do like that power sweeper and the stump grinder get the work done you cant ask for more than that

I’m going to get a stump grinder for my 4052R. I have a lot of stumps to grind and am concerned about not only visibility from the cab, but also having to turn around all the time. I was hoping you would test out a camera with monitor to see how that would work. Enjoyed the video and of course the Johnny Popper at the end....gotta love that. Blessings to you folks!

OOOOOOOHHHHHHH, that is some I have to go around the financial committee to GET. Companies are definitely tapping into the utility tractors sector.

Bent tines on the grapple, check out Everything Attachment Wicked Grapple, mine has been bullet proof. Very heavy made and reinforced.