Buy me a coffee ? www.buymeacoffee.com/MRJinspire
(If you feel you should help the channel to do more videos, just contribute as you can, that will help to maintain genuine quality of all content of the channel without adding harmful brand collaborations) New two tires replacement, where to go front or rear ? MRJ safety Tips, This video help you to understand oversteer and understeer in hydroplane situation in a wet road. මෙය front wheel, all wheel drive or rear wheel drive සියල්ලටම අදාල වේ..
"Every tire will hydroplane if you go fast enough - even a brand-new tire will. You just don't ever want the rear tires to hydroplane before the front tires do."
recommend installing four new tires at a time for better handling, comfort and performance. If you prefer to replace tires in pairs, and if they are the same size as the tires already on your vehicle, we recommend you install both new tires on the rear axle.
Installing Tires on the Rear Axle
When tires are replaced in pairs, the new tires should always be installed on the rear axle, and the partially worn tires should be moved to the front. Driving with new tires on the rear axle can help the vehicle to maintain control on wet roads because the tires with deeper treads are more likely to resist hydroplaning.
When front tires have less tread than the tires on the rear axle, the vehicle is generally considered easier to control, since sliding would likely be the result of an understeer -which is easier for the driver to control by decreasing throttle. If worn tires are placed on the rear axle and a slide occurs, it’s likely the result of an oversteer (where the rear of the vehicle continues to move straight ahead). Oversteering is generally harder to recover from and decreasing throttle may actually amplify the negative effects of the oversteer.
Where Should One New Tire be Placed?
Replacing a single tire on a vehicle can have an adverse effect on suspension, gear ratios, transmission, and tire treadwear. However, if replacing only one tire is unavoidable, the tires should be rotated so that the new tire is paired with the tire having the most tread depth of the other three and placed on the rear axle.
Mixing Different Tire Types
Unless recommended by your vehicle manufacturer, or if differing sizes came supplied as original equipment on your vehicle; tires of different size designations, constructions, and stages of wear may affect vehicle handling and stability. For best all-around performance, we recommend that all tires be of the same size, construction (radial, non-radial) and speed rating. If tires of different speed ratings are mounted on a vehicle, the same size, type and speed ratings need to be placed on the same axle. For assistance, find a store near you.
Using Radial Tires and Bias Tires
When radial tires are used with bias or bias belted tires on the same car, the radial tires must always be placed on the rear axle. Never mix radial and bias-ply tires on the same axle.
Replacing AWD Tires
If you are looking to replace all-wheel drive tires, we recommend replacing all four at once. While it may be tempting to replace only two at a time, mixing new and worn tires can create a size difference from front to back, which can lead to damage to your vehicle.
Facebook : / mrjinspire
Instagram : / mrj_inspire
email : mrjinspire at gmail dot com
#MRJ #Cars
Brand collaboration accepted without harming viewing experience of my audience
contact me in fb or send me an email.
Further you may support to the channel to do more valuble videos in future as well.
Disclaimer:
persons using this channel are doing so voluntarily and that any actions they take are their own responsibility and Channel has no any responsibility You can donate to the channel to bring more valuable videos. (I am doing this as a hobby and your donation will support making more valuable videos in the future)
Use this link to donate :
www.paypal.com/donate/?hosted... or use this Patreon Link
/ mrjinspire Visit
www.mrjspace.com
#mrjspace
10 сен 2021
