Thanks for the video! I have the same model (American SP64) and have been having issues with both directions on the drive. I noticed that messing with the wires (moving them around etc) at the joystick board changes what works and what doesn't. Do I just need to remove every wire, clean the contacts and reinstall?
Hi Joshua, I would recommend to inspect contacts and wires a bit more carefully. You may need to re-crimp some wire ends or you may find that issues is actually with a plugs them self look for signs of corrosion. But a fact that moving wire makes difference leads to poor connection 100%.
in one direction, after releasing the joystick, the machine is still moving, the brake does not apply until two seconds later. where to look for the problem?
