For those looking to understand the process 0:27 remove torx screws on battery cover 1:20 look at connector between battery and controller 1:33 plug in charger still shows green = no charge 1:51 based on no charge, the issue is between controller and battery charge wire (tries wiggling to see if he can get a connection to make it turn red 2:10 holding down the wire to the controller makes it charge, so there's an issue in the connection between the connector and controller 2:49 test for continuity between charge port and other side (see which wire has a bad connection) 3:23 by sticking a pin and wiggling, looking to truly verify the wire with bad connection (probably cuts the video to do some soldering here?) 4:11 plug in battery to controller connector 4:45 charging is working consistently everything after this is just validating and reassembling the scooter
Thanks for the video Superman! It'd be great to have your voice in it describing what you're doing, though :D Still appreciate the video as I'm hoping the issue with mine is similar!
@@supermandcuteheart55 wire wiggling didn't do anything, health of battery should be okay. Maybe error in PCB. Sometimes (1/20 chance) it charges for maximum 2 minutes with increasing % battery and then all of the sudden stops charging after only 1-2% has been added.
Sir NAPANOOD KO VODEO MO. ganyan din problema ng g30LP KO. KAKABILI KO PALANG NUNG DECEMBER 24 2021, ngayong 29, ayaw na mag charge , stay green nlng ung charger. Sir ano # mo. Gusto sana kita makausap mkapag tanong ako ng konti about s G30LP.
Sir pwede ko ba makuha # mo, ask lang ako konti about sa G30LP. NEW SUBSCRIBER MO KO, AND NEW USER DIN NG NINEBOT. NA SHARE KO NARIN SA GROUP NG NINEBOT SEGWAT UNG VIDEO MO. DUBAI AKO. THANKS SA VIDEO$$$
The problem with Sagui they have a wonderful machine, but the garbage customer service I will not buy them never anymore. They probably have a recall on this machine.
