Hey everyone! Because you maybe had noticed that the reach of the front brake lever is quite soft out of the box from your NINEBOT MAX, we want to show you how to adjust it to get a better brake bite. Enjoy and beware!
Thanks for this video! I just got a Max and I was trying to figure out whether or not the tiny nut was separate from the larger one; I see that it was. After that adjusting the front brake was a breeze.
Nice video but when I followed your instructions the brakes where great but the problem is the brake lever needs enough travel to activate the brake light switch.
You shouldn’t put all break force on the front. More wear and more dangerous. Don’t adjust to the max and pull back.. adjust just enough so that you use both front and back (motor) brakes
my lower screw has a cap on top of it and it doesn't allow me to screw it all the way up or down. Max G30D2 built in late '21. How can I adjust it with a non removable screw that has a cap and can also not be twisted all the way to the upper nut?
If this happened after adjusting the mechanical brakes then the pads are probably rubbing. Good chance you need to loosen them up a little. You will also notice it is a little more difficult to get to top speed when the brakes are rubbing.
Hi that is exactly my front break looks like. I want to install a monorim suspension on the front but I'm having difficulty removing the break cable because I can't unscrew that big screw at the bottom. Please help. What should I do? Thank you
Hi, does the shoe of the drum brake make a "scraping noise" when touching ? Because when testing my brand-new Ninebot G30, I've noticed there is a scraping noise while braking just before fully stopped. However, the scraping noise doesn't occur while driving. Would you say I should tighten or loosen the brake wire as shown in your video ? Or might it be a problem with the brake shoe itself ? A video (ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bTjJR8KEsQU.html) found on RU-vid which shows the problem I have with the only difference that it happens only when braking for me. Thank you for your video.
@@MyMobelity I did but it didn't help, nor tightening it. It was actually possible for me to replace the G30 by a new one in the end. The new one works just fine and without the noise you can hear in the video. My guess is that it was probably a problem with uneven drum pads which were scraping against the brake drum. Just my 2 cts. Thank you for your answer nonetheless 🙂
Just subscribed!! Any videos on changing the tire would be sweet . Just tightened the brake , worked perfectly. Nice video!. Oh yea hey dude why would you take it to a shop for them to do a 30 second adjustment of the cable and charge you 50 bucks 😂
Thank you! I installed a suspension showing on my ninebot max. Corley figure how to change the brake cable to the new fork. I went to 4 different bike shops and those a-holes workshops even look at it, just because it was a scooter! Ileft them all bad reviews on yelp for not trying! Thanks to you, I did it myself, and it works great!!
That's more or less normal ^^ When a bike come to our workshop, we don't treat it neither. We are not equipped, trained neither we have time to do it. You don't go to Mercedes when your mower has a failure, right? :)
Ehhhh... I mean.... >scooter >bike shop ....here's your problem. There are shops that are specifically equipped to deal with different kind of electric scooters and ebikes, eboards, etc
@@DTOSX666 yea .. ok .. they have them for sale in their floor, and they can't fix a wheel and a brake line THAT IS EXACTLY LIKE THE WHEEL ON A BIKE???? Talking like you know when you don't know! Bye!!
