Nintendo Switch Screen Replacement - LCD & Digitizer Replacement - Complete Tutorial!

Подписаться 10 тыс.

Просмотров 37 тыс.

50% 1

Is your Nintendo Switch touch screen not working like it should? This particular one was shut in a recliner and caused damage to the touch panel.
Today we dive into what it takes to replace the touch screen on a Nintendo Switch!
Thanks for watching!
Don’t forget to LIKE, SUBSCRIBE and turn on NOTIFICATIONS!
Tools and parts I used in this video
iFixit Pro Tech Toolkit
amzn.to/3dmo89R
XOOL 80 Piece Tool Set
amzn.to/3hPJcsw
MakerHawk USB Ammeter
amzn.to/3fD6cZY
Other Awesome Tools:
Hot Plate : www.injuredgadgets.com/back-c...
Back Glass: www.injuredgadgets.com/catalo...
Work Mat: www.injuredgadgets.com/blue-r...
E8000: www.injuredgadgets.com/e800-m...
Screwdrivers: www.injuredgadgets.com/catalo...
Tool Kit: www.injuredgadgets.com/ig-too...
Pry Tool: www.injuredgadgets.com/nylon-...
Outro Music:
[XimerTracks]
• / ximertracks
• / ximer_tracks
• / ximertracks
[Perplex]
• / perplexproductions
• / purplexxer
• / purplexxer
Download "Lotus":audiograb.com/UoECHTh0
Come hang out with us!
Instagram: / profixerr
Facebook: / profixerr
Website: profixerr.com/
Follow Injured Gadgets cause they’re cool too!
RU-vid: / injuredgadgets
Instagram: / injuredgadgets.us
Facebook: / injuredgadgets
Website: www.injuredgadgets.com/

Хобби

Опубликовано:

29 июл 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 53

@kikomori 3 года назад

So I just did this with no experience whatsoever and it worked perfectly! Can't recommend this tutorial enough. I used a hair dryer to heat the screen up a bit, it works fine if you don't have a heat mat/gun. Also, if the touch screen feature doesn't work right away, it's because your game reader isn't connected properly, I had to open my switch up twice again until I noticed that was the problem lol.

@beelbrother1648 2 года назад

could you elaborate on that bit about the card reader? how could that affect the screen?

@keihrahalcomb6591 10 месяцев назад

I need to replace the screen because it’s got deep scratches in the plastic, but I’m terrified to do it myself, but I am way too broke to go to someone to have them fix it.

@keihrahalcomb6591 10 месяцев назад

@@beelbrother1648 that’s because the card reader, headphone, jack and touchscreen all share the same board. So that green chip that’s attached to the card, reader and the headphone jack also controls the touchscreen

@jillyjils91 2 года назад

Just have to give a big thank you for walking the whole way through. I fixed my kids’ switch screen and they’re ecstatic to be able to play it handheld again. Thank You!!

@gottagotojoes 4 года назад

The best tutorial imo

@itsAphelion. Год назад

Great video, followed it and got my lcd changed!

@gildardorodriguez4356 4 года назад

Great! Very informative.

@KBoatsw 3 года назад

Great tutorial

@MrJeeper989 3 года назад

Were did you get the work mat? looks very handy.

@paulgray5771 3 года назад

Thank you for this, your instructions worked perfectly

@nacionnyc 2 года назад

How can I find the adhesive tape on eBay? I'm having a hard time finding it. Thank you

@chrisdglong 3 года назад

What do you think the cause of the digitizer lifting slightly on the right side is? This seems like a common issue. Is it just because the adhesive is warming up and not holding it in place as well?

@mariaarredondo5546 3 года назад

I like those little scissors looking thing ,what is it called ?

@runnut5 2 года назад

What width tesa tape did you use?

@mischaafn 2 месяца назад

How is this ,,spray" called which you sprayed between the lcd and the digitizer

@lulufolds Год назад

Was trying to change the digitizer, pulled too hard and messed up the lcd on the corner.... dam lol thanks for the vid, ordered new lcd from ifixit

@claudioaverna 2 года назад

I tried with the same double face tape Tesa brand and my screen started to opened and cant figure out if thres anything better to glue back the screen of my switch, if someone knows a better way to do so please let me know thanks!

@Dizzyyo 3 года назад

23:13 - Thinking ‘oh crap it’s not working’ 😂 Great video, thanks!

@profixerr6275 3 года назад

😂😂this is true actually. Digitizer had a dead spot and had to be swapped

@etdenever4944 3 месяца назад

Regular heating pad on high for 5-10 minutes worked to loosed up the adhesive for me !! Glad I didn’t have to try the blow dryer lmaoo

@tylermason8207 3 года назад

Could I damage the console if I dont use a heat mat?

@kiriyamakazou 3 года назад

17:05 See the usb c port? Above it and towards the left and right corners of the switch front are the speaker holes. He just taped over them with those adhesive strips...

@profixerr6275 3 года назад

Yes, this is true actually haha. I realized that after install and corrected it

@lucidkid2690 3 года назад

will you fix mine for me? ive tried three times and ruined the lcd ribbon cable connetion each time. let me know if i can send it to you and pay you what you would like for the repair. please advise, thank you.

@brandonwalters4663 Год назад

Where do you get that tape?

@phillipzan2005 2 года назад

Out of curiosity how come you don't use rubber gloves when handling the screen? I have found on screens it eliminates a lot of hand oil issues.

@MaddieVonMonroe 10 месяцев назад

How can you find the right screen and digitizer replacement to buy?

@leoleonardowilliam5957 5 месяцев назад

Is there an easier way for just an annoying triangular scratch?

@HazySkies Год назад

The second for the game card reader was very unclear. I ended up stripping some of the black material on the actual cable trying to lift it, only to realize there's an even smaller tab above it. I just hope that I didn't ruin the reader because of this...

@justatank4877 3 года назад

Great video. Only thing that bothered me was not replacing the thermal compound on the heat sink being that was removed. Maybe not as important as a PC CPU i guess. Other than that, thanks to this tutorial it should be a snap.

@znyan1077 3 года назад

really hoping there's a glass digitizer available to do this with 😭😭😭

@kimberlygamez7132 3 года назад

I’m getting ready to change my lcd and digitizer, but some people say certain digitizer isn’t compatible with the HAC-001(-01) models, which I have. Does anyone know if the linked items are compatible?

@rengstrom 3 года назад

Did you ever get to replacing the digitizer? I'm having trouble finding a compatible one.

@kimberlygamez7132 3 года назад

@@rengstrom I ended up only replacing the LCD, but I did see some digitizers on amazing that were said to be compatible. My lcd was fine but you may have to take a gamble on the digitizer and return it if it doesn’t work

@rengstrom 3 года назад

@@kimberlygamez7132 I see, glad it worked out for you. I found a seller with the newer version of the digitizer so I'll give it a try, thanks. :)

@ramontaz2100 3 года назад

Would you put a new digitizer on my switch ?

@linkmasters535 Год назад

Yes I bought my switch used from game x change and it was having issues and the digitizer was all scratched up so I sent it to Nintendo to get fixed but I noticed that the digitizer at the bottom right corner right by the home button started to left up and the right joycon would disconnect when in hand held mode and I had to push the button on the back of the joy con lift up and then push down to make it work again

@linkmasters535 Год назад

Would this be better to replace the adhesive tape and would make my own stay down instead of it lifting up

@Joseluis-tf4in Год назад

What size are the two tapes you use? you don't comment thanks

@Poopy_Tissue 3 года назад

Is there a professional that I can go to to do it for me

@cdomz3 2 года назад

What width of adhesive tape did you use?

@debbiealcimasrules9418 Год назад

36 yard roll 4mm tesa tape with glue card from amazon

@pierresotomayor9633 3 года назад

How do you center the lcd?

@profixerr6275 3 года назад

It self centers by sitting in the recessed portion of the housing

@GriotDNB 3 года назад

I would love a real glass digitizer.

@lulufolds Год назад

Don't u have to put thermal paste on the back plate????

@profixerr6275 Год назад

On the switch, as long as you have the original still there it will be fine!

@orbita1 2 года назад

How come you didn't need to align the lcd and digitizer?

@profixerr6275 2 года назад

It aligns itself since it’s inside of the housing

@orbita1 2 года назад

@@profixerr6275 the replacement lcd panel I got doesn't do that annoyingly, the panel itself is a bit smaller than the hole cutout so it has enough play to get quite skewed and off centre