Тёмный

Nirvana F-Light 200 assembly - How to 

Mark Huneycutt
Подписаться 82 тыс.
Просмотров 3 тыс.
50% 1

Enjoy an assembly of this used Nirvana F-Light 200 I just recently picked up.
Welcome to my channel! Please subscribe and stick around for more content!
Where I got my Gin Falcon Paraglider:
superflyinc.com/
SOL Fun Wings found at the link below. Don't forget to use the coupon code Huneycutt for $25 off!
www.wisconsinf...
Micro Avionics Headsets and ICARO Helmets - www.wisconsinf...
Use the coupon code Huneycutt when ordering for $25 off any headset/helmet combo!
My Favorite Throttle from Off Grid Aviation!
www.off-grid-a...
Consider donating to Resurgence PPG in order to get disabled veterans flying! Link below:
www.resurgence...
Gear I Use:
Helmet - www.wisconsinf...
^use the code Huneycutt when ordering for $25 off any headset/helmet combo
Ground Camera - amzn.to/2LCn1bx
Ground Camera Mic - amzn.to/3Nnil6I
Ground Camera Mic wind cover - amzn.to/3GOuGyl
Helmet Camera(Gopro 9) - amzn.to/3Mp82O6
Gopro 9 Media Mod - amzn.to/3O021J7
Gopro Mic Adapter - amzn.to/307GE3N
360 Camera - amzn.to/306B41V

Опубликовано:

 

6 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 54   
@MarkHuneycutt
@MarkHuneycutt 6 месяцев назад
I didn't really want to put my reasons in the video for why I chose the Dudek harness over the Nirvana harness but here's why. Nirvana Harness: There's no safety strap from the carabiner to the harness (you can buy one for $44 from SkySportsUSA). It has an underseat reserve which I don't like - I don't want my reserve, albeit outer container, touching the dirt, or absorbing wet grass's moisture which could soak through (Scout also does this. It's just not my thing. Personal preference). I don't like that the reserve bridle routing stops at the side pocket AND has no attachment points for the reserve bridle built into the shoulder strap. This means the intent is for the reserve bridle to only connect to the carabiners, so in a rare single carabiner failure, you're coming down under the reserve sideways connected only to one carabiner. It also means you need to hook your bridle up across your lap each flight(link at the bottom for some $108 bridle they use) - I like less steps. Dudek Harness: It's common and people like it. It has an underseat pocket for extra storage. It has a safety strap from the carabiner to the harness. It has a side mounted reserve with bridle routing to the shoulder straps so now you have redundant safety. I didn't weigh the harnesses so I can't compare - maybe I will sometime but they don't seem much different. The pros outweigh the cons when it comes to Dudek vs Nirvana harness in my opinion. www.paramotors-shop.com/v-strut-rescue-chute-lower-connection-for-lhp-harness-instinctf-light--new-type-dyneema
@chrisbajema8002
@chrisbajema8002 2 месяца назад
Now that’s a far difference from the old Rodeo 125 sp I’m still rockin with the high hang points! What a pretty unit. Nirvana really does pay attention to every detail.
@Mrremusakajack
@Mrremusakajack 6 месяцев назад
Great to see again that they still make this upside down engine with problems. Spend a lot of money on my first paramotor. When I tried to take and transport it to the local private airport the engine kept flooding. The spark plug. It would then become a nightmare. Eventually the bendix in the starter failed . And after I tried fixing it without luck since I couldn’t not find parts . Simonini makes great products. Can wait to get a Vitorazzi with pull start .
@FrayAdjacentTX
@FrayAdjacentTX 6 месяцев назад
You must be unique, or you're over-priming. The Simonini engine Nirvana uses is stupid reliable.
@12vibaba
@12vibaba 6 месяцев назад
I have flown this engine for 18 years now. never missed a beat.
@mikepaul6205
@mikepaul6205 6 месяцев назад
Can't wait for the review. I am a Nirvana fan. It's all I have flown which doesn't say much cause I'm a newbie. I can say that I do love my Rodeo.
@Poophead1
@Poophead1 6 месяцев назад
SideXSide with tire chains my friend!! Life saver when our hill turns to ice & Jeep won't make it up!!
@uncletigg1862
@uncletigg1862 6 месяцев назад
Really cool looking, gives me that MacFly vibe with the netting. Look forward to hearing how it flies.
@markallan7654
@markallan7654 6 месяцев назад
Looking forward to you doing the review of this one. I’ve always wondered about it. Nice setup.
@MikeThompsonPPG
@MikeThompsonPPG 6 месяцев назад
I put the same harness on my F-light about 6 months ago. Make sure your right strap going down to the back legs (9:51) does not go over your ON/OFF switch. I had an engine cut off or two in flight when the swing arms come up. I ended up making a cover over the switch that kept the strap away from it. Just a heads up.
@MarkHuneycutt
@MarkHuneycutt 6 месяцев назад
I noticed that, so that's why I have the shoulder harness attached above that, higher as you saw.
@seagreen909
@seagreen909 6 месяцев назад
Love that Nirvana uses reversed numbers on the gas tank so it's easier to see with a mirror.
@DanielJonesParamotor
@DanielJonesParamotor 6 месяцев назад
After all that, you went and bought the Nirvana anyway 😅 inter stead to hear your experiences with it
@MarkHuneycutt
@MarkHuneycutt 6 месяцев назад
Not sure I like it. I don't like that it has thrust at idle (yes I'm within the recommended range). So imagine reverse kiting, you're stepping backwards, but the motor is trying to push you under your wing. Or you're forward launching, and you lean back at idle, and the thrust blows your wing. It's weird.
@nickd5880
@nickd5880 6 месяцев назад
One day you'll be saying. "When i was your age i had to walk up hill both ways 10 miles just to bring a paramotor home."
@Wintermute909
@Wintermute909 6 месяцев назад
And the grand kids'll be saying: "what's a paramotor? Is that like my anti-gravity jet pack?"
@MarkHuneycutt
@MarkHuneycutt 6 месяцев назад
​@@SteveReynoldI'm a 32 year old man Chile. Whatever that is.
@tango_sierra8608
@tango_sierra8608 6 месяцев назад
That throttle is interesting
@MarkHuneycutt
@MarkHuneycutt 6 месяцев назад
Feels nice and ergonomic in hand and leaves the top two fingers easily available for the brake
@MitchG
@MitchG 6 месяцев назад
Im interested in hearing your opinion on the nirvana!
@MarkHuneycutt
@MarkHuneycutt 6 месяцев назад
It has thrust at idle. Super weird
@MitchG
@MitchG 6 месяцев назад
@@MarkHuneycutt my old air conception 130cc was clutchless and had thrust at idle. Especially when I had to turn the idle up to keep it from dieing at idle. It sucks on the ground but it makes your glide at idle much better
@FrayAdjacentTX
@FrayAdjacentTX 6 месяцев назад
You've come to the dark side! FLY NIRVANA!!
@MarkHuneycutt
@MarkHuneycutt 6 месяцев назад
I've flown it twice now. More testing to be done
@jasonsatterley4282
@jasonsatterley4282 3 месяца назад
3months later and it’s falling apart…. Unbelievable
@artoodeetoo3064
@artoodeetoo3064 6 месяцев назад
That Dudek harness really is the best one out there huh. My favorite bar none
@MarkHuneycutt
@MarkHuneycutt 6 месяцев назад
I do like it. Pap's new supair harness modifications are really nice. They added cobra buckles, have an airbag, have a shoulder harness window for your tachometer, and have a phone holder on the other shoulder harness strap. Their backup straps are nicely positioned as well. Might be the most well thought out harness
@artoodeetoo3064
@artoodeetoo3064 6 месяцев назад
@@MarkHuneycutt I've not seen that for sale in any of the Facebook groups. Will keep my eye out. Phone holder and tach setups would be soooo nice
@MarkHuneycutt
@MarkHuneycutt 6 месяцев назад
@artoodeetoo3064 it's specific to buying a pap paramotor. Very nice harness papteam.com/new-paramotor-harnes-slc/
@artoodeetoo3064
@artoodeetoo3064 6 месяцев назад
@@MarkHuneycutt Ahhh I see. Maybe next time when I spend 9k on a future setup
@MarkHuneycutt
@MarkHuneycutt 6 месяцев назад
@@artoodeetoo3064 😆
@stevier3239
@stevier3239 6 месяцев назад
These types of paramotors in a smallish case are pretty cool. If only there was a feasible way to have one compact enough for “paramotor hike & fly”. Think X-Alps but with paramotor😂, for those of us with lesser skills.
@MarkHuneycutt
@MarkHuneycutt 6 месяцев назад
I definitely have thought about this. Something like the Fly Products Eclipse or Skymax Pulsar would be good for this because they're super light with an Atom 80
@HunterKowald
@HunterKowald 6 месяцев назад
I’m going to get one and fly to the moon
@MarkHuneycutt
@MarkHuneycutt 6 месяцев назад
Get outta here with that moon talk
@Wintermute909
@Wintermute909 6 месяцев назад
Ok I've tried step 1: pulling it two thirds of the way up a mountain on a sled.....but it doesnt look like my nirvana is even starting to be assembled! Maybe it's because theres no snow where i live?
@carlcolorado3549
@carlcolorado3549 6 месяцев назад
Fun stuff.
@ripmanridin7092
@ripmanridin7092 6 месяцев назад
Congrats...............
@MarkHuneycutt
@MarkHuneycutt 6 месяцев назад
got it used
@Trike.
@Trike. 6 месяцев назад
That's going to be a rocket compared to your atom 80 , zoom zoom zoom . I wonder what your fuel burn will be per hr?
@MarkHuneycutt
@MarkHuneycutt 6 месяцев назад
My buddy is getting 2L/hr on his with a 20m Viper XC
@tomgillotti
@tomgillotti 6 месяцев назад
I don't know anything about that brand, but I'm assuming you do. There were a few areas where the build quality scared me a bit. Any concerns with this brand?
@MarkHuneycutt
@MarkHuneycutt 6 месяцев назад
Concerns?
@tomgillotti
@tomgillotti 6 месяцев назад
@@MarkHuneycutt yea, are you concerned about the build quality of the paramotor? My assumption is no, otherwise you wouldn’t be flying it.
@davidmack7018
@davidmack7018 6 месяцев назад
Nice paramotor cool weather great mountain sledding what's your elevation there? 78.92lbs to about 60 less fuel mix interested in this one I might be interested in bringing one in from Australia to Papua New Guinea using it for safe commuting over tribal rascals for a time of mission out of gospel light house after doing a school down there
@MarkHuneycutt
@MarkHuneycutt 6 месяцев назад
3400'. Sounds like a cool mission!
@automan1223
@automan1223 6 месяцев назад
Hey champ, are you using the primer/activator that goes with the locktite ? Make sure your locktite is fresh as well. Like any chemical as it ages it goes "flat".
@iKenFlyPPG
@iKenFlyPPG 3 месяца назад
Last I checked thread lockers are anaerobic and don't require an accelerator, unless you are trying to put it into service immediately. Why I like super glue accelerator, and it smells good.
@automan1223
@automan1223 3 месяца назад
@@iKenFlyPPG they are endothermic & either react with the metal or they don't If they don't you best use primer/activator. Locktite actually put out a pretty good instructional video recently.
@iKenFlyPPG
@iKenFlyPPG 3 месяца назад
@@automan1223 If I'm going to update my database I need to confirm the source. The Loctite 243 (blue thread locker) specification says it's an anaerobic cure. I then watched an official Loctite video and they started off saying thread lockers are anaerobic. I've been a mechanic for years, multiple professionally, there ain't no way mechanics are going to put up with a prep circus. I think you may be mistaken here or thinking of another product.
@automan1223
@automan1223 3 месяца назад
@@iKenFlyPPG Yes sir I am aware of the poor level of education among wrench spinners for decades. Not sure what your hang up is about "anaerobic". You should be aware of the active vs passive metals situation, how clean are the threads etc. I would love to do a whole video on this myself and looking at the locktite channel actually has a how to video with a total of 4 views from years ago. 4 whole views. The information is out there if you want to find it. Better yet. Attend the school of hard knocks. When it fails learn why.
@iKenFlyPPG
@iKenFlyPPG 3 месяца назад
@@automan1223 I'm stuck on the product curing instructions, absent of air is anaerobic. I've had good luck using brake clean and air blasting to prep threads for blue locker. I was on a crew of marine construction cowboys who would use red Loctite on hydraulic vibratory tampers and mentioned "uh, this should be degreased' during a pump rebuild, the owner responds "uh, yup" with the expression that said "and". I guess it works, those vibratory tampers are insanely powerful machines used to drive piles into the ground. I personally have applied Loctite to several hundreds of fasteners, been through many bottles of thread locker, I cannot recall moments where a thread locker failed unless were talking glowing red hot manifolds and turbochargers where I found good results with nordlock washers. I recall an email from work about technicians using too much Loctite in test fixtures where it was building up and causing issues with servicing them. I'm with you on doing things right to the detailed level where I have my wheelhouse of knowledge outside of this area. Do you have the title of the video that explains what you're looking at, Id like to get onboard.
@amonchina
@amonchina 6 месяцев назад
First viewer again🎉❤
@MarkHuneycutt
@MarkHuneycutt 6 месяцев назад
😂had to add how I attached the harness
Далее
Flying an 80cc engine to 14,875 feet!
11:53
Просмотров 6 тыс.
DJI NEO Review - 10 Things You NEED To Know
21:55
Просмотров 142 тыс.
Cop Threatens To Put Me In Jail!
14:26
Просмотров 174 тыс.
Stuck in a rainstorm
8:26
Просмотров 6 тыс.
GoPro Hero 13 Black Review: 27 Things You Should Know!
18:31
Camping on a Remote Mountain with our Paramotors
21:24
The Skymax Pulsar's Unique Swing Arm Adjustment
8:27
Просмотров 4,7 тыс.