Nissan Pathfinder 2007 ABS and ESP lights on, error C1103. Fault finding and repair. 

Trouble with most garage they think changing parts will solve the issue, Instead of actually finding the root of the problem, Your the man 👍

I have the same problem on my pathfinder no one could find the problem. I changed sensor but now it makes sense why the light was going on and off for about 3 weeks . Thanks alot man

I am going to do a 2011 Navara tomorrow with a U1000 and intermitted ABS/ESP with powerloss . Happy days .

I enjoy watching you solve the problem. As always, nice job!

Quality detective work as usual 👍🏻 it seems the garages only like the easy stuff

Excellent! Simple procedure, easy find! Just keep the checks basic, and usually you can pinpoint the issue. Gracias Luis!! 😊🤗

Great job Luis. Logic approach and no parts changing 😉 Thanks for sharing!

Nice methodical approach. It's just a wire. 👍

another one bites the dust well done

Hey. Mi troca tiene las luces prendidas también. I’m trying to fixed Thanks for the video

You have just saved me lots of money, you're a good man. 👍

Happened to me tonight...all those lights came on.. Abs would engage if I swerved fast..going to check that wire first... Thanks..

Very helpful and good job on the diagnostic with guided detailed information 👍🏼

Nice find mate 👍... Pita of a place to repair the wire top work 😊👍👍👍

Nice repair video 👍

Nice vedio sir and thanks for everything like knowledge that you are sharing with us

good video , but remember my friend, always always use jack stands ,people get die or get hurt everyday for not using jack stands or safety glasses , 🤨

Thanks another great video much appreciated

Hello, nice repair as allways :) i watch most of your videos, and i want to buy Autel MaxiSys 906BT model for myself, since i work on cars too, should i buy PRO version or 906BT will be enough ? and can you link where from you bought yours, thanks :)

Thank you for another great video!!!

nice finding. thanks for sharing!

Thanks great job!

Liked, subbed and shared on our social media.. Love the vids.

Just like a Volkswagen, a simple ABS sensor fail and the dash becomes Christmas...

nice find basic tools and a fix

Thank you 👍

WoW you're Awesome😎, great attack strategy, you always fix the impossible, very talented & learned Tech👨🏻‍🔧 Thanks for sharing Bro👍

Good video

Great video. I have my vdc and slip light on after doing a wheel alignment, clock spring change and adding power steering fluid. All other fluid levels are ok and the codes were cleared but I still have the lights on. Any ideas?

Can you tell if nissan pathfinder of year 2005 can be readable in full same as 2007? Or it is too old?

I've been seeing a lot more wires failing mid harness or in spots you wouldn't access for testing. I'm thinking that maybe the wire is getting damaged as they make the harness, either scuffing on the spool or maybe getting caught on something that opens the insulation as they make them. With the insulation as thin as it is these days it doesn't take much.

So they took money off the guy and refused to finish doing the job they were paid for...

Thanks mate for sharing 👍

Great thanks for your video

Nice job

You've got an even bigger problem, the steering wheel is on the wrong side!!

Super film. Pozdrawiam

Very nice explain thank you sir. I have a question what is the diffrence between an active and a passive sensor while speed

Nice job...

“Front rear” you say?

Great video 👍

Hi , nice , i have a problem with my Pathfinder, the 4Hi is not engaging, i lookend on the manual and did a self diagnostic on the transfer case and it came up with 3,6,7,17 flashes, which is -Clutch pressure solenoid signal. Proper voltage is not applied to clutch pressure solenoid valve due to open or short circuit (mine is a manual so i don't think i have this on the car) -Vehicle speed signal (from ABS)
Malfunction is detected in vehicle speed signal that is output from ABS actuator and electric unit (control unit) through CAN communication.
Improper signal is input while driving. -CAN communication. Malfunction has been detected from CAN communication line. -ABS operation signal (from ABS). Malfunction is detected in ABS operation signal that is output from ABS actuator and electric unit (control unit) through CAN communication. I don not have any ABS problem , brakes work fine , 4x4 Auto and 4HLo work fine Can you help me with an ideea?

What can be done if it happens that whenever you switch on a Nissan car all dash signs appears and disappears but for VDC and Airbag not seen at all? ? While they should appear and dissapears as others do?

What about the 4wd

how much this scanner and thank you a lot for effort

Excellent work as usual :)

What's the tool called you used to pierce the wires..

What liquid tape brand you are using ?

How much a job like that cost?

Your steering wheel is on the wrong side....

🤝🤝🤝МНЕ НУЖНА ВАША ПОМОЩЬ! Не горит Пиктограмма машины на приборах где копать?🤷‍♂️

👍👍👍

👊👏

Not bad at all for £50

Im from moroco haw match you autrl maxisys