Тёмный
No video :(

Nissan Patrol ZD30 CRD Egr valve failure 

nom_ben_livingthedream
Подписаться 105
Просмотров 252
50% 1

If you have an engine code po401,this could help you out.
Apparently this is a common fault with the EGR System on these ZD30 CRD engines.
We had real issues with the car when it first happened and we thought the worst.
Had the engine gone bang,it was running like it had three cylinder and wouldn’t idle properly or accelerate. It was blowing heaps of smoke also so you could imagine what we were thinking.
Spoke to a mechanic(my brother) who suggested we investigate the Egr valve so video takes us through that.
After removing that flap everything was reassembled and the Egr was blanked off and the vehicle is running perfectly now.
We will be throwing some upgrades to this engine over the next few months but for now it all good.
Thanks for watching.

Опубликовано:

 

4 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 3   
@Gu_Gus
@Gu_Gus Месяц назад
My flap must be down where yours ended up, l never found it. I did pull the manifold off and clean all the black sludge out of it while it was apart. I also did the resister mod on the pink MAF wire.
@nom_ben_livingthedream
@nom_ben_livingthedream Месяц назад
I bet there’s a lot of patrols with it down there. Pink wire mod would help too. Thanks
@adamnorton9701
@adamnorton9701 Месяц назад
Seems like a perfect time to delete it. And put a plate in there
Далее
How to Clean and Replace an EGR Valve P0400
10:57
Просмотров 3 млн
NISSAN PATROL - Guide to the ZD30 3.0 Litre Motor
11:55
Get 10 Mega Boxes OR 60 Starr Drops!!
01:39
Просмотров 12 млн
EGR Delete - The Whole Story
31:05
Просмотров 555 тыс.
8 Symptoms of bad egr valve
5:07
Просмотров 24 тыс.
WILD 200+HP ZD30 Di // RMR injector install and tune
28:55
How to Clean EGR Valve in Your Car (How It Works)
3:26
How to fix EGR Soot Buildup in a Turbo Diesel
7:50
Просмотров 1,4 млн