No bubbles in resin? - No problem! 

Perfect video to show the Airless 😍😍😍 and wow that pressure pot is a Chunky beast i still want one 🤣🤣🤣 fab fab in depth video 😍😍😍

What a fabulous controlled experiment Wendy, you do this so well 💕

awesome to see you applying the scientific method in a very thorough product review wendy

Thank you for letting us hear the noise it made. It made my cat glare at me, then run out of the room 😂. I still might get one.

Ive seen multiple reviews of the Resiners Airless machine, but no one compared that unit to other bubble removing options. Thank you for doing that! That comparison helped me make my final decision to buy the Airless unit. Thanks!

I just love your product trials. You are so very thorough and try to throw as many wrenches in the works as you can to test your product. Thank you so much for taking the time to do this for our benefit!

That's some extensive testing you've done for us! 💜 I don't craft enough to buy either the Airless nor a preassure pot yet but now I know a whole lot more. The "boiling" resin looked so cool! (ha ha!)

Thank you Wendy for showing us your different ways very useful 😊

Thanks for taking the time to try all these methods. Very thorough. 😊

Great informative video Wendy ! Thank you for these comparisons! Pressure pot is the best for sure but very expansive 😒 and big and noisy 😄😄 The airless machine should be the ideal for me 😉 thanks again 💙

The airless pot actually extracts the bubbles and as you said the pressure pot compresses the bubbles. So this made me think outside of my square 😹😹 I have a pressure pot we bought it to spray paint the house, umm but never used 😹😹 plus the compressor, but 👆🏽I have a food saver machine in fact I have two of them so I can pinch one for my resin work it has the attachment that goes onto food containers and yep I have one of them but never use it as over time it does lose pressure so now I have a home made airless pot, it sits on the bench it’s as noisy as the pressure pot setup but it takes up less room and I have the choice of using a large pot or a smaller pot. The difference is it keeps sucking the air out until its all gone so I will have to keep an eye on it but the up side is I have seen a large rectangle dish that goes with my food saver machine so I could place larger longer flatter moulds into that dish which can also sit on the heat mat. Best part is it cheaper than the airless machine here in Australia but I have the options of using different dishes which one type would be perfect as it also fits on the heat mat and the dish will act as a tray for a number of moulds that can be done all at the same time. This is the 3rd review I have seen of this airless and it’s actually the best review that’s been done because you have taken the time to compare it with the pressure pot and the heat mat and with out anything. I think this is why I actually thought about my food saver which only cost me $50 + AUS the pots were a gift so no cost there, the rectangle dish will cost me $47.95 AUS. My compressor cost me $598 AUS but the pressure pot only cost me $49.95 AUS as it was on special at the time. When I priced up the Airless here in Australia comes to $221.76 AUS so yep I think my food saver will work very well for me, it’s already paid for it’s self as I have had it now for 12 years🙀🙀 Thank you for a really great in-depth review. 🤗🤗🤗

Excellent! A controlled experiment was a brilliant idea. Thanks.

I got mine 2 weeks ago and I love it. The only problem I had was it liked to travel across my work surface 😂 but I find it great and easy to use. Being disabled it is just the ticket.

I built a vac chamber similar to yours. The difference is I used a thick clear plastic container. I don’t mind the noise.

That was a great experiment. Very interesting to see the different results. Thanks for sharing this!

Thank you for Al the information!! My choice would most definitely be the pressure pot. It makes pieces flawless!!

Very informative and you explain things in details, Ms Wendy. Loved to see the difference in the results of different methods.Keep up the good work, got yo see a glimpse of your workshop, it's amazing 😍.I will tell you one thing about myself, I am creating in my bedroom in a very tiny space ,I guess it's 20 by 20 inches,but I am having fun with resin and seeing you all creating makes me happy and motivates.God bless you 🙏💜 and thank you so much for sharing this video 💖

Great demo, Wendy!❤

Sorry I missed the premiere, but as always a great video very informative and none biased review of the airless thanks so much xx

Thanks for the info, Wendy.

Thankyou so much for showing the pros and cons of the different methods. This was a great tutorial ❤

Fantastic video Wendy, so informative ❤

Love ALL of your crafts ! ❤ You are sooo patient and creative!

You have one of the best videos comparing all the different methods. I'm very new in resin and considering buying the Resin Bubble Remover Machine for my small projects. Very detailed and I learned a few tips as well that helped me. Thank you.

Thank you so much for sharing hugs Shelley ❤❤❤

Thank you so kindly for sharing your wonderful talent and video. I was going to do my first pour today, however many windshield replacement shops called me and I had to go pick up glass for other resin projects to do. 37 Celsius here. Hot hot hot drove in convertible with with top down and A/C on. Music blaring and enjoying every second. Wendy you are a absolute delight to watch. Tomorrow I will be pouring. I took a board my window size glued on 4 inch thick memory foam. I cut a area in board and foam to fit a fan .Have fan on table stuffed into opening to suck air out of my room to outside. I'm so ready for this adventure, not to mention 12 gallons of different pouring depths resin, mica powders, resin dyes, alcohol inks and every embellishments under the sun molds coming out of my ying yang lol. Lots of lets resin silicone. Woohoo I believe im ready. You are definitely and Claire, Tracey, Daniel and Steve McDonald to in my top list of resin artists to learn from. What is it with you wonderful U.K. artists ❤❤❤❤❤

I bought one two weeks ago, its good so far.

Great Video I am really tempted to get one loved the comparisons between the 4 crystal baubles

Thanks for the review. I would do 2 runs like you did without releasing pressure to get better results. I don't do enough resin to justify getting a pot

Great information Wendy thank you x

Awesome 😊, I have seen a few videos on these now and I think I'll definitely be getting one, really convenient size and price for me

Thankyou for all the information

That was very informative and I really needed this, thank you👍🏻❤️

Very good and helpful video!

great comparisions.

Thank you so much for testing all of this. I know I add a lot of bubbles when I stir by hand. I have the resiners machine and I love it. I will say it is not good with table top epoxy resin. I just bought casting resin and tried it tonight. I am so happy with the outcome. I strongly recommend using plastic cups like the ones sent with the machine. My silicone mixing cup added bubbles when I used it in the machine. I separated the resin into two hard type cups and it worked really well. I had 6 oz. of resin. ❤❤❤ I love your videos.

Great tutorial. The big pressure pot has come down a lot lately. Basically same price as the small one. So most likely I’ll end up with both and keep the big one downstairs in the gaming room. I like both but for larger pieces I want the big one. For the silk type molds its perfect as the entire thing can go in and be debubbled and we all know how bubbles get trapped in those. Again a great video. ❤ this. Thanks for showing the differences.

Thanks for showing differences . I have a vacuum chamber, so would have loved to have seen the results with that. Great video has always though, thanks.

Thanks

I ❤ all your videos I hit like b4 you even start

Thanks for experimenting. I would be really interested in seeing how regular resin would do in this experiment. What the difference would be between the pressure pot and a heating mat when the resin did have time to release air bubbles. Don’t suppose you’d like to try????🙏

Great video Wendy. Always great seeing you experimenting

Hi Wendy great comparison iv been th8nking about a pressure pot for so long but the size and the noise has been putting me off, so I have been thinking about the airless , think this is the better option for me just now anyway, thanks for sharing ❤❤❤ xxx

Hey Wendy for some reason I can't type in live chat but I've thanked Claire and wanted to thank you as you've both inspired me so much that the other day I had a stall at a craft fair and it went really well so thank you for being so inspirational ❤

Very interesting experiment Wendy 🤔 This new vacuum chamber is handy, easy to use and the results are quite good, but the preasure pot is the best choice if we want no bubbles for sure in the final result. Thanks for this valuable information Wendy! Have a great day!

Ok… so when I saw that it was on sale for Prime Day, I went ahead and got it. I have to wait for 2 weeks though since the post to my APO is slow

It’s on sale for Amazon Prime days for $119.

Wendy, I have ask, why didn't you test the airless with the resin in the molds like you did with the pressure pot? Seems to me that would have been one more step that might have been the closest result to your pressure pot. I'm probably missing something here because I don't resin (yet) but it just seems like that would have been the next logical test. Thx for sharing your talent, creativity and experience with us!💜

Thank you Wendy. I love your videos and definitely still learning the art of resin. Still scary but still having fun screwing up. I have been mostly using Let's Resin resin but I recently purchased Teexpert to give it a try. I was reading the insert and to decrease bubbles they alao recommend heating up your mold (and give no further instructions). I have not heard that from no one yet. What are your thoughts? 🤔🧐

Thanks I have just ordered the Airless. It’s costing me $250 Australian by the time you work out the exchange rate 😖😭😩😡

Great tutorial, thanks you for experimenting with all the gadgets. I been thinking on purchasing a pressure pot. But question can you use the pressure pot just to remove bubbles then pour in mold and use on heat mat or is it best to mix pour resin in mold then pressure pot for as long as cure time is noted for the resin?

Have you ever testing a plant dryer curing resin faster? (Sorry my english) I am thinking tested it, but there is so difficult get resin so i don't want waist it so far 😅

Have you tried putting the pressure Pot on the heat mat 🤔🤔🤔🤔🤔🤔

Cool video Wendy very interesting. I’m like you I love my pressure pot I have the 40L one which cost an arm and a leg when I got it but it’s earned it’s place in my resin workshop. Drop me a message if you fancy selling your vacuum pot I could be interested xx

One question, how does it compare to a regular vacuum chamber

I love your fox mold, I searched for it but couldn’t find it. I looked a the uk link but it’s not there. Sadly It’s not worth purchasing from America as the postage costs more than the product. I’m in Australia.