No Crank, No Start Fix! Chrysler 300, Dodge Charger, Magnum, Challenger 

Thanks bro I really appreciate your comment!! Good luck with getting your car back to normal! Let me know if there’s anything you have questions about while trying to figure it out. 💯💯🤝

Thanks bro I appreciate the comment 💯💯

Yes, this has been known to cause intermittent starting issues. 💯💯🤝

I guess so eh. Haha yes that neon was my first car. It just hangs out in the driveway now a days. 😂 thanks for the comment bro! Have a good one!! 💯🤝

Which engine ground wire was it?

@@xXxDjRhym3sxXx I can't really say. They all looked like they were connected correctly. I resolved it by making a new ground wire and connecting it from the inner fender to a bolt on the engine. I fried a wire to something in the process, so I replaced it also and everything worked.

Does any lights come on? Any DTCs? How does the ignition switch feel, normal, or loose? Hope you figure it out bro! If not hmu with some more details and I’ll try to help ya go in the right direction 💯🤝

@colin7761 everything as usual, i turn ignition, then trying to start the engine. radio turning off automatically, but engine just not crank. i don't know where else to check,

@@colin7761 DTC p6088

Check fuse 10 and 20. Make sure they are good. Find out what is missing from the relay circuit that is preventing the starter relay from engaging. Pins 85 and 86 at the relay will power the relay up. How exactly did you short the relay, did you power up the relay to see if it’s working? With the key on engine off, pin 85 at the fuse box should see positive. During crank 86 should see a negative. Good luck bro! 💯💯🤝

What codes does your car have bro, does it stall anytime or does it happen after filling up the tank?

Yea bro it turn off it gives me a limp mode

@@PatricioRamirez619 Daym bro. Do you have a code reader to see what codes are present? I’d also check under the hood and at the pcm and make sure no connectors or connections are loose

did you fix ur problem?I have a chrysler 300c 05 and it was shutting off and going into limp mode and also when i was pressing the gas pedal to an extent it felt like it was preventing mem i changed the throttle body and postiton sensor idk whatb else to do, it says it needs the ecm too be reprogrammed

Camshaft sensor

You mean aeswave? Because this video is for regular people looking how to figure it out at home. Not everyone has expensive professional equipment at their disposal. 🤷‍♂️ 🤦‍♂️ 💯💯