No heat? Fix Your Dryer. Stop Your Thermal Cutoff from constantly failing

Подписаться 28

50% 1

My electric dryer had no heat. The thermal cutoff kept failing constantly. I would replace it only for it to fail days later. I figured out what was happening after trying to fix other things.
If you want to keep on doing, subscribe at www.youtube.com...
#dryer #repair #thermalcutoff

Опубликовано:

6 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2

@ZhmiKnopa 6 месяцев назад

That wire isn’t corroded, it’s overheated. Probably from a failing switch, but if you can’t find the problem you could have a lint fire. Check all your grounds and lake sure the wall cord is grounded to the machine d properly. Resistance can melt wires all over the place.

@youdoer 6 месяцев назад

Thanks so much. Yes the wire connector end did look overheated. It seems to have been corrosion/rust as well which may have caused the overheating. I also cleaned out the lint in the dryer and exhaust. Tried to seal air leaks which I think was a stretch. Thanks for mentioning the ground as well. At one point, my dryer cord did get damaged I think when I was moving the dryer away from the wall to unplug it! The connection point at the dryer loosened and caused issues and so I replaced it. Somehow the anchoring clamp to keep the power cord in place when pulled was missing. I really appreciate your comment.