No Start, No Compression V twin INTEK Briggs and Stratton 

So, thank you for the video. Friends mower ran out of oil but the cams are still moving but pistons are not…haven’t removed it from the mower yet but likely a crank shaft or connecting rod I’m guessing. You did a great job showing yet another DIY guy at home how to diagnose. Thank you. Turns out the mower shop he took it to for a “tune up” didn’t put oil back in it. Broken connecting rods and parts laying in the oil pan. Your video was very informative and helpful.

Happy Holidays folks. Thanks for the education and entertainment in 2023.

Great video thank you ….. that was an implosion

Wow. Amazing how a $5 quart of oil could have kept a $900 engine from turning into that mess of metal. I was tickled to see you try out that 5-in-1 tool suggestion. I found putting the width of blade against a large length of the gasket seam spreads the force over a larger area. Kinda like a mason using kneeling boards/floats when troweling a concrete floor, or a hiker in Canada using snowshoes in the winter. Keeps you from sinking into the snow/concrete/aluminum. Happy Holidays to you Mr and Mrs T-Bone.

I cut a hole in my engine bench for the haft on the vertical engine to go through. It makes it nice I believe, I can even start it on my bench.

Thank you for the tip and thank you for the video

Thanks for another great video Mr. T-Bone. I enjoy your channel and learn so much. Say hello to your lovely bride for me. Be blessed.

Great video

Appreciate the video. Merry Christmas from the UK.

Now that is what you call chewed up, what a mess! Maintenance, maintenance, maintenance and she will keep going.

Boy, what a mess! I love the vids. Merry Christmas and Happy New Year.

👍👍👍 Christmas wishes to both and your family. Thank you

Great video! WOW and YIKES on the motor!

I currently have an 18.5 intek that runs great sitting around.

Now that was chewed up T- Bone, sure pleased you shared this with us I've never seen a small engine as bad as that 👌👍, Merry Christmas to you and Mrs T-bone

TBone here's wishing you and Mrs. TBone a very Merry Christmas and a Happy New Year! From Rockingham, NC. PS: Love ya'll two's videos!!🤙

Thanks T-Bone

At 6:05 I thought - yup, that's done.

'Happy Holidays 🎄🎅🎉 to the Raley Family'.

It sure did a number on it, at least you have some parts now to help someone out with. From John and Lisa to you and Mrs T-Bone, have a Blessed and Merry Christmas. Ken's Small Engine Repair is having as Christmas Live Stream tomorrow at noon EST, come join us brother.

Ok, Im missing your videos!

That engine reminds me of my Kohler Discourage 19

Kaboom that motor went.

T-Bone, order you some Taryl putty and fix that engine case....😉 Merry Christmas to you and the wife!

Merry Christmas brother

That 5 in 1 came out of my work trailer…2009. Hahaha.

Been there a few times. Same carnage. Mikel

Wow! Never seen one that bad Tbone..

Hope all's well, needing my fixed for another video!👍

Merry christmas

Mary chrismiss for Canada 🇨🇦

No compression on an intek, without watching I’m guessing either valve issues or a bad cam. Ok after watching, it was a cam issue from a grenaded rod. I have seen so many of these grenaded inteks - mostly single cylinder, they seem to be worse. As bad as they are, they are still better than a kohler courage, the infamous “bucket” engine.

Get a real kick out of the included animal clips. My Intek 13hp died and I just checked...no compression. Guess I'll break it down and see what may have happened. Do you have a favorite engine about this size?

I've never seen one that bad ever

It's toast. 😮

It's so easy to check the oil and they never do 😮

Good morning T-bone,,what happens when your battery doesn't charge on your sit down lawn mower..🍺🍺🍺🍺😜

Did it turn Over when installed before removed just curious , I have 24hp vtwin briggs that cranks over great and if I spray carb cleaner thru breather it will attempt and then stop cranking unless I release key and try again etc... just curious fuel is getting to carb, have spark etc...

Merry Christmas Papa Raley! 🎅🎅🎄🎄

Ohh darn.I hoping you had good motor.does kohler courage motor fit on z225 0turn? It's 20 hp.

i need that carb and intake and fuel pump and the whole top fan shrould have you still got it

Well, another one bites the dust. Ya right, not worth fixing.

*WOW* what an f'd up motor.

Nobody ever checks the oil

Loose oil filter And loose oil change drain 😮😮

I think you gave up on that tooooooooo easy T-Bone 🤣🤣🤣🤣

yes I belive it was junk.

Whelp that motors trash